Configure Seeed Xiao S3 RX enable pin #11338

Job	Run time
setup (esp32)	8s
setup (esp32s3)	2s
setup (esp32c3)	4s
setup (esp32c6)	5s
setup (nrf52840)	4s
setup (rp2040)	4s
setup (stm32)	4s
setup (check)	5s
package-raspbian / build-raspbian / build-raspbian	25s
package-native / build-native / build-native	19s
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l	48s
check (rak11200)	7s
check (heltec-v3)	5s
check (t-deck)	6s
build-esp32-s3 (heltec-wireless-tracker) / build-esp32-s3	8s
build-esp32-s3 (t-watch-s3) / build-esp32-s3	4s
build-esp32-s3 (tracksenger) / build-esp32-s3	10s
build-esp32 (m5stack-core) / build-esp32	4s
build-esp32 (radiomaster_900_bandit_nano) / build-esp32	7s
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3	6s
build-esp32 (trackerd) / build-esp32	5s
build-esp32-c6 (tlora-c6) / build-esp32-c6	5s
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3	5s
build-nrf52 (feather_diy) / build-nrf52	4s
build-nrf52 (rak2560) / build-nrf52	5s
build-nrf52 (tracker-t1000-e) / build-nrf52	4s
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040	5s
build-rpi2040 (picow) / build-rpi2040	4s
build-rpi2040 (rp2040-lora) / build-rpi2040	4s
build-stm32 (rak3172) / build-stm32	5s
build-stm32 (wio-e5) / build-stm32	7s
package-native / package-native	0s
package-raspbian / package-raspbian	0s
gather-artifacts	0s
package-raspbian-armv7l / package-raspbian_armv7l	0s
release-artifacts	0s
release-firmware	0s
after-checks	0s
	3m 58s

Provide feedback