2023.05.16
Changes
tch-gui-unhide
- Added cron task to update kernel time zone when daylight saving changes so that Time of Day processing will be run on correct schedule (#146)
- Added separate tabs to Local Network for global configuration and static leases
- Added LAN port assignment to Local Network interface configuration
- Added VLAN tab to Local Network (not FW 20.4/21.4)
- Added ability to add and remove additional LAN interfaces
- Added ability to add/remove/edit firewall zones and zone forwarding rules
- Added ability to configure mobile operator and roaming
- Added some operational mobile operators if not already defined
- Added missing mmpbxmobilenet commit/apply action (FW 17.2)
- Added associated mobile device and session settings to VoLTE tab
- Added ability to get the IP address from DHCP when switching to bridged mode (for use on LAN bridges only!)
- Added LAN interfaces up/down lights and display LAN interface type (Bridge vs Single Port)
- Added support for FW 21.4
- Fixed bug that caused the Eco Settings card to fail to display and threw an error when the device did not support Ethernet Deep Green Mode (#149)
- Fixed mobile device capabilities not showing on FW 17.2
- Fixed detection of in-use mobile operator
- Fixed wireless radio in device description on Egress QoS on FW 20.4/21.4
- Fixed failed address validation on IPv6 port forwarding when MAC has multiple IPv6 addresses
- Fixed Ethernet connection status on Broadband screen (#148)
- Fixed minor display issue on Mobile card, and removed check for mobile devices before displaying
- Fixed Time of Day Wireless Control on FW 20.4/21.4 to allow selection of SSID to allow/blocking
- Show wait spinner when changing tabs and adding table rows on slow screens
- Do not show VoLTE call stats if Telephony disabled
- Removed VoLTE tab if no VoLTE configuration support
- General code and consistency improvements to all Time of Day tabs
- Removed band steering status from Wi-Fi card
- When Permanent WWAN enabled, show upload/download stats separately for WAN and WWAN on Broadband card
- Bridged mode removed Guest network interfaces without removing Guest Wi-Fi SSIDs (now does not remove Guest networks)
- Abort installation if cannot determine required environment
- Debugging no longer enabled by default in pre-releases
tch-gui-unhide-xtra.adblock
- Updated to support Adblock 4.1.5
de-telstra:
- Fixed various issues on devices with FW 17.2 or without 4G Backup
- Abort if cannot determine required environment
- No longer automatically enables VoLTE (replaced by GUI configuration)
hijack-dns
- Fixed some issues with --status output
move-lan-port-to-own-network
- Modified to correctly configure the port switch and now uses VLANs to resolve issues where clients would fail to acquire an address via DHCP
- Prevent running when mdkshell not present (e.g. FW 20.4/21.4)
reset-to-factory-defaults-with-root
- Copy mtd executable to /tmp and use that to write/verify firmware (to prevent "Segmentation fault" errors)
- Allow restore between 20.4 and later firmware
safe-firmware-upgrade
- Copy mtd executable to /tmp and use that to write/verify firmware (to prevent "Segmentation fault" errors)
- Allow restore between 20.4 and later firmware
set-optimal-bank-plan
- Now supports recommended configuration on SMG3 (booting from bank 2 + exploitable firmware kept in bank 1)
show-bank-plan
- Changed messages when running on SMG3
update-ca-certificates
- Auto-detect latest OpenWrt release to get latest version of ca-certificates and ca-bundle, and only download packages if they have been updated