changes to ts-wallet-sdk docs

docs/building-apps/wallet/component/kt/configClient.mdx

@@ -0,0 +1,56 @@
+import { CodeExample } from "@site/src/components/CodeExample";
+
+### Configuring the Client
+
+The Kotlin wallet SDK uses the [ktor client](https://ktor.io/docs/getting-started-ktor-client.html) for all network requests (excluding Horizon, where the Stellar SDK's HTTP client is used). Currently, the okhttp engine is configured to be used with the client. You can read more about how to configure the ktor client [here](https://ktor.io/docs/create-client.html#configure-client).
+
+For example, the client can be globally configured:
+
+<CodeExample>
+
+```kotlin
+val walletCustomClient =
+  Wallet(
+    StellarConfiguration.Testnet,
+    ApplicationConfiguration(
+      defaultClientConfig = {
+        engine { this.config { this.connectTimeout(Duration.ofSeconds(10)) } }
+        install(HttpRequestRetry) {
+          retryOnServerErrors(maxRetries = 5)
+          exponentialDelay()
+        }
+      }
+    )
+  )
+```
+
+</CodeExample>
+
+This Kotlin code will set the connect timeout to ten seconds via the [okhttp configuration](https://ktor.io/docs/http-client-engines.html#okhttp) and also installs the [retry plugin](https://ktor.io/docs/client-retry.html). You can also specify client configuration for specific wallet SDK classes.
+
+For example, to change connect timeout when connecting to some anchor server:
+
+<CodeExample>
+
+```kotlin
+val anchorCustomClient =
+  walletCustomClient.anchor("example.com") {
+    engine { this.config { this.connectTimeout(Duration.ofSeconds(30)) } }
+  }
+```
+
+</CodeExample>
+
+### Closing Resources
+
+After the wallet class is no longer used, it's necessary to close all clients used by it. While in some applications it may not be required (e.g. the wallet lives for the whole lifetime of the application), in other cases it can be required. If your wallet class is short-lived, it's recommended to close client resources using a close function:
+
+<CodeExample>
+
+```kotlin
+fun closeWallet() {
+  wallet.close()
+}
+```
+
+</CodeExample>

docs/building-apps/wallet/component/kt/httpConfig.mdx

@@ -0,0 +1,14 @@
+import { CodeExample } from "@site/src/components/CodeExample";
+
+There is one more available configuration for a wallet that allows it to configure internal logic of the SDK. For example, to test with local servers on an HTTP protocol, HTTP can be manually enabled.
+
+<CodeExample>
+
+```kotlin
+val walletCustom = Wallet(
+  StellarConfiguration.Testnet,
+  ApplicationConfiguration { defaultRequest { url { protocol = URLProtocol.HTTP } } }
+)
+```
+
+</CodeExample>

docs/building-apps/wallet/component/kt/watcher.mdx

@@ -0,0 +1,31 @@
+import { CodeExample } from "@site/src/components/CodeExample";
+
+Next, let's get the channel provided by `WatcherResult` to receive events.
+
+<CodeExample>
+
+```kt
+do {
+  val event = result.channel.receive()
+  when (event) {
+    is StatusChange ->
+      println("Status changed to ${event.status}. Transaction: ${event.transaction}")
+    is ExceptionHandlerExit -> println("Exception handler exited the job")
+    is ChannelClosed -> println("Channel closed. Job is done")
+  }
+} while (event !is ChannelClosed)
+```
+
+</CodeExample>
+
+This code example will consume all events coming from the channel until it's closed. There are three types of events:
+
+- `StatusChange`: indicates that transaction status has changed.
+- `ExceptionHandlerExit`: indicates that the exception handler exited the processing loop. With default retry handler it happens when retries are exhausted.
+- `ChannelClosed`: indicates that the channel is closed and no more events will be emitted. This event will always fire. If `ExceptionHandlerExit` happened, channel will close right after. Otherwise, (under normal circumstances) it will stop when all transactions reach terminal statuses.
+
+:::info
+
+Events are stored in the channel until they are received, and calling the `receive()` method will block the channel until a message is received. You can read more about how channels work in the [channel documentation](https://kotlinlang.org/docs/coroutines-and-channels.html#channels).
+
+:::

docs/building-apps/wallet/component/ts/configClient.mdx

@@ -0,0 +1,24 @@
+import { CodeExample } from "@site/src/components/CodeExample";
+
+### Configuring the Client
+
+The Typescript wallet SDK uses the [axios client](https://axios-http.com/docs/intro) for all network requests. You can read more about how to configure the axios client [here](https://axios-http.com/docs/instance).
+
+For example, we can configure our axios client to be globally configured with a timeout:
+
+<CodeExample>
+
+```typescript
+const customClient: AxiosInstance = axios.create({
+  timeout: 1000,
+});
+let appConfig = new ApplicationConfiguration(DefaultSigner, customClient);
+let wal = new Wallet({
+  stellarConfiguration: StellarConfiguration.TestNet(),
+  applicationConfiguration: appConfig,
+});
+```
+
+</CodeExample>
+
+You can find more [configure options here.](https://axios-http.com/docs/req_config)

docs/building-apps/wallet/intro.mdx

@@ -8,8 +8,11 @@ import { WalletCodeExample as CodeExample } from "@site/src/components/WalletCod
 import Header from "./component/header.mdx";
 import KtInstall from "./component/kt/install.mdx";
 import TsInstall from "./component/ts/install.mdx";
+import KtHttpConfig from "./component/kt/httpConfig.mdx";
+import KtConfigClient from "./component/kt/configClient.mdx";
+import TsConfigClient from "./component/ts/configClient.mdx";
 
-<Header WIPLangs={["ts", "dart"]} />
+<Header WIPLangs={["dart"]} />
 
 ## Installation
 
@@ -53,99 +56,9 @@ let wallet = new Wallet({
 
 </CodeExample>
 
-There is one more available configuration for a wallet that allows it to configure internal logic of the SDK. For example, to test with local servers on an HTTP protocol, HTTP can be manually enabled.
+<LanguageSpecific kt={<KtHttpConfig />} />
 
-<CodeExample>
-
-```kotlin
-val walletCustom = Wallet(
-  StellarConfiguration.Testnet,
-  ApplicationConfiguration { defaultRequest { url { protocol = URLProtocol.HTTP } } }
-)
-```
-
-</CodeExample>
-
-### Configuring the Client
-
-The Kotlin wallet SDK uses the [ktor client](https://ktor.io/docs/getting-started-ktor-client.html) for all network requests (excluding Horizon, where the Stellar SDK's HTTP client is used). Currently, the okhttp engine is configured to be used with the client. You can read more about how to configure the ktor client [here](https://ktor.io/docs/create-client.html#configure-client).
-
-The Typescript wallet SDK uses the [axios client](https://axios-http.com/docs/intro) for all network requests. You can read more about how to configure the axios client [here](https://axios-http.com/docs/instance).
-
-For example, the client can be globally configured:
-
-<CodeExample>
-
-```kotlin
-val walletCustomClient =
-  Wallet(
-    StellarConfiguration.Testnet,
-    ApplicationConfiguration(
-      defaultClientConfig = {
-        engine { this.config { this.connectTimeout(Duration.ofSeconds(10)) } }
-        install(HttpRequestRetry) {
-          retryOnServerErrors(maxRetries = 5)
-          exponentialDelay()
-        }
-      }
-    )
-  )
-```
-
-```typescript
-const customClient: AxiosInstance = axios.create({
-  timeout: 1000,
-});
-let appConfig = new ApplicationConfiguration(DefaultSigner, customClient);
-let wal = new Wallet({
-  stellarConfiguration: StellarConfiguration.TestNet(),
-  applicationConfiguration: appConfig,
-});
-```
-
-</CodeExample>
-
-This Kotlin code will set the connect timeout to ten seconds via the [okhttp configuration](https://ktor.io/docs/http-client-engines.html#okhttp) and also installs the [retry plugin](https://ktor.io/docs/client-retry.html). You can also specify client configuration for specific wallet SDK classes.
-
-In Typescript, we can use axios to [configure](https://axios-http.com/docs/req_config) the timeout in milliseconds.
-
-For example, to change connect timeout when connecting to some anchor server:
-
-<CodeExample>
-
-```kotlin
-val anchorCustomClient =
-  walletCustomClient.anchor("example.com") {
-    engine { this.config { this.connectTimeout(Duration.ofSeconds(30)) } }
-  }
-```
-
-```typescript
-const customClient: AxiosInstance = axios.create({
-  timeout: 10000,
-});
-let appConfig = new ApplicationConfiguration(DefaultSigner, customClient);
-let wal = new Wallet({
-  stellarConfiguration: StellarConfiguration.TestNet(),
-  applicationConfiguration: appConfig,
-});
-```
-
-</CodeExample>
-
-### Closing Resources
-
-After the wallet class is no longer used, it's necessary to close all clients used by it. While in some applications it may not be required (e.g. the wallet lives for the whole lifetime of the application), in other cases it can be required. If your wallet class is short-lived, it's recommended to close client resources using a close function:
-
-<CodeExample>
-
-```kotlin
-fun closeWallet() {
-  wallet.close()
-}
-```
-
-</CodeExample>
+<LanguageSpecific kt={<KtConfigClient />} ts={<TsConfigClient />} />
 
 ## Stellar Basics
 
@@ -159,6 +72,10 @@ To interact with the Horizon instance configured in the previous steps, simply d
 val stellar = wallet.stellar()
 ```
 
+```typescript
+const stellar = wallet.stellar();
+```
+
 </CodeExample>
 
 This example will create a Stellar class that manages the connection to Horizon service.
@@ -198,7 +115,7 @@ suspend fun anchorToml(): TomlInfo {
 ```
 
 ```typescript
-let resp = await anchor.getInfo();
+let resp = await anchor.sep1();
 ```
 
 </CodeExample>

docs/building-apps/wallet/sep10.mdx

@@ -61,7 +61,7 @@ suspend fun getAuthToken(): AuthToken {
 let authKey = Keypair.fromSecret("my secret key");
 
 const getAuthToken = async (): Promise<AuthToken> => {
-  return anchor.auth().authenticate({ authKey });
+  return anchor.sep10().authenticate({ authKey });
 };
 ```
 
@@ -122,7 +122,7 @@ const demoWalletSigner: WalletSigner = {
 };
 
 const getAuthToken = async () => {
-  return anchor.auth().authenticate({
+  return anchor.sep10().authenticate({
     accountKp,
     walletSigner: demoWalletSigner,
     clientDomain: "https://demo-wallet-server.stellar.org/sign",