Firmware Whitecat N1 ESP32 DEVKIT with OTA
| File systems | FAT, RAMFS, SPIFFS. |
| Lua modules | adc, bt, can, cjson, cpu, encoder, event, fs, gdisplay, i2c, lora, mqtt, neopixel, net, nvs, pack, pio, pwm, sdisplay, sensor, servo, socket, spi, stepper, thread, tmr, uart, ulp. |
| Networking | WiFi. |
| Network services | CAN gateway, Captive DNS, HTTP server, OTA updates, SNTP. |
| Sensors | 10K Thermistor, 2P toggle switch, 2Y0A21, 3P toggle switch, 4x4 key matrix, A49E, Analog joystick, BDE0600G, BH1620FVC, BH1721FVC, BME280, DHT11, DHT22, DHT23, DS1820, GPS, GUVA S12SD, Hall flow sensor, Hall internal, Hall switch, LDR, LM35, Linear potentiometer, ML8511, PING28015, PIR AM412, Push switch, Relative rotary encoder, SDS011, TMP36, Tilt switch, US015. |
| CAN | Signal | GPIO |
|---|---|---|
| 0 | RX TX |
GPIO35 GPIO25 |
| I2C | Signal | GPIO |
|---|---|---|
| 0 | SCL SDA |
GPIO32 GPIO33 |
| 1 | SCL SDA |
GPIO2 GPIO15 |
| SPI | Signal | GPIO |
|---|---|---|
| 2 | MISO MOSI CLK |
GPIO12 GPIO13 GPIO14 |
| 3 | MISO MOSI CLK |
GPIO19 GPIO23 GPIO18 |
| UART | Signal | GPIO |
|---|---|---|
| 0 | RX TX |
GPIO3 GPIO1 |
| 1 | RX TX |
GPIO26 GPIO25 |
| 2 | RX TX |
GPIO2 GPIO15 |
| SDSPI | Signal | GPIO |
|---|---|---|
| SPI2 | MISO MOSI CLK CS |
GPIO12 GPIO13 GPIO14 GPIO21 |
| Display signal | GPIO |
|---|---|
| MISO MOSI CLK CS RST CMD BCKL* |
GPIO19 GPIO23 GPIO18 GPIO13 GPIO14 GPIO12 Not used |
* back light
| Touch panel signal | GPIO |
|---|---|
| MISO MOSI CLK CS |
GPIO19 GPIO23 GPIO18 GPIO16 |
| Signal | GPIO |
|---|---|
| SCL SDA |
GPIO32 GPIO33 |
Lua RTOS is free for you, but funds are required to make this possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.
