RG280M "ROGUE" Firmware

changes since the last release:

• The volume control has been returned from the master channel since the crashing problem has been corrected when updating the alsa packages, allowing better control of the sound from alsamixer to level the pcm, headphones and master volumes separately.

• Fixed a kernel configuration that did not allow to switch to rootfs backup by pressing X when starting the console.

• The kernel has been patched with the latest generic linux kernel 3.12.74 package.

• DRM functions of superior kernels have been introduced in case in the future it is possible to update the ETNAVIV drivers in 3.12 (this would allow the graphics in Mario 64 port to be seen correctly).

• Updated SDL1 to OD beta version

• SDL2 has been updated from version 2.0.3 to version 2.0.12, thus allowing sound in applications that previously did not support it in the previous version (for example, in Mario 64 port it works perfectly).

• Several packages have been updated, including the compilation form, so they have been optimized.

• Added compatibility with most OPKs that are being released for OD beta.

Note: Recovery.opk is only a simple script that check the partitions in sdcard file system and erase nor personal residual configs, maybe this can help you some time.

RG280M "ROGUE" Firmware

the sound control has been returned directly by PCM, apparently the control by Master was not compatible with some emulators.

If you need to lower the global volume of the console, and I do not mean to lower the volume or increase the volume with the keys, it is if the minimum volume is too high, you can adjust it from alsamixer (sound mixer) in the Headphone channel, This volume level will be saved even if you restart the console, so you can adjust it to your liking.

Instalation

• Do not update from stock or in the stock microsd (change this for a good quality microsd)

• If this is the first time you install ROGUE, first download the SD_IMAGE.bin corresponding to your console model from any of the previous releases and then update with the OPKs present here.

• If it is simply updating the console, you just have to download the OPK update corresponding to your console and run it.

RG280M "ROGUE" Firmware

changed alsasound config
changed poweroff screen mode

RG280M "ROGUE" Firmware

New in this version:

Gmenu2X now save the last rom open and remember the list.

You can now poweroff the screen in anytime when the level brithgness is the minimal, press power vol- again (note: if you poweroff the brithgness the sound only work fine with mp3 player files.)

RG280M "ROGUE" Firmware

fixed haptic retroarch to 100%

The previous value worked fine in pcsx4all, but in retroarch, the strong motor exceeded the value 1 if you had set the vibration to 100%, seeing that it only works below 70% I have readjusted the values so that it does not exceed the value 1 to 100 % so that this does not happen again.

Ninoh-FOX/RG280M_kernel@9ca33c6

NOTE: adding full update package with rg280m tester opk with better console draw. Please, not use update opks in stock system.

RG280M "ROGUE" Firmware

same feactures that RG350

• new in this version:

Many people asked me for this and I have already gotten it to work correctly, now you can turn off the screen at any time, for those who want to listen to music with the console, you just have to go to the minimum brightness with power + vol- and once there return to press power + vol-, to exit just press power + vol+

md5 = 4af3339774d43bdd713875a52c9a8182

sha1 = 3d72d8f171b304940973f9d8455aca5c3d891234