iperf3d is a iperf3 client and server wrapper for dynamic server ports. It aims to be compatible with the iperf3 command line flags to be a replacement for existing applications that use a iperf3 client and server.
The iperf3d server listens on a control port (default 6201) for connections of a iperf3d client. When a client connects, the server will start a iperf3 server in oneshot mode on the next free port in the dynamic port range (default 7000-7999) and tell the port to the client. The client then starts a normal iperf3 client to connect to the received port. The iperf3 server will automatically terminate after the run because of the oneshot-mode.
Usage: iperf3d [OPTIONS] [iperf3_params]...
Arguments:
[iperf3_params]... Arguments that will be passed to iperf3
Options:
-c, --client <TARGET> Enables the client mode to server <TARGET>
-s, --server Enables the server mode
-p, --port <PORT> Port to listen or connect to [default: 6201]
-B, --bind <ADDRESS> Address to bind to, if set, it will also be passed to iperf3
--dstart <PORT> First port of the dynamic port range (the bind port of iperf3d must not be in this range) [default: 7000]
--dend <PORT> Last port of the dynamic port range (the bind port of iperf3d must not be in this range) [default: 7999]
--max-age <SECONDS> Maximum time a single iperf3 server is allowed to run [default: 300]
--ip-limit <NUMBER> Number of concurrent sessions allowed from the same IP [default: 3]
--iperf3-path <PATH> Path to the iperf3 executable (only required if iperf3 is not in $PATH)
-h, --help Print help
-V, --version Print version
If iperf3 not in your $PATH, you can set the path to it via the --iperf3-path option or via the IPERF3D_IPERF3_PATH environment variable. Note: the command line option will override the environment variable.
Like iperf3, you can start a iperf3d server with:
iperf3d -s
The server will then bind to the default port (6201) and will use the default dynamic port range for dynamic iperf3 servers (7000-7999).
Like in iperf3, you can pass a bind-address with -B to iperf3d so that it only binds to the given address. The given address will also be passed to the iperf3 servers.
To change the ports, you can use -p or --port to change the control port (like in iperf) and you can use --dstart and --dend for setting the start and the end port of the dynamic port range.
You can also pass additional iperf3 arguments just by putting them behind the iperf3d options.
As a Denial-of-Service protection, the maximum lifetime of dynamic iperf3 server and the maximum dynamic iperf3 servers per client IP are limited.
The default maximum lifetime is 300 seconds (5 minutes) and the default limit for concurrent sessions for one IP is 3. You can adjust this limits with the --max-age and --ip-limit options.
Like iperf3, you can connect to a iperf3d server with:
iperf3d -c [address]
The client will then perform a iperf3 to the dynamic server received from the iperf3d server.
You can also specify a different port of the iperf3d server by using -p or --port.
Like in the server mode, you can also pass additional iperf3 arguments just by putting them behind the iperf3d options, for example for limiting the bitrate:
iperf3d -c [address] -b 100M