[cases] add eval.memcpy and eval.ooo_wb

tests/eval/memcpy/memcpy.S

@@ -0,0 +1,69 @@
+# src: https://github.com/riscv/riscv-v-spec/blob/master/example/memcpy.s
+# modifications:
+# 1. add test to call memcpy
+# 2. add memset to fill memory
+# 3. add exit to finish simulation
+
+.text
+.balign 16
+.globl test
+
+# void *memcpy(void* dest, const void* src, size_t n)
+# a0=dest, a1=src, a2=n
+memcpy:
+    mv a3, a0                        # Initialize a3 with the destination address
+memcpy_loop:
+    vsetvli t0, a2, e8, m8, ta, ma   # Set up the vector configuration for the current loop iteration. 
+                                     # t0 holds the actual vector length processed, a2 is the remaining byte count, 
+                                     # e8 specifies 8-bit elements, m8 for masking, ta and ma for tail and mask agnostic settings
+    vle8.v v0, (a1)                  # Load a vector of bytes from the source address pointed by a1 into vector register v0
+    add a1, a1, t0                   # Increment the source address pointer by the number of bytes processed in this iteration
+    sub a2, a2, t0                   # Reduce the remaining byte count by the number processed in this iteration
+    vse8.v v0, (a3)                  # Store the vector of bytes from vector register v0 to the destination address pointed by a3
+    add a3, a3, t0                   # Increment the destination address pointer by the number of bytes processed
+    bnez a2, memcpy_loop             # Repeat the loop if there are more bytes to copy
+    ret                              # Return from the function
+
+# void *memset(void* dest, int n, size_t len)
+# a0=dest, a1=n, a2=len
+memset:
+    vsetvli a3, zero, e8, m8, ta, ma # Set vector length to max, element width to 8 bits, using mask 'm8'
+    vmv.v.x v8, a1                   # Move the value in a1 (the byte to set) to all elements of vector register v8
+    mv a1, a0                        # Move the destination address from a0 to a1
+
+memset_loop:
+    vsetvli a3, a2, e8, m8, ta, ma   # Set vector length for this loop iteration, element width 8 bits
+    vse8.v v8, (a1)                  # Store 8-bit values from vector register v8 to memory at address in a1
+    sub a2, a2, a3                   # Subtract the number of bytes processed in this iteration from the total count
+    add a1, a1, a3                   # Add the number of bytes processed to the destination pointer
+    bnez a2, memset_loop             # If there are more bytes to process, loop again
+    ret                              # Return from the function
+
+test:
+    addi sp, sp, -4
+    sw ra, 0(sp)
+
+    # fill 0x1001000 with 0x55 x 4096 bytes
+    # a0: void* dest, a1: int n, a2: size_t len
+    lw a0, test_src_start
+    li a1, 0x55
+    li a2, 0x1000
+    call memset
+    # copy 0x1001000 to 0x1000000 with 4096 bytes
+    # a0: void* dest, a1: void* src, a2: size_t n
+    lw a0, test_src_start
+    lw a1, test_dst_start
+    li a2, 0x1000
+    call memcpy
+
+    lw ra, 0(sp)
+    addi sp, sp, 4
+    ret
+
+.section .vbss, "aw", @nobits
+.balign 64
+test_src_start:
+    .zero 4096
+test_dst_start:
+    .zero 4096
+

tests/eval/ooo_wb/ooo_wb.S

@@ -0,0 +1,37 @@
+.text
+.balign 16
+.globl test
+
+test:
+    la t1, test_src_start  # t1 = addr
+    la t2, test_src_end
+    sub t2, t2, t1  # t2 = remaining length
+    xor t3, t3, t3  # t3 = sum
+loop_start:
+    vsetvli t0, t2, e8, m8, ta, ma   # t0 = vl
+    vle8.v v8, (t1)
+    vadd.vi v8, v8, 1
+
+    # scalar workload
+    li t4, 1836311903
+    li t5, 2971215073
+gcd_loop:
+    remu t6, t5, t4
+    mv t5, t4
+    mv t4, t6
+    bnez t4, gcd_loop
+    # end scalar workload
+
+    vse8.v v8, (t1)
+
+    add t1, t1, t0  # incr addr
+    sub t2, t2, t0  # decr length
+    bnez t2, loop_start
+
+    ret
+
+.section .vbss, "aw", @nobits
+.balign 64
+test_src_start:
+    .zero 8192  # 8KB
+test_src_end: