How to connect the FPC connector

V2.0 Camera module FPC Connection

1. Put the latch in relax state

2. Insert the FPC cable

3. Lock the FPC connector

4. Make sure the FPC is not tilted

Pre v2.0 Camera module FPC Connection

1. Lift the FPC connector

2. Insert the FPC cable

3. Lock the FPC connector

RPI5 FPC Connection

There are two FPC connector on the RPI5, CAM/DISP0 and CAM/DISP1, by default the driver is using cam1 interface.

Connect the FPC on the RPI5, note that the contact should facing the Ethernet connector: