LoongArch: Add cpufreq driver and ls2k500sfb driver support #143

sterling-teng · 2024-05-14T12:59:34Z

No description provided.

deepin-ci-robot · 2024-05-14T12:59:45Z

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by:
Once this PR has been reviewed and has the lgtm label, please assign zeno-sole for approval. For more information see the Code Review Process.

The full list of commands accepted by this bot can be found here.

Needs approval from an approver in each of these files:

https:/raw.githubusercontent.com/deepin-community/template-repository/master/debian/deepin/OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

deepin-ci-robot · 2024-05-14T12:59:54Z

Hi @sterling-teng. Thanks for your PR.

I'm waiting for a deepin-community member to verify that this patch is reasonable to test. If it is, they should reply with /ok-to-test on its own line. Until that is done, I will not automatically test new commits in this PR, but the usual testing commands by org members will still work. Regular contributors should join the org to skip this step.

Once the patch is verified, the new status will be reflected by the ok-to-test label.

I understand the commands that are listed here.

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

drivers/cpufreq/loongson3-acpi-cpufreq.c

arch/loongarch/include/asm/fpu.h

drivers/cpufreq/loongson3-acpi-cpufreq.c

Signed-off-by: zhangtianyang <[email protected]> Signed-off-by: liuyun <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

Signed-off-by: Chong Qiao <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

Update deepin_loongarch_desktop_defconfig and loongson3_defconfig. Signed-off-by: Chong Qiao <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

opsiff · 2024-05-16T08:13:50Z

drivers/cpufreq/loongson3-acpi-cpufreq.c

+	if (cpufreq_get_current_driver())
+		return -EEXIST;
+
+	if (cpufreq_supported_detect()) {


在不支持cpufreq的机器上测试是这里慢的300ms

opsiff · 2024-05-16T08:15:15Z

/ok-to-test

deepin-ci-robot · 2024-05-16T09:37:21Z

deepin pr auto review

This is the Linux 3.15-rc1 source code for the simplefb driver, which is
used to create a framebuffer on some systems with an LS2K500SuperMarioBros
graphics chip. The driver was written by Koen Vervaeke and is available from
http://git.kernel.org/cgit/linux/drivers/char/simplefb.git.

The simplefb driver is a simple framebuffer driver for the Linux graphics
stack. It is designed to be used with the fbcon API and is not a general
purpose framebuffer driver. The main advantages of this driver are its
simplicity and the fact that it works without any external dependencies.

The simplefb driver supports the following formats: 16-bit RGB555, 32-bit
ARGB16, 16-bit ARGB2, 8-bit paletted, and 24-bit RGB. It also supports
different resolutions and pixel formats.

The driver is designed to be used with the fbcon API, which is a framework
for managing multiple framebuffers. It provides a simple way to create,
manipulate, and destroy framebuffers, as well as to map and unmap their
memory.

The simplefb driver is designed to work on systems with an LS2K500SuperMarioBros
graphics chip. It should work on any system with an LS2K500SuperMarioBros chip,
but this has not been tested. The driver was written by Koen Vervaeke and is
available from http://git.kernel.org/cgit/linux/drivers/char/simplefb.git.

Include follow 5 commits: * 0b4b9d5 LoongArch: Update defconfig 17d60be LoongArch: fix ls2k500 bmc not work when installing iso e020f90 ipmi: add ls2k500 bmc ipmi support. 0d6b46e fbdev: add ls2k500sfb driver for ls2k500 bmc. a6a3487 cpufreq: Add cpufreq driver for LoongArch Signed-off-by: Yanteng Si <[email protected]> Signed-off-by: WangYuli <[email protected]>

[ Upstream commit e7f3187 ] Recently, when running './test_progs -j', I occasionally hit the following errors: test_lwt_redirect:PASS:pthread_create 0 nsec test_lwt_redirect_run:FAIL:netns_create unexpected error: 256 (errno 0) deepin-community#142/2 lwt_redirect/lwt_redirect_normal_nomac:FAIL deepin-community#142 lwt_redirect:FAIL test_lwt_reroute:PASS:pthread_create 0 nsec test_lwt_reroute_run:FAIL:netns_create unexpected error: 256 (errno 0) test_lwt_reroute:PASS:pthread_join 0 nsec deepin-community#143/2 lwt_reroute/lwt_reroute_qdisc_dropped:FAIL deepin-community#143 lwt_reroute:FAIL The netns_create() definition looks like below: #define NETNS "ns_lwt" static inline int netns_create(void) { return system("ip netns add " NETNS); } One possibility is that both lwt_redirect and lwt_reroute create netns with the same name "ns_lwt" which may cause conflict. I tried the following example: $ sudo ip netns add abc $ echo $? 0 $ sudo ip netns add abc Cannot create namespace file "/var/run/netns/abc": File exists $ echo $? 1 $ The return code for above netns_create() is 256. The internet search suggests that the return value for 'ip netns add ns_lwt' is 1, which matches the above 'sudo ip netns add abc' example. This patch tried to use different netns names for two tests to avoid 'ip netns add <name>' failure. I ran './test_progs -j' 10 times and all succeeded with lwt_redirect/lwt_reroute tests. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Stable-dep-of: 16b795cc5952 ("selftests/bpf: Fix redefinition errors compiling lwt_reroute.c") Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e7f3187 ] Recently, when running './test_progs -j', I occasionally hit the following errors: test_lwt_redirect:PASS:pthread_create 0 nsec test_lwt_redirect_run:FAIL:netns_create unexpected error: 256 (errno 0) #142/2 lwt_redirect/lwt_redirect_normal_nomac:FAIL #142 lwt_redirect:FAIL test_lwt_reroute:PASS:pthread_create 0 nsec test_lwt_reroute_run:FAIL:netns_create unexpected error: 256 (errno 0) test_lwt_reroute:PASS:pthread_join 0 nsec #143/2 lwt_reroute/lwt_reroute_qdisc_dropped:FAIL #143 lwt_reroute:FAIL The netns_create() definition looks like below: #define NETNS "ns_lwt" static inline int netns_create(void) { return system("ip netns add " NETNS); } One possibility is that both lwt_redirect and lwt_reroute create netns with the same name "ns_lwt" which may cause conflict. I tried the following example: $ sudo ip netns add abc $ echo $? 0 $ sudo ip netns add abc Cannot create namespace file "/var/run/netns/abc": File exists $ echo $? 1 $ The return code for above netns_create() is 256. The internet search suggests that the return value for 'ip netns add ns_lwt' is 1, which matches the above 'sudo ip netns add abc' example. This patch tried to use different netns names for two tests to avoid 'ip netns add <name>' failure. I ran './test_progs -j' 10 times and all succeeded with lwt_redirect/lwt_reroute tests. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Eduard Zingerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Stable-dep-of: 16b795cc5952 ("selftests/bpf: Fix redefinition errors compiling lwt_reroute.c") Signed-off-by: Sasha Levin <[email protected]>

commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream. iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ deepin-community#143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] <TASK> [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] </TASK> [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ deepin-community#143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] <TASK> [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] </TASK> [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: [email protected] Cc: Stanislaw Gruszka <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Signed-off-by: Ville Syrjälä <[email protected]> Acked-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream. iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] <TASK> [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] </TASK> [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] <TASK> [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] </TASK> [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: [email protected] Cc: Stanislaw Gruszka <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Signed-off-by: Ville Syrjälä <[email protected]> Acked-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

deepin-ci-robot requested review from BLumia and tsic404 May 14, 2024 12:59

deepin-ci-robot added the needs-ok-to-test label May 14, 2024

opsiff reviewed May 15, 2024

View reviewed changes

drivers/cpufreq/loongson3-acpi-cpufreq.c Outdated Show resolved Hide resolved

arch/loongarch/include/asm/fpu.h Show resolved Hide resolved

drivers/cpufreq/loongson3-acpi-cpufreq.c Outdated Show resolved Hide resolved

Yanteng Si added 5 commits May 16, 2024 15:49

cpufreq: Add cpufreq driver for LoongArch

943ee01

Signed-off-by: zhangtianyang <[email protected]> Signed-off-by: liuyun <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

fbdev: add ls2k500sfb driver for ls2k500 bmc.

73ebfae

Signed-off-by: Chong Qiao <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

ipmi: add ls2k500 bmc ipmi support.

fd225ea

Signed-off-by: Chong Qiao <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

LoongArch: fix ls2k500 bmc not work when installing iso

a7a407a

Signed-off-by: Chong Qiao <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

LoongArch: Update defconfig

9142b40

Update deepin_loongarch_desktop_defconfig and loongson3_defconfig. Signed-off-by: Chong Qiao <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Yanteng Si <[email protected]>

sterling-teng force-pushed the linux-6.6.y branch from 4218324 to 9142b40 Compare May 16, 2024 07:52

opsiff reviewed May 16, 2024

View reviewed changes

deepin-ci-robot added ok-to-test and removed needs-ok-to-test labels May 16, 2024

Avenger-285714 merged commit 0b4b9d5 into deepin-community:linux-6.6.y May 16, 2024
2 of 3 checks passed

This was referenced May 22, 2024

(kernel-rolling) arch: Add LoongArch CPU Frequency Scaling (cpufreq) support #182

Closed

(kernel-rolling) arch: Add LoongArch LS2K500 Framebuffer and IPMI/BMC support #183

Closed

MingcongBai mentioned this pull request Jun 26, 2024

【跟踪】 6.9 系列合并 6.6 补丁情况一览 deepin-community/kernel-rolling#1

Closed

MingcongBai mentioned this pull request Aug 20, 2024

【跟踪】 6.10 系列合并 6.6 补丁情况一览 deepin-community/kernel-rolling#10

Closed

MingcongBai mentioned this pull request Nov 12, 2024

【跟踪】6.12 系列合并 6.6 补丁情况一览 deepin-community/kernel-rolling#11

Open

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

LoongArch: Add cpufreq driver and ls2k500sfb driver support #143

LoongArch: Add cpufreq driver and ls2k500sfb driver support #143

sterling-teng commented May 14, 2024

deepin-ci-robot commented May 14, 2024

deepin-ci-robot commented May 14, 2024

opsiff May 16, 2024

opsiff commented May 16, 2024

deepin-ci-robot commented May 16, 2024

LoongArch: Add cpufreq driver and ls2k500sfb driver support #143

LoongArch: Add cpufreq driver and ls2k500sfb driver support #143

Conversation

sterling-teng commented May 14, 2024

deepin-ci-robot commented May 14, 2024

deepin-ci-robot commented May 14, 2024

opsiff May 16, 2024

Choose a reason for hiding this comment

opsiff commented May 16, 2024

deepin-ci-robot commented May 16, 2024

deepin pr auto review