Fixed typos and added url

docs/en/get-started/ESP32-S3-EYE_Getting_Started_Guide.md

@@ -28,7 +28,7 @@
  - [5.2. Schematic](#52-schematic)
  - [5.3. PCB Layout](#53-pcb-layout)
  - [5.4. Dimensions](#54-dimensions)
- - [5.5 3D Printed Case](#55-3d-printed-case)
+ - [5.5. 3D Printed Case](#55-3d-printed-case)
 
 This user guide will help you get started with ESP32-S3-EYE v2.2 and will also provide more in-depth information.
 
@@ -352,11 +352,8 @@ The following 3D model is a two-part case you can 3D print for your ESP32-S3-EYE
 
 |![ESP32-S3-EYE - Case 3D printed on BambuLab P1S](../../_static/get-started/S3-eye_banner_photo.png)| 
 |:--:| 
-|ESP32-S3-EYE - Case 3D printed on BambuLab P1S|
+|ESP32-S3-EYE - Case 3D printed on [BambuLab P1S](https://bambulab.com/en/p1)|
 
 </center>
 
-
-
-
 For further design documentation for the board, please contact us at [<[email protected]>]([email protected]).

docs/zh_CN/get-started/ESP32-S3-EYE_Getting_Started_Guide.md

@@ -28,7 +28,7 @@
  - [5.2. 原理图](#52-原理图)
  - [5.3. PCB 布局图](#53-pcb-布局图)
  - [5.4. 尺寸图](#54-尺寸图)
- - [5.5 3D打印外壳](#55-3D打印外壳)
+ - [5.5. 3D打印外壳](#55-3D打印外壳)
 
 本指南将帮助您快速上手 ESP32-S3-EYE v2.2，并提供该款开发板的详细信息。
 
@@ -353,10 +353,9 @@ ESP32-S3-EYE 没有 USB 至 UART 桥接器，可能会出现已烧写的程序
 
 |![ESP32-S3-EYE - 外壳 在拓竹P1S上3D打印](../../_static/get-started/S3-eye_banner_photo.png)| 
 |:--:| 
-|ESP32-S3-EYE - 外壳 在拓竹P1S上3D打印|
+|ESP32-S3-EYE - 外壳 在[拓竹P1S上3D打印](https://bambulab.cn/zh-cn/p1)|
 
 </center>
 
-
 有关本开发板的更多设计文档，请联系我们的商务部门 [<[email protected]>]([email protected])。