Add support for crowpanel 2.8inch display

CYD-Klipper/boards/esp32-CROWPANEL-28R.json

@@ -0,0 +1,63 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "-DUSER_SETUP_LOADED=1",
+        "-DILI9341_2_DRIVER=1",
+        "-DTFT_BACKLIGHT_ON=HIGH",
+        "-DTFT_BL=27",
+        "-DTFT_MISO=12",
+        "-DTFT_MOSI=13",
+        "-DTFT_SCLK=14",
+        "-DTFT_CS=15",
+        "-DTFT_DC=2",
+        "-DTFT_RST=-1",
+        "-DLOAD_GCLD=1",
+        "-DSPI_FREQUENCY=15999999",
+        "-DSPI_READ_FREQUENCY=20000000",
+        "-DSPI_TOUCH_FREQUENCY=600000",
+        "-DTOUCH_CS=33",
+
+        "-DCYD_SCREEN_HEIGHT_PX=240",
+        "-DCYD_SCREEN_WIDTH_PX=320",
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_CROWPANEL_28R=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-crowpanel-28R",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005004502250619.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/platformio.ini

@@ -84,3 +84,13 @@ board = esp32-4827S043C-smartdisplay
 [env:esp32-8048S043C-SD]
 board = esp32-8048S043C-smartdisplay
 
+[env:esp32-CROWPANEL-28R]
+platform = https://github.com/platformio/platform-espressif32#v6.9.0
+board = esp32-CROWPANEL-28R
+lib_deps = 
+	SPI
+	https://github.com/suchmememanyskill/lvgl
+	https://github.com/Bodmer/TFT_eSPI.git
+	bblanchon/ArduinoJson@^7.0.0
+	plageoj/UrlEncode@^1.0.1
+	erriez/ErriezCRC32 @ ^1.0.1

CYD-Klipper/src/core/device/ESP32-CROWPANEL_28R.cpp

@@ -0,0 +1,111 @@
+#ifdef CYD_SCREEN_DRIVER_ESP32_CROWPANEL_28R
+#include "../screen_driver.h"
+
+#ifdef CYD_SCREEN_VERTICAL
+    #error "Vertical screen not supported with the ESP32_CROWPANEL_28R driver"
+#endif
+
+#include <SPI.h>
+#include <TFT_eSPI.h>
+#include "../../conf/global_config.h"
+#include "lvgl.h"
+#include <TFT_eSPI.h>
+#include "../lv_setup.h"
+
+#define CPU_FREQ_HIGH 240
+#define CPU_FREQ_LOW 80
+#define TOUCH_THRESHOLD 600
+
+static lv_disp_draw_buf_t draw_buf;
+static lv_color_t buf[CYD_SCREEN_HEIGHT_PX * CYD_SCREEN_WIDTH_PX / 10];
+
+TFT_eSPI tft = TFT_eSPI();
+
+uint16_t touchX, touchY;
+
+void screen_setBrightness(byte brightness)
+{
+    // calculate duty, 4095 from 2 ^ 12 - 1
+    uint32_t duty = (4095 / 255) * brightness;
+
+    // write duty to LEDC
+    ledcWrite(0, duty);
+}
+
+void screen_lv_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
+{
+    uint32_t w = (area->x2 - area->x1 + 1);
+    uint32_t h = (area->y2 - area->y1 + 1);
+
+    tft.startWrite();
+    tft.setAddrWindow(area->x1, area->y1, w, h);
+    tft.pushColors((uint16_t *)&color_p->full, w * h, true);
+    tft.endWrite();
+
+    lv_disp_flush_ready(disp);
+}
+
+void screen_lv_touchRead(lv_indev_drv_t *indev_driver, lv_indev_data_t *data)
+{
+    if (tft.getTouch( &touchX, &touchY, TOUCH_THRESHOLD))
+    {
+        data->state = LV_INDEV_STATE_PR;
+        data->point.x = touchX;
+        data->point.y = touchY;
+    }
+    else
+    {
+        data->state = LV_INDEV_STATE_REL;
+    }
+}
+
+void set_invert_display(){
+    tft.invertDisplay(get_current_printer_config()->invert_colors);
+}
+
+void screen_setup()
+{
+    uint16_t calData[5] = { 189, 3416, 359, 3439, 1};
+
+    lv_init();
+
+    tft.init();
+    tft.fillScreen(TFT_BLACK);
+    tft.invertDisplay(false);
+    delay(300);
+
+    tft.setRotation(1);
+    tft.setTouch( calData );
+
+    if (global_config.display_mode) {
+        // <3 https://github.com/witnessmenow/ESP32-Cheap-Yellow-Display/blob/main/cyd.md#the-display-doesnt-look-as-good
+        tft.writecommand(ILI9341_GAMMASET); //Gamma curve selected
+        tft.writedata(2);
+        delay(120);
+        tft.writecommand(ILI9341_GAMMASET); //Gamma curve selected
+        tft.writedata(1);
+    }
+
+    ledcSetup(0, 5000, 12);
+    ledcAttachPin(TFT_BL, 0);
+
+    lv_disp_draw_buf_init(&draw_buf, buf, NULL, CYD_SCREEN_HEIGHT_PX * CYD_SCREEN_WIDTH_PX / 10);
+
+    /*Initialize the display*/
+    static lv_disp_drv_t disp_drv;
+    lv_disp_drv_init(&disp_drv);
+    disp_drv.hor_res = CYD_SCREEN_WIDTH_PX;
+    disp_drv.ver_res = CYD_SCREEN_HEIGHT_PX;
+    disp_drv.flush_cb = screen_lv_flush;
+    disp_drv.draw_buf = &draw_buf;
+    lv_disp_drv_register(&disp_drv);
+
+    /*Initialize the (dummy) input device driver*/
+    static lv_indev_drv_t indev_drv;
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.read_cb = screen_lv_touchRead;
+    lv_indev_drv_register(&indev_drv);
+}
+
+#endif // CYD_SCREEN_DRIVER_ESP32_CROWPANEL_28R