The NIST Smart Manufacturing Systems (SMS) Test Bed is physically located in Gaithersburg MD USA. The SMS Test Bed is comprised of three major components:
- Computer-Aided Technologies (CAx) Lab
- Manufacturing Lab
- Data publication web services
This repository contains all technology developed, configurations utilized, and data gathered by the SMS Test Bed. Please visit the SMS Test Bed Information Page for more information about the test bed.
Below is an overview of the organization of this repository.
+---mtconnect (current MTConnect adapter and agent build and configuration)
+---raw (raw unprocessed data collected in the test bed)
+---tdp (Technical Data Packages)
+---README.md (this documentation)
Thomas Hedberg and Moneer Helu are the Coorindators of the SMS Test Bed.
For general questions, please send an email to [email protected].
These World Wide Web pages are provided as a public service by the National Institute of Standards and Technology (NIST). With the exception of material marked as copyrighted, information presented on these pages is considered public information and may be distributed or copied. Use of appropriate byline/photo/image credits is requested.
The use of any software or hardware by the project does not imply a recommendation or endorsement by NIST.
The use of the project results in other software or hardware products does not imply a recommendation or endorsement by NIST of those products.
We would appreciate acknowledgement if any of the project results are used, however, the use of the NIST logo is not allowed.
NIST-developed software is provided by NIST as a public service. You may use, copy and distribute copies of the software in any medium, provided that you keep intact this entire notice. You may improve, modify and create derivative works of the software or any portion of the software, and you may copy and distribute such modifications or works. Modified works should carry a notice stating that you changed the software and should note the date and nature of any such change. Please explicitly acknowledge the National Institute of Standards and Technology as the source of the software.
NIST-developed software is expressly provided “AS IS.” NIST MAKES NO WARRANTY OF ANY KIND, EXPRESS, IMPLIED, IN FACT OR ARISING BY OPERATION OF LAW, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT AND DATA ACCURACY. NIST NEITHER REPRESENTS NOR WARRANTS THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ANY DEFECTS WILL BE CORRECTED. NIST DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF THE SOFTWARE OR THE RESULTS THEREOF, INCLUDING BUT NOT LIMITED TO THE CORRECTNESS, ACCURACY, RELIABILITY, OR USEFULNESS OF THE SOFTWARE.
You are solely responsible for determining the appropriateness of using and distributing the software and you assume all risks associated with its use, including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and the unavailability or interruption of operation. This software is not intended to be used in any situation where a failure could cause risk of injury or damage to property. The software developed by NIST employees is not subject to copyright protection within the United States.