Skip to content

DHT11 SENSOR

Jump to bottom
Jaume Olivé Petrus edited this page Aug 25, 2017 · 38 revisions

Specification

What Comments
Identifier DHT11
Interface GPIO 1 pin
Provides temperature celsius degrees
humidity % relative humidity
Properties none
Datasheet

Code

-- Attach DHT11 to  GPIO26
s = sensor.attach("DHT11", pio.GPIO26)

while true do
  print("temp: "..s:read("temperature")..", hum: "..s:read("humidity"))
  tmr.delayms(500)
end

Lua RTOS is free for you, but funds are required to make this possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.

paypal

Clone this wiki locally