Version 3.3.2

Version 3.3.2, 8 July 2024

• Improve chip testing mode, and give a more direct warning against using chip test mode for headstages
• Flush livenotes file every time a livenote occurs (useful for real-time applications that rely on livenotes)
• Fix XML loading of Port-specific parameters (manual delay, auxiliary digital out assignment) failing after Port A
• Fix intermittent crashing that would occur from hovering cursor in tooltip mode over border between signal types in plot

Version 3.3.1, 5 December 2023

• Add 10, 16, and 20 ms time scale options for Spike Scope
• Fix intermittent Stim Parameters dialog initialization issue that could cause incorrect values to appear
• Append date/timestamp to end of LiveNotes filename to avoid unintentional file overwriting for multi-file recording sessions
• Improve TCP functionality to allow for multiple connections/disconnections to occur without having to restart software
• Add TCP "execute" commands: SaveSettingsFile, LoadSettingsFile, SaveStimulationSettingsFile, LoadStimulationSettingsFile, analogous to already present UI elements.
• Improve test mode: wider acceptable input signal ranges, reduced likelihood of unintentionally entering test mode, and faster chip testing

Version 3.3.0, 23 August 2023

• Improve TCP reception of commands to not duplicate slot connections.
• Add Chip Test Mode.
• Fix issue where for RHD chips, Rescan Ports would not run chip calibration
• Fix 7310 bit files so that for RHS systems, using a sample rate other than default (30 kHz) will no longer cause the software to use the wrong sample rate.
• Fix crashing when attempting to open a new file for recording fails, instead display an error message and stop acquisition.

Version 3.2.0, 3 March 2022

• Allow user to specify which port(s) to read data from in Advanced dialog
• For One File Per Channel file format, when playing back data as it's being written, allow for jumping to the end of data for near-real-time playback
• Support for use of XEM7310 board in Intan controllers to replace XEM6010 and XEM6310
• Allow user to specify use of median instead of average for reference calculations
• Fix various issues with re-recorded playback data dropping data blocks at the end
• Allow user to specify whether or not to use max # of channels possible in synth mode
• Add "Get CurrentTimestamp" and "Get CurrentTimeSeconds" TCP commands
• Improved error detection and reporting for TCP commands
• Various improvements in RHX API including easier use of the API without Qt, and additional utility functions described in Rhythm and RhythmStim documentation.

Version 3.1.0, 6 June 2022

• Fixed memory issue that caused systems with multiple RHD2216 chips to erroneously duplicate channels.
• Added Plotting Mode options in the Performance menu, including a new High Efficiency mode that plots data more efficiently.
• Allowed some elements (including window size, position, and control panel state) of the basic GUI appearance to automatically load/save through QSettings.
• Added current channel name to the Window Title of the Spike Scope, ISI, PSTH, and Spectrogram tools.
• Added current loaded filename to the Window Title of the Probe Map tool.

Version 3.0.6, 1 April 2022

• Fixed bug with FilePerChannel digital ins/outs not being indexed correctly.
• Increase max number of columns to 16.
• Put waveform display in a scroll area so that when too many columns are present to be displayed at once, a scroll bar can be used.

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.3.1

Version 3.3.1, 5 December 2023

• Add 10, 16, and 20 ms time scale options for Spike Scope
• Fix intermittent Stim Parameters dialog initialization issue that could cause incorrect values to appear
• Append date/timestamp to end of LiveNotes filename to avoid unintentional file overwriting for multi-file recording sessions
• Improve TCP functionality to allow for multiple connections/disconnections to occur without having to restart software
• Add TCP "execute" commands: SaveSettingsFile, LoadSettingsFile, SaveStimulationSettingsFile, LoadStimulationSettingsFile, analogous to already present UI elements.
• Improve test mode: wider acceptable input signal ranges, reduced likelihood of unintentionally entering test mode, and faster chip testing

Version 3.3.0, 23 August 2023

• Improve TCP reception of commands to not duplicate slot connections.
• Add Chip Test Mode.
• Fix issue where for RHD chips, Rescan Ports would not run chip calibration
• Fix 7310 bit files so that for RHS systems, using a sample rate other than default (30 kHz) will no longer cause the software to use the wrong sample rate.
• Fix crashing when attempting to open a new file for recording fails, instead display an error message and stop acquisition.

Version 3.2.0, 3 March 2022

• Allow user to specify which port(s) to read data from in Advanced dialog
• For One File Per Channel file format, when playing back data as it's being written, allow for jumping to the end of data for near-real-time playback
• Support for use of XEM7310 board in Intan controllers to replace XEM6010 and XEM6310
• Allow user to specify use of median instead of average for reference calculations
• Fix various issues with re-recorded playback data dropping data blocks at the end
• Allow user to specify whether or not to use max # of channels possible in synth mode
• Add "Get CurrentTimestamp" and "Get CurrentTimeSeconds" TCP commands
• Improved error detection and reporting for TCP commands
• Various improvements in RHX API including easier use of the API without Qt, and additional utility functions described in Rhythm and RhythmStim documentation.

Version 3.1.0, 6 June 2022

• Fixed memory issue that caused systems with multiple RHD2216 chips to erroneously duplicate channels.
• Added Plotting Mode options in the Performance menu, including a new High Efficiency mode that plots data more efficiently.
• Allowed some elements (including window size, position, and control panel state) of the basic GUI appearance to automatically load/save through QSettings.
• Added current channel name to the Window Title of the Spike Scope, ISI, PSTH, and Spectrogram tools.
• Added current loaded filename to the Window Title of the Probe Map tool.

Version 3.0.6, 1 April 2022

• Fixed bug with FilePerChannel digital ins/outs not being indexed correctly.
• Increase max number of columns to 16.
• Put waveform display in a scroll area so that when too many columns are present to be displayed at once, a scroll bar can be used.

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.3.0

Version 3.3.0, 23 August 2023

• Improve TCP reception of commands to not duplicate slot connections.
• Add Chip Test Mode.
• Fix issue where for RHD chips, Rescan Ports would not run chip calibration
• Fix 7310 bit files so that for RHS systems, using a sample rate other than default (30 kHz) will no longer cause the software to use the wrong sample rate.
• Fix crashing when attempting to open a new file for recording fails, instead display an error message and stop acquisition.

Version 3.2.0, 3 March 2022

• Allow user to specify which port(s) to read data from in Advanced dialog
• For One File Per Channel file format, when playing back data as it's being written, allow for jumping to the end of data for near-real-time playback
• Support for use of XEM7310 board in Intan controllers to replace XEM6010 and XEM6310
• Allow user to specify use of median instead of average for reference calculations
• Fix various issues with re-recorded playback data dropping data blocks at the end
• Allow user to specify whether or not to use max # of channels possible in synth mode
• Add "Get CurrentTimestamp" and "Get CurrentTimeSeconds" TCP commands
• Improved error detection and reporting for TCP commands
• Various improvements in RHX API including easier use of the API without Qt, and additional utility functions described in Rhythm and RhythmStim documentation.

Version 3.1.0, 6 June 2022

• Fixed memory issue that caused systems with multiple RHD2216 chips to erroneously duplicate channels.
• Added Plotting Mode options in the Performance menu, including a new High Efficiency mode that plots data more efficiently.
• Allowed some elements (including window size, position, and control panel state) of the basic GUI appearance to automatically load/save through QSettings.
• Added current channel name to the Window Title of the Spike Scope, ISI, PSTH, and Spectrogram tools.
• Added current loaded filename to the Window Title of the Probe Map tool.

Version 3.0.6, 1 April 2022

• Fixed bug with FilePerChannel digital ins/outs not being indexed correctly.
• Increase max number of columns to 16.
• Put waveform display in a scroll area so that when too many columns are present to be displayed at once, a scroll bar can be used.

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.2.0

Version 3.2.0, 3 March 2022

• Allow user to specify which port(s) to read data from in Advanced dialog
• For One File Per Channel file format, when playing back data as it's being written, allow for jumping to the end of data for near-real-time playback
• Support for use of XEM7310 board in Intan controllers to replace XEM6010 and XEM6310
• Allow user to specify use of median instead of average for reference calculations
• Fix various issues with re-recorded playback data dropping data blocks at the end
• Allow user to specify whether or not to use max # of channels possible in synth mode
• Add "Get CurrentTimestamp" and "Get CurrentTimeSeconds" TCP commands
• Improved error detection and reporting for TCP commands
• Various improvements in RHX API including easier use of the API without Qt, and additional utility functions described in Rhythm and RhythmStim documentation.

Version 3.1.0, 6 June 2022

• Fixed memory issue that caused systems with multiple RHD2216 chips to erroneously duplicate channels.
• Added Plotting Mode options in the Performance menu, including a new High Efficiency mode that plots data more efficiently.
• Allowed some elements (including window size, position, and control panel state) of the basic GUI appearance to automatically load/save through QSettings.
• Added current channel name to the Window Title of the Spike Scope, ISI, PSTH, and Spectrogram tools.
• Added current loaded filename to the Window Title of the Probe Map tool.

Version 3.0.6, 1 April 2022

• Fixed bug with FilePerChannel digital ins/outs not being indexed correctly.
• Increase max number of columns to 16.
• Put waveform display in a scroll area so that when too many columns are present to be displayed at once, a scroll bar can be used.

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.1.0

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.

Version 3.0.6, 1 April 2022

• Fixed bug with FilePerChannel digital ins/outs not being indexed correctly.
• Increase max number of columns to 16.
• Put waveform display in a scroll area so that when too many columns are present to be displayed at once, a scroll bar can be used.

Version 3.1.0, 6 June 2022

• Fixed memory issue that caused systems with multiple RHD2216 chips to erroneously duplicate channels.
• Added Plotting Mode options in the Performance menu, including a new High Efficiency mode that plots data more efficiently.
• Allowed some elements (including window size, position, and control panel state) of the basic GUI appearance to automatically load/save through QSettings.
• Added current channel name to the Window Title of the Spike Scope, ISI, PSTH, and Spectrogram tools.
• Added current loaded filename to the Window Title of the Probe Map tool.

Version 3.0.6

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.

Version 3.0.6, 1 April 2022

• Fixed bug with FilePerChannel digital ins/outs not being indexed correctly.
• Increase max number of columns to 16.
• Put waveform display in a scroll area so that when too many columns are present to be displayed at once, a scroll bar can be used.

Version 3.0.5

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.5, 3 February 2022

• Removed unused Context Help buttons from dialogs.
• Reduced latency of spike .dat file writing so that these files are updated as soon as spikes are detected.
• Added option to start software without OpenCL.
• Improved TCP parsing to handle unexpected whitespace in a string of commands.
• Added WriteToDiskLatency setting for users to control.
• Added CreateNewDirectory setting for users to control.
• Fixed displaying 'save to disk' icon for enabled non-amplifier signals (e.g., aux in, digital in, analog in).
• Fixed small memory leak during TCP data streaming.
• Altered 'Rescan Ports' behavior so that if the system went from no headstages to at least one detected, the displayed port will update to the present chip(s).
• Added drag'n'drop option for various settings files.
• Added more descriptive error messages when a Probe Map file is loaded as a general settings file.
• Fixed bug that would only flag channels as spike-TCP enabled if they were also waveform-TCP enabled.
• Removed unusable 'aux in wideband' checkbox hidden for RHS systems, because they don't have aux in channels.
• Added more descriptive error/warning messages when channels loaded from XML file are inconsistent with those currently plugged in.
• Fixed bug where loading data for playback that had aux inputs saved in wideband file wouldn't parse correctly.
• Fixed bug with external fast settling not properly triggering as a result of digital input activity.

Version 3.0.4

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.4, 5 August 2021

• Fixed small memory leak that occurred when saving in the File Per Signal Type file format.
• Improved XML settings file parsing so that files that don't include any headstage channels can still be correctly loaded.
• Minor improvement to make error logging more detailed and efficient.
• Modify episodic triggered recording algorithm to ignore brief trigger-off events.
• Improved optimum SPI delay finding algorithm so that setting delay manually is less likely to be necessary.
• In data file playback mode, electrode impedances are now displayed.
• Fixed issue with external fast settling in RHD systems not properly triggering as a result of digital input activity

Version 3.0.3

Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll

Version 3.0.3, 15 April 2021

• Added 50 ms option to PSTH pre-trigger and post-trigger spans.
• In "One File Per Signal Type" data file format, added option to save auxiliary inputs (e.g., acccelerometer data) in amplifier.dat file.
• Fixed bug that sometimes causes crashing when PC audio was enabled.
• Fixed bug that did not display auxiliary inputs or supply voltages from second headstage when dual headstage adapter was used.
• Expanded OpenCL compatibility to fix problems with OpenCL initialization on some systems.

Version 3.0.2

Intan RHX release notes

• Version 3.0, 11 February 2021

• First release; started with v3.0 to avoid confusion with older Intan software.

• Version 3.0.1, 12 February 2021

• Fixed bug that caused crash during electrode impedance measurement.

• Version 3.0.2, 24 March 2021

• Improvements to Spike Scope:
  • Added RMS display, consistent with old software.
  • Added spike rate display.
  • Number of spikes in recent spike history can now be as high as 500.
  • Each channel's recent spike history is persistent when channels are changed.
  • Added 'Take Snapshot' and 'Clear Snapshot' buttons to permit freezing spike history in background of display on a per-channel basis.
• Added longer post-trigger spans to PSTH tool: 5s, 10s, and 20s.
• Added ability to use analog inputs as digital triggers in PSTH tool.
• Added ability to use analog inputs as digital triggers in Display Trigger (in Trigger tab).
• Added ability to display thresholded analog inputs as digital signals in Spectrogram Tool.
• In data file playback mode, added 'run immediately' option after 'jump to position'.
• Extended range of y-axis spacing between waveforms on waveform display.
• Fixed bug where 'Stop' button was not working during rewinding.
• Fixed bug where the 'Automatically Save Trigger Channel' option in triggered recording was not working.
• Fixed issue where software crashed upon exiting on some Macs.
• Fixed crashing upon software startup with some smaller screens.
• Improvements to TCP output:
  • Added ability to disable and enable individual channels for TCP output while system is running.
  • Improved TCP parser so that path names and file names may include spaces.
  • Fixed TCP output timestamps to match timestamps in recorded data.
  • Fixed issue where TCP data output could fill up software 'Waveform FIFO' buffer under certain conditions.
  • Changed TCP parameter name 'DisplayTriggerAnalogVoltageThresholdVolts' to 'TriggerAnalogVoltageThresholdVolts'.
• Switched to latest version (v5.2.3) of Opal Kelly DLL.
• Changes to support Linux compilation.
• Windows installer:
  • Fixed issue where certain anti-virus programs would interfere with Windows installation.
  • Added additonal DLLs to Windows installation:
    api-ms-win-core-winrt-string-l1-1-0.dll
    api-ms-win-core-winrt-l1-1-0.dll
    OpenCL.dll