GitHub - sensics/IR-Board-Programmer: Scripted programmer tool for STM8-based IR driver board

sensics / IR-Board-Programmer Public

Notifications You must be signed in to change notification settings
Fork 3
Star 4

Scripted programmer tool for STM8-based IR driver board

Notifications

Name		Name	Last commit message	Last commit date
Latest commit History 3 Commits
srecord-1.64-win32		srecord-1.64-win32
stm8flash		stm8flash
.gitignore		.gitignore
Config.txt		Config.txt
Program-IRFirmware.cmd		Program-IRFirmware.cmd
Program-LedHex.cmd		Program-LedHex.cmd
Program-LedHex.ps1		Program-LedHex.ps1
README.txt		README.txt
ir_led_driver_production.hex		ir_led_driver_production.hex
mask.txt		mask.txt
package.ps1		package.ps1

Repository files navigation

Single-step STM8 flash tool for the HDK IR LED driver board.

Connect your ST-Link v2 compatible USB device to the programming header and to USB (installing the drivers if needed),
and double-click "Program-IRFirmware.cmd" to automatically program the contents of the "ir_led_driver_production.hex"
file (both program flash and eeprom) to the STM8S003K3 on the IR driver board. The other .txt files in this directory
should contain metadata about that firmware image's configuration.

Driven by a powershell script by Ryan Pavlik (that takes in a single HEX file, splits it into program and EEPROM hexes
using srecord/scat, then calls the STM8FLASH command line tool to write the program and eeprom data over an ST-Link V2 USB device),
as well as srecord 1.64 binaries (downloaded from http://sourceforge.net/projects/srecord/files/srecord-win32/1.64/),
and binaries and sources for the STM8FLASH tool (open source - GPL licensed - https://github.com/vdudouyt/stm8flash ).

All you need besides this is to install the ST-Link V2 drivers.