Switch default branch from master to main (#361)

CONTRIBUTING.rst

@@ -166,16 +166,16 @@ Release Workflow
 The process of releasing a new version involves several steps combining both ``git`` and
 ``bumpversion`` which, briefly:
 
-1. Merge what is in ``master`` branch into ``stable`` branch.
+1. Merge what is in ``main`` branch into ``stable`` branch.
 2. Update the version in ``setup.cfg``, ``copulas/__init__.py`` and ``HISTORY.md`` files.
 3. Create a new TAG pointing at the correspoding commit in ``stable`` branch.
-4. Merge the new commit from ``stable`` into ``master``.
+4. Merge the new commit from ``stable`` into ``main``.
 5. Update the version in ``setup.cfg`` and ``copulas/__init__.py`` to open the next
    development interation.
 
 **Note:** Before starting the process, make sure that ``HISTORY.md`` has a section titled
 **Unreleased** with the list of changes that will be included in the new version, and that
-these changes are committed and available in ``master`` branch.
+these changes are committed and available in ``main`` branch.
 Normally this is just a list of the Pull Requests that have been merged since the latest version.
 
 Once this is done, run of the following commands:

INSTALL.md

@@ -47,12 +47,12 @@ make install
 
 If you intend to modify the source code or contribute to the project you will need to
 install it from the source using the `make install-develop` command. In this case, we
-recommend you to branch from `master` first:
+recommend you to branch from `main` first:
 
 ```bash
 git clone [email protected]:sdv-dev/Copulas
 cd Copulas
-git checkout master
+git checkout main
 git checkout -b <your-branch-name>
 make install-develp
 ```

Makefile

@@ -177,14 +177,14 @@ publish-test: dist publish-confirm ## package and upload a release on TestPyPI
 publish: dist publish-confirm ## package and upload a release
 	twine upload dist/*
 
-.PHONY: git-merge-master-stable
-git-merge-master-stable: ## Merge master into stable
+.PHONY: git-merge-main-stable
+git-merge-main-stable: ## Merge main into stable
 	git checkout stable || git checkout -b stable
-	git merge --no-ff master -m"make release-tag: Merge branch 'master' into stable"
+	git merge --no-ff main -m"make release-tag: Merge branch 'main' into stable"
 
-.PHONY: git-merge-stable-master
-git-merge-stable-master: ## Merge stable into master
-	git checkout master
+.PHONY: git-merge-stable-main
+git-merge-stable-main: ## Merge stable into main
+	git checkout main
 	git merge stable
 
 .PHONY: git-push
@@ -218,7 +218,7 @@ bumpversion-major: ## Bump the version the next major skipping the release
 .PHONY: bumpversion-revert
 bumpversion-revert: ## Undo a previous bumpversion-release
 	git tag --delete $(shell git tag --points-at HEAD)
-	git checkout master
+	git checkout main
 	git branch -D stable
 
 CLEAN_DIR := $(shell git status --short | grep -v ??)
@@ -232,10 +232,10 @@ ifneq ($(CLEAN_DIR),)
 	$(error There are uncommitted changes)
 endif
 
-.PHONY: check-master
-check-master: ## Check if we are in master branch
-ifneq ($(CURRENT_BRANCH),master)
-	$(error Please make the release from master branch\n)
+.PHONY: check-main
+check-main: ## Check if we are in main branch
+ifneq ($(CURRENT_BRANCH),main)
+	$(error Please make the release from main branch\n)
 endif
 
 .PHONY: check-candidate
@@ -251,18 +251,18 @@ ifeq ($(CHANGELOG_LINES),0)
 endif
 
 .PHONY: check-release
-check-release: check-clean check-candidate check-master check-history ## Check if the release can be made
+check-release: check-clean check-candidate check-main check-history ## Check if the release can be made
 	@echo "A new release can be made"
 
 .PHONY: release
-release: check-release git-merge-master-stable bumpversion-release git-push-tags-stable \
-	publish git-merge-stable-master bumpversion-patch git-push
+release: check-release git-merge-main-stable bumpversion-release git-push-tags-stable \
+	publish git-merge-stable-main bumpversion-patch git-push
 
 .PHONY: release-test
-release-test: check-release git-merge-master-stable bumpversion-release bumpversion-revert
+release-test: check-release git-merge-main-stable bumpversion-release bumpversion-revert
 
 .PHONY: release-candidate
-release-candidate: check-master publish bumpversion-candidate git-push
+release-candidate: check-main publish bumpversion-candidate git-push
 
 .PHONY: release-candidate-test
-release-candidate-test: check-clean check-master publish-test
+release-candidate-test: check-clean check-main publish-test

README.md

@@ -6,13 +6,13 @@
 [![PyPi Shield](https://img.shields.io/pypi/v/copulas.svg)](https://pypi.python.org/pypi/copulas)
 [![Downloads](https://pepy.tech/badge/copulas)](https://pepy.tech/project/copulas)
 [![Unit Tests](https://github.com/sdv-dev/Copulas/actions/workflows/unit.yml/badge.svg)](https://github.com/sdv-dev/Copulas/actions/workflows/unit.yml)
-[![Coverage Status](https://codecov.io/gh/sdv-dev/Copulas/branch/master/graph/badge.svg)](https://codecov.io/gh/sdv-dev/Copulas)
+[![Coverage Status](https://codecov.io/gh/sdv-dev/Copulas/branch/main/graph/badge.svg)](https://codecov.io/gh/sdv-dev/Copulas)
 [![Slack](https://img.shields.io/badge/Community-Slack-blue?style=plastic&logo=slack)](https://bit.ly/sdv-slack-invite)
 
 <br/>
 <p align="center" style="text-align:center">
 <a href="https://github.com/sdv-dev/Copulas">
-<img width=40% src="https://github.com/sdv-dev/SDV/blob/master/docs/images/Copulas-DataCebo.png?raw=true"></img>
+<img width=40% src="https://github.com/sdv-dev/SDV/blob/stable/docs/images/Copulas-DataCebo.png?raw=true"></img>
 </a>
 </p>
 
@@ -110,7 +110,7 @@ Thank you to our team of contributors who have built and maintained the library
 
 
 <div align="center">
-<a href="https://datacebo.com"><img align="center" width=40% src="https://github.com/sdv-dev/SDV/blob/master/docs/images/DataCebo.png"></img></a>
+<a href="https://datacebo.com"><img align="center" width=40% src="https://github.com/sdv-dev/SDV/blob/stable/docs/images/DataCebo.png"></img></a>
 </div>
 <br/>
 <br/>

RELEASE.md

@@ -36,7 +36,7 @@ Clone the project and install the development requirements before start the rele
 ```bash
 git clone https://github.com/sdv-dev/Copulas.git
 cd Copulas
-git checkout master
+git checkout main
 make install-develop
 ```
 
@@ -183,7 +183,7 @@ Clone the project and install the development requirements. Alternatively, with
 ```bash
 git clone https://github.com/sdv-dev/SDV
 cd SDV
-git checkout master
+git checkout main
 make install-develop
 ```
 

docs/conf.py

@@ -104,7 +104,7 @@
     'display_github': True,
     'github_user': user,
     'github_repo': project,
-    'github_version': 'master',
+    'github_version': 'main',
     'conf_py_path': '/docs/',
 }