Skip to content

cosmwasm: add wormchain ibc receiver rust tests #14

cosmwasm: add wormchain ibc receiver rust tests

cosmwasm: add wormchain ibc receiver rust tests #14

Workflow file for this run

name: Build
on:
workflow_dispatch:
pull_request:
push:
branches:
- main
jobs:
# Run the full Tilt build and wait for it to converge
tilt:
# in the future, we may want to run cheap lints, tests, and builds before firing up the expensive tilt test.
# But for now, we'll kick-off everything at once
# needs: [go-lint-and-tests, node, algorand, ethereum, terra, rust-lint-and-tests]
runs-on: tilt-kube-public
# Cancel previous builds on the same branch/ref. Full runs are expensive
# and capacity is limited, so we want to avoid running multiple builds
# in parallel even if it means skipping CI runs on permanent branches
# (unfortunately, we can't differentiate between temporary and permanent
# refs without duplicating the entire logic).
concurrency:
group: ${{ github.workflow }}-tilt-${{ github.ref }}
cancel-in-progress: true
steps:
- name: Clear repository
run: |
rm -rf $GITHUB_WORKSPACE && mkdir $GITHUB_WORKSPACE
- uses: actions/checkout@v2
- name: Expand for link to Tilt dashboard (only available during build)
run: >
echo "Tilt progress dashboard: https://$DASHBOARD_URL"
- run: |
kubectl config set-context ci --namespace=$DEPLOY_NS
kubectl config use-context ci
- run: tilt ci --timeout 45m0s -- --ci --namespace=$DEPLOY_NS --num=2
timeout-minutes: 60
# Clean up k8s resources
- run: kubectl delete --namespace=$DEPLOY_NS service,statefulset,configmap,pod,job --all
if: always()
# Verify whether the Makefile builds the node (no dependencies other than Go)
node:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-go@v2
with:
go-version: "1.21.9"
- run: make node
algorand:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v3
- uses: actions/setup-python@v3
with:
python-version: "3.10"
- run: pip install -r algorand/requirements.txt
- run: cd algorand && make test
ethereum:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "16"
- name: Install Foundry
uses: foundry-rs/foundry-toolchain@v1
- run: cd ethereum && make test-push0 && make test
relayer-ethereum:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "16"
- name: Install Foundry
uses: foundry-rs/foundry-toolchain@v1
- run: cd relayer/ethereum && make test-push0 && make test
ethereum-upgrade:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "16"
- name: Install Foundry
uses: foundry-rs/foundry-toolchain@v1
- run: cd clients/js && make install
- run: cd ethereum && make test-upgrade
solana:
runs-on: ubuntu-20.04
container: ghcr.io/wormhole-foundation/solana:1.10.31@sha256:d31e8db926a1d3fbaa9d9211d9979023692614b7b64912651aba0383e8c01bad
env:
RUSTFLAGS: -Dwarnings
EMITTER_ADDRESS: CiByUvEcx7w2HA4VHcPCBUAFQ73Won9kB36zW9VjirSr
BRIDGE_ADDRESS: Bridge1p5gheXUvJ6jGWGeCsgPKgnE3YgdGKRVCMY9o
steps:
- uses: actions/checkout@v3
- name: Get rust toolchain version
id: toolchain
run: |
RUST_VERSION="$(awk '/channel =/ { print substr($3, 2, length($3)-2) }' solana/rust-toolchain)"
echo "::set-output name=version::${RUST_VERSION}"
- name: Get solana version
id: solana
run: |
SOLANA_VERSION="$(awk '/solana-program =/ { print substr($3, 3, length($3)-3) }' solana/bridge/program/Cargo.toml)"
echo "::set-output name=version::${SOLANA_VERSION}"
- name: Cache rust toolchain
uses: actions/cache@v3
env:
cache-name: solana-toolchain
with:
path: |
~/.cargo/bin
~/.rustup
key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ steps.toolchain.outputs.version }}
restore-keys: |
${{ runner.os }}-build-${{ env.cache-name }}-
${{ runner.os }}-build-
${{ runner.os }}-
- name: Install rust toolchain
uses: dtolnay/rust-toolchain@55c7845fad90d0ae8b2e83715cb900e5e861e8cb
with:
toolchain: ${{ steps.toolchain.outputs.version }}
components: "clippy,rustfmt"
- name: Cache rust packages / build cache
uses: actions/cache@v3
env:
cache-name: solana-rust-packages
with:
path: |
~/.cargo/bin
~/.cargo/registry
~/.cargo/git/db
solana/target
key: ${{ runner.os }}-build-${{ env.cache-name }}-${{ hashFiles('solana/Cargo.lock') }}
restore-keys: |
${{ runner.os }}-build-${{ env.cache-name }}-
${{ runner.os }}-build-
${{ runner.os }}-
- name: Run `cargo fmt`
run: cargo fmt --check --all --manifest-path solana/Cargo.toml
- name: Run `cargo check`
run: cargo check --workspace --tests --manifest-path solana/Cargo.toml
--features "nft-bridge/instructions token-bridge/instructions wormhole-bridge-solana/instructions"
- name: Run `cargo clippy`
run: cargo clippy --workspace --tests --manifest-path solana/Cargo.toml
--features "nft-bridge/instructions token-bridge/instructions wormhole-bridge-solana/instructions"
- name: Run unit tests
env:
RUST_BACKTRACE: "1"
run: |
cd solana
export BPF_OUT_DIR="$(pwd)/target/deploy"
export PATH="${HOME}/.local/share/solana/install/active_release/bin:${PATH}"
mkdir -p "${BPF_OUT_DIR}"
cp external/mpl_token_metadata.so "${BPF_OUT_DIR}"
BPF_PACKAGES=(
bridge/program/Cargo.toml
modules/token_bridge/program/Cargo.toml
modules/nft_bridge/program/Cargo.toml
)
for p in "${BPF_PACKAGES[@]}"; do
cargo build-bpf --manifest-path "${p}"
done
cargo test --workspace --features "nft-bridge/instructions token-bridge/instructions wormhole-bridge-solana/instructions"
shell:
bash
aptos:
name: Aptos
runs-on: ubuntu-20.04
defaults:
run:
shell: bash
working-directory: ./aptos
steps:
- name: Checkout repository
uses: actions/checkout@v2
- name: Run tests via docker
run: make test-docker
sui:
name: Sui
runs-on: ubuntu-20.04
steps:
- name: Checkout repository
uses: actions/checkout@v2
- name: Run tests via docker
run: cd sui && make test-docker
terra:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "16"
- run: cd terra && make test
terra-2:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "16"
- run: cd cosmwasm/deployment/terra2 && make test
cosmwasm:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "16"
- run: cd cosmwasm && make test
cli:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-node@v2
with:
node-version: "20"
- run: |
cd clients/js && make test
make docs
git diff --name-only --exit-code && echo "✅ Generated CLI docs match committed docs" || (echo "❌ Generated CLI docs differs from committed CLI docs, run \`make docs\` and commit the result" >&2 && exit 1)
# Verify wormhole chain unit tests
wormchain:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-go@v2
with:
go-version: "1.19.9"
- run: |
cd wormchain
make proto -B
git diff --name-only --exit-code && echo "✅ Generated proto matches committed proto" || (echo "❌ Generated proto differs from committed proto, run \`make proto -B\` and commit the result" >&2 && exit 1)
make test
# Verify go sdk unit/fuzz tests
sdk_vaa:
runs-on: ubuntu-20.04
steps:
- uses: actions/checkout@v2
- uses: actions/setup-go@v2
with:
go-version: "1.21.9"
- run: cd sdk/vaa && go test && go test -v -fuzz FuzzCalculateQuorum -run FuzzCalculateQuorum -fuzztime 15s
# Run Go linters
node-lint:
# The linter is slow enough that we want to run it on the self-hosted runner
runs-on: tilt-kube-public
concurrency:
group: ${{ github.workflow }}-lint-${{ github.ref }}
cancel-in-progress: true
steps:
- name: Clear repository
run: |
rm -rf $GITHUB_WORKSPACE && mkdir $GITHUB_WORKSPACE
- uses: actions/checkout@v2
- uses: actions/setup-go@v2
with:
go-version: "1.21.9"
- name: Install formatter
run: go install golang.org/x/tools/cmd/[email protected]
- name: Formatting checks
run: ./scripts/lint.sh -l -g format
- name: Install linters
run: curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s -- -b $(go env GOPATH)/bin v1.57.2
- name: Run linters
run: make generate && golangci-lint --version && ./scripts/lint.sh -g lint
- name: Ensure generated proto matches
run: |
rm -rf node/pkg/proto
docker build --target go-export -f Dockerfile.proto -o type=local,dest=node .
git diff --name-only --exit-code && echo "✅ Generated proto matches committed proto" || (echo "❌ Generated proto differs from committed proto, run \`rm -rf node/pkg/proto && docker build --target go-export -f Dockerfile.proto -o type=local,dest=node .\` and commit the result" >&2 && exit 1)
spellcheck:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v4
# Pinned version of the v6 tag, which is a lightweight and hence mutable tag
- uses: streetsidesoftware/cspell-action@214db1e3138f326d33b7a6a51c92852e89ab0618
with:
# For now, only lint markdown files
files: "**/*.md"
inline: warning
# Only check files in the PR or push
incremental_files_only: true
# Run Go tests
node-tests:
# The tests are slow enough that we want to run it on the self-hosted runner
runs-on: tilt-kube-public
concurrency:
group: ${{ github.workflow }}-test-${{ github.ref }}
cancel-in-progress: true
steps:
- name: Clear repository
run: |
rm -rf $GITHUB_WORKSPACE && mkdir $GITHUB_WORKSPACE
- uses: actions/checkout@v2
- uses: actions/setup-go@v2
with:
go-version: "1.21.9"
# The go-ethereum and celo-blockchain packages both implement secp256k1 using the exact same header, but that causes duplicate symbols.
- name: Run golang tests
run: cd node && go test -v -timeout 5m -race -ldflags '-extldflags "-Wl,--allow-multiple-definition" ' ./...
# Run Rust lints and tests
rust-lint-and-tests:
runs-on: ubuntu-20.04
env:
RUSTFLAGS: -Dwarnings
strategy:
matrix:
manifest:
- path: cosmwasm/Cargo.toml
args: "--workspace --locked"
- path: terra/Cargo.toml
args: "--workspace --locked"
- path: sdk/rust/Cargo.toml
args: "--all-features --all-targets"
name: rust-lint-and-tests (${{ matrix.manifest.path }})
steps:
- name: Check out source
uses: actions/checkout@v3
- name: Install rust toolchain
uses: dtolnay/rust-toolchain@55c7845fad90d0ae8b2e83715cb900e5e861e8cb
with:
toolchain: stable
components: "clippy,rustfmt"
- name: Create cache key
id: cachekey
env:
MANIFEST: ${{ matrix.manifest.path }}
run: |
LOCKFILE="$(dirname "${MANIFEST}")/Cargo.lock"
NAME="${MANIFEST%%/*}"
HASH="$(sha256sum "${LOCKFILE}" | awk '{ print $1 }')"
echo "::set-output name=name::${NAME}"
echo "::set-output name=hash::${HASH}"
- name: Cache rust packages
uses: actions/cache@v3
with:
path: ~/.cargo/registry
key: ${{ runner.os }}-build-${{ steps.cachekey.outputs.name }}-${{ steps.cachekey.outputs.hash }}
restore-keys: |
${{ runner.os }}-build-${{ matrix.manifest.path }}-
- name: Run `rustfmt`
run: cd $(dirname ${{ matrix.manifest.path }}) && cargo fmt --check
- name: Run `cargo clippy`
run: cargo clippy ${{ matrix.manifest.args }} --tests --manifest-path ${{ matrix.manifest.path }}
- name: Run unit tests
run: cargo test ${{ matrix.manifest.args }} --manifest-path ${{ matrix.manifest.path }}
docker:
runs-on: ubuntu-latest
steps:
- name: Check out source
uses: actions/checkout@v2
- run: chmod 755 ./scripts/check-docker-pin.sh
- run: ./scripts/check-docker-pin.sh
npm-packages:
runs-on: ubuntu-latest
steps:
- name: Check out source
uses: actions/checkout@v2
- run: chmod 755 ./scripts/check-npm-package-scopes.sh
- run: ./scripts/check-npm-package-scopes.sh
prettier:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
- uses: actions/setup-node@v3
with:
node-version: 16
- run: npx [email protected] --check ./clients/js/src ./sdk/js/src