v5

v5

v4

Update README.md

v3

Changes from V0.2 to V3

• new TopPlate, with longer Battery-strap slots - backwards compatible to V0.2
• new BatteryPad, cause of the repositioning and longer Battery-strap slots - NOT backwards compatible to V0.2
• new Cam-plate design, with Angel holes and a forward position, the Plate also contacts the 4 front Spacers for more rigidy in the front part - backwards compatible to V0.2
• Main-plate is now on top for more building room, a 20x20 (M2) mounting pattern added in the front, Antenna Zip-tie holes added - NOT backwards compatible to V.22
• 5inch Arms got a reinforcement on the outer mounting hole (backwards compatible to V.01 and V0.2)
• new Bottom-plate - NOT backwards compatible to V0.2
• changed our versioning because its sounds better (we went from v0.2 straight to v3)

that's all changes on the Carbon and the BatteryPad. For the guys that want to mount the Battery on the bottom, i made a small 3D-batterystrap mount, that also gives the battery a flat mounting option, cause of the swap of the Center and Bottom plate. All other 3D-Printed parts will fit the Version 0.3.

0.2

Changes from 0.11 to 0.2

• top plate: new design pattern
• top plate: wider battery strap slots
• top plate: removed indentation near the second spacer row
• top plate: ziptie holes for RX Antennas
• center plate: ziptie holes for securing battery cable
• cam plate: new design
• added slots for MicroCam metal brackets
• bottom plate: micro cam bracket mounting slots
• bottom plate: 20x20 VTX stack holes
• 20x20 FC support
• arms: better motor protection
• arms: added 6 inch arms
• bottom battery mount slots for 20mm straps
• Impulse RC Wolf PDB support
• added silicone/foam battery pads (top & bottom)

compatibility

We changed the camera plate. Therefore topplate and bottomplate are not compatible with v0.11. Amrs and centerplate is compatible with v0.11

0.11

Changes from 0.1 to 0.11

• Center Plate: Added press insert nuts
• Center Plate: removed slots
• Center Plate: thickness now 3mm
• 5" Arms: 3mm longer
• Camera Plates/ Top & Bottom-Plate: 2mm Camera plates
• we parameterized the frame in Fusion360. So please get a free account at https://www.autodesk.com/products/fusion-360/overview and join our FusionTeam with your email adress in the Discord Channel #cad-software. We will add you soon!

Center plate got insert nuts, so we made it 3mm thick. Please check the .dxf for all dimensions for the insert nut holes.

We also increased the lenght of the 5" arms by 3mm because there is a a race version of the frame in development, so we can still use the 5" arms for a pod-style-true-x racer.

v0.1 - initial Release

Update README.md