Merge branch 'docs/add-3dp-case' into 'master'

Docs/add 3dp case

See merge request face-recognition-framework/esp-who!83

docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md

@@ -28,6 +28,7 @@
  - [5.2. Schematic](#52-schematic)
  - [5.3. PCB Layout](#53-pcb-layout)
  - [5.4. Dimensions](#54-dimensions)
+ - [5.5. 3D Printed Case](#55-3d-printed-case)
 
 This user guide will help you get started with ESP32-S3-EYE v2.2 and will also provide more in-depth information.
 
@@ -223,6 +224,7 @@ This section provides instructions on how to do hardware/software setup and flas
 
 - 1 x MicroSD card
 - 1 x Li-ion battery
+- 1 x [3D Printed case](#55-3d-printed-case)
 
 > **Notice**
 >
@@ -339,4 +341,19 @@ In case this issue occurs, you need to:
 - [ESP32-S3-EYE-MB v2.1 Main Board Back Dimensions Source File](https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-EYE_MB_Bottom_V2.1_20211111.dxf) (DXF) - You can view it with [Autodesk Viewer](https://viewer.autodesk.com/) online
 - [ESP32-S3-EYE-SUB Sub Board Dimensions Source File](https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-EYE_SUB_V1.1_20211111.dxf) (DXF) - You can view it with [Autodesk Viewer](https://viewer.autodesk.com/) online
 
+## 5.5. 3D Printed Case
+
+The following 3D model is a two-part case you can 3D print for your ESP32-S3-EYE. Do note that with all 3D Printed products, there will be a variance in tolerance and fitting. Your success may vary.
+
+- [ESP32-S3-EYE Top Case](../../_static/get-started/ESP32-S3-EYE_3dpcase_top.STL)
+- [ESP32-S3-EYE Bottom Case](../../_static/get-started/ESP32-S3-EYE_3dpcase_btm.STL)
+
+<center>
+
+|![ESP32-S3-EYE - Case 3D printed on BambuLab P1S](../../_static/get-started/S3-eye_banner_photo.png)| 
+|:--:| 
+|ESP32-S3-EYE - Case 3D printed on [BambuLab P1S](https://bambulab.com/en/p1)|
+
+</center>
+
 For further design documentation for the board, please contact us at [<[email protected]>]([email protected]).

docs/zh_CN/get-started/ESP32-S3-EYE_Getting_Started_Guide.md

@@ -28,6 +28,7 @@
  - [5.2. 原理图](#52-原理图)
  - [5.3. PCB 布局图](#53-pcb-布局图)
  - [5.4. 尺寸图](#54-尺寸图)
+ - [5.5. 3D打印外壳](#55-3D打印外壳)
 
 本指南将帮助您快速上手 ESP32-S3-EYE v2.2，并提供该款开发板的详细信息。
 
@@ -224,6 +225,7 @@ ESP32-S3-EYE 出厂即烧录[默认固件](https://github.com/espressif/esp-who/
 
 - 1 个 MicroSD 存储卡
 - 1 块锂电池
+- 1 套[3D打印外壳](#55-3D打印外壳)
 
 > **注意**
 >
@@ -339,5 +341,21 @@ ESP32-S3-EYE 没有 USB 至 UART 桥接器，可能会出现已烧写的程序
 - [ESP32-S3-EYE-MB v2.1 主板背面尺寸图源文件](https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-EYE_MB_Bottom_V2.1_20211111.dxf) (DXF) - 可使用 [Autodesk Viewer](https://viewer.autodesk.com/) 查看
 - [ESP32-S3-EYE-SUB 子板尺寸图源文件](https://dl.espressif.com/dl/schematics/DXF_ESP32-S3-EYE_SUB_V1.1_20211111.dxf) (DXF) - 可使用 [Autodesk Viewer](https://viewer.autodesk.com/) 查看
 
+
+## 5.5. 3D打印外壳
+
+以下的3D模型是一个由两部分组成的外壳，您可以为您的ESP32-S3-EYE 3D打印出来。请注意，所有3D打印产品会有公差差异。您的成功记录可能会有所不同。
+
+- [ESP32-S3-EYE 上壳](../../_static/get-started/ESP32-S3-EYE_3dpcase_top.STL)
+- [ESP32-S3-EYE 下壳](../../_static/get-started/ESP32-S3-EYE_3dpcase_btm.STL)
+
+<center>
+
+|![ESP32-S3-EYE - 外壳 在拓竹P1S上3D打印](../../_static/get-started/S3-eye_banner_photo.png)| 
+|:--:| 
+|ESP32-S3-EYE - 外壳 在[拓竹P1S上3D打印](https://bambulab.cn/zh-cn/p1)|
+
+</center>
+
 有关本开发板的更多设计文档，请联系我们的商务部门 [<[email protected]>]([email protected])。