Skip to content

Step Record

Jump to bottom
Steven Noreyko edited this page Feb 18, 2023 · 2 revisions

Step Record

(SH-101-ish style note entry)

Holding F1 + a Pattern Key will enter Step Record Mode.

Enter notes from the keyboard and the sequence step will automatically advance to the next step. Change knob 1-4 positions to set a CC parameter lock for that step. Knob #5 (far right) will enter a velocity value for that step (there is no visual feedback when entering values from the knobs.

If you want to skip steps while entering notes, use the encoder button to select the STEP parameter and rotate to the step you want to change/update. While a step is selected, you can also record plocks/velocity for that step with the knobs without changing the note value.

There are two pages of parameters in Step Record. First is the current octave (OCT), step number (STEP), note-value (NOTE), and pattern number (PTN). Second shows the step event parameters TYPE, PROB and COND as described above.

Press AUX to exit Step Record.

Keys/Commands:

  • Potentiometers 1-4 set a CC parameter lock
  • Potentiometers 5 sets a step velocity
  • AUX exit this sub-mode

Home

Clone this wiki locally