Configure Seeed Xiao S3 RX enable pin #11338
Triggered via pull request
December 7, 2024 02:35
mgranberry
mgranberry
synchronize
#5517
Status
Failure
Total duration
1m 27s
Artifacts
–
main_matrix.yml
on: pull_request_target
Matrix: setup
package-native
/
...
/
build-native
19s
package-raspbian-armv7l
/
...
/
build-raspbian-armv7l
48s
package-raspbian
/
...
/
build-raspbian
25s
Matrix: build-esp32-c3
Matrix: build-esp32-c6
Matrix: build-esp32-s3
Matrix: build-esp32
Matrix: build-nrf52
Matrix: build-rpi2040
Matrix: build-stm32
Matrix: check
package-raspbian-armv7l
/
package-raspbian_armv7l
0s
Matrix: gather-artifacts
after-checks
0s
Matrix: release-firmware
Annotations
46 errors and 51 warnings
|
package-native / build-native / build-native
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
package-native / build-native / build-native
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (m5stack-core) / build-esp32
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32 (m5stack-core) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (t-watch-s3) / build-esp32-s3
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32-s3 (t-watch-s3) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c6 (tlora-c6) / build-esp32-c6
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32-c6 (tlora-c6) / build-esp32-c6
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (feather_diy) / build-nrf52
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-nrf52 (feather_diy) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-nrf52 (tracker-t1000-e) / build-nrf52
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (tracker-t1000-e) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-stm32 (rak3172) / build-stm32
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-stm32 (rak3172) / build-stm32
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (rp2040-lora) / build-rpi2040
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-rpi2040 (rp2040-lora) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (rak2560) / build-nrf52
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-nrf52 (rak2560) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (trackerd) / build-esp32
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32 (trackerd) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (picow) / build-rpi2040
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-rpi2040 (picow) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (radiomaster_900_bandit_nano) / build-esp32
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32 (radiomaster_900_bandit_nano) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3
The process '/usr/bin/git' failed with exit code 128
|
|
package-raspbian / build-raspbian / build-raspbian
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
package-raspbian / build-raspbian / build-raspbian
The process '/usr/bin/git' failed with exit code 128
|
|
build-stm32 (wio-e5) / build-stm32
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-stm32 (wio-e5) / build-stm32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (tracksenger) / build-esp32-s3
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32-s3 (tracksenger) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (heltec-wireless-tracker) / build-esp32-s3
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
build-esp32-s3 (heltec-wireless-tracker) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
check (t-deck)
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
check (t-deck)
The process '/usr/bin/git' failed with exit code 128
|
|
check (rak11200)
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
check (rak11200)
The process '/usr/bin/git' failed with exit code 128
|
|
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l
The process '/usr/bin/git' failed with exit code 128
|
|
check (heltec-v3)
No url found for submodule path 'lib/device-ui' in .gitmodules
|
|
check (heltec-v3)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (esp32s3)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (esp32c6)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (stm32)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (check)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (nrf52840)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (esp32c3)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (rp2040)
The process '/usr/bin/git' failed with exit code 128
|
|
setup (esp32)
The process '/usr/bin/git' failed with exit code 128
|
|
package-native / build-native / build-native
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (m5stack-core) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (m5stack-core) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (t-watch-s3) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (t-watch-s3) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c6 (tlora-c6) / build-esp32-c6
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c6 (tlora-c6) / build-esp32-c6
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (feather_diy) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (feather_diy) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (tracker-t1000-e) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (tracker-t1000-e) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-stm32 (rak3172) / build-stm32
The process '/usr/bin/git' failed with exit code 128
|
|
build-stm32 (rak3172) / build-stm32
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (rp2040-lora) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (rp2040-lora) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (rak2560) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-nrf52 (rak2560) / build-nrf52
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (trackerd) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (trackerd) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (picow) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (picow) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (radiomaster_900_bandit_nano) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32 (radiomaster_900_bandit_nano) / build-esp32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3
The process '/usr/bin/git' failed with exit code 128
|
|
package-raspbian / build-raspbian / build-raspbian
The process '/usr/bin/git' failed with exit code 128
|
|
build-stm32 (wio-e5) / build-stm32
The process '/usr/bin/git' failed with exit code 128
|
|
build-stm32 (wio-e5) / build-stm32
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (tracksenger) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (tracksenger) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (heltec-wireless-tracker) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
build-esp32-s3 (heltec-wireless-tracker) / build-esp32-s3
The process '/usr/bin/git' failed with exit code 128
|
|
check (t-deck)
The process '/usr/bin/git' failed with exit code 128
|
|
check (rak11200)
The process '/usr/bin/git' failed with exit code 128
|
|
check (t-deck)
The process '/usr/bin/git' failed with exit code 128
|
|
check (rak11200)
The process '/usr/bin/git' failed with exit code 128
|
|
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l
The process '/usr/bin/git' failed with exit code 128
|
|
check (heltec-v3)
The process '/usr/bin/git' failed with exit code 128
|
|
check (heltec-v3)
The process '/usr/bin/git' failed with exit code 128
|