Remove auto detection

Dockerfile

@@ -31,12 +31,28 @@ RUN set -x && \
     KEPT_PACKAGES+=(libglib2.0-0) && \
     TEMP_PACKAGES+=(libzmq3-dev) && \
     KEPT_PACKAGES+=(libzmq5) && \
+    TEMP_PACKAGES+=(libusb-1.0-0-dev) && \
+    KEPT_PACKAGES+=(libusb-1.0-0) && \
     # install packages
     apt-get update && \
     apt-get install -y --no-install-recommends \
     "${KEPT_PACKAGES[@]}" \
     "${TEMP_PACKAGES[@]}"\
     && \
+    # install sdrplay
+    curl --location --output /tmp/install_sdrplay.sh https://raw.githubusercontent.com/sdr-enthusiasts/install-libsdrplay/main/install_sdrplay.sh && \
+    chmod +x /tmp/install_sdrplay.sh && \
+    /tmp/install_sdrplay.sh && \
+    # deploy airspyone host
+    git clone https://github.com/airspy/airspyone_host.git /src/airspyone_host && \
+    pushd /src/airspyone_host && \
+    mkdir -p /src/airspyone_host/build && \
+    pushd /src/airspyone_host/build && \
+    cmake ../ -DINSTALL_UDEV_RULES=ON && \
+    make && \
+    make install && \
+    ldconfig && \
+    popd && popd && \
     # Deploy SoapySDR
     git clone https://github.com/pothosware/SoapySDR.git /src/SoapySDR && \
     pushd /src/SoapySDR && \
@@ -60,6 +76,40 @@ RUN set -x && \
     make install && \
     popd && popd && \
     ldconfig && \
+    # Deploy SoapyRTLSDR
+    git clone https://github.com/pothosware/SoapyRTLSDR.git /src/SoapyRTLSDR && \
+    pushd /src/SoapyRTLSDR && \
+    BRANCH_SOAPYRTLSDR=$(git tag --sort="creatordate" | tail -1) && \
+    git checkout "$BRANCH_SOAPYRTLSDR" && \
+    mkdir -p /src/SoapyRTLSDR/build && \
+    pushd /src/SoapyRTLSDR/build && \
+    cmake ../ -DCMAKE_BUILD_TYPE=Debug && \
+    make all && \
+    make install && \
+    popd && popd && \
+    ldconfig && \
+    # install sdrplay support for soapy
+    git clone https://github.com/pothosware/SoapySDRPlay.git /src/SoapySDRPlay && \
+    pushd /src/SoapySDRPlay && \
+    mkdir build && \
+    pushd build && \
+    cmake .. && \
+    make && \
+    make install && \
+    popd && \
+    popd && \
+    ldconfig && \
+    # Deploy Airspy
+    git clone https://github.com/pothosware/SoapyAirspy.git /src/SoapyAirspy && \
+    pushd /src/SoapyAirspy && \
+    mkdir build && \
+    pushd build && \
+    cmake .. && \
+    make    && \
+    make install   && \
+    popd && \
+    popd && \
+    ldconfig && \
     # Install dumpvdl2
     git clone https://github.com/szpajder/dumpvdl2.git /src/dumpvdl2 && \
     mkdir -p /src/dumpvdl2/build && \

README.md

@@ -8,7 +8,7 @@
 
 Docker container for running [dumpvdl2](https://github.com/szpajder/dumpvdl2) and forwarding the received JSON messages to another system or docker container. Best used alongside [ACARS Hub](https://github.com/fredclausen/acarshub).
 
-Builds and runs on `amd64`, `arm64`, `arm/v7`, `arm/v6` and `386` architectures.
+Builds and runs on `amd64`, `arm64`, `arm/v7`.
 
 ## Note for Users running 32-bit Debian Buster-based OSes on ARM
 
@@ -22,6 +22,10 @@ A computer host on a suitable architecture and one USB RTL-SDR dongle connected
 
 The default `SERVER` and `SERVER_PORT` values are suitable for automatically working with ACARS Hub, provided ACARS Hub is **on the same pi as the decoder**. If ACARS Hub is not on the same Pi, please provide the correct host name in the `SERVER` variable. Very likely you will not have to change the `SERVER_PORT`, but if you did change the port mapping on your ACARS Hub (and you will know if you did) please set the server port correctly as well.
 
+## Deprecation Notice
+
+`SERIAL` has been deprecated in favor of `SOAPYSDR`. Please update your configuration accordingly. If `SERIAL` is set the driver will be set to `rtlsdr` and the serial number will be set to the value of `SERIAL`.
+
 ## Up and running
 
 ```yaml
@@ -38,7 +42,7 @@ services:
     ports:
     environment:
       - TZ="America/Denver"
-      - SERIAL=13305
+      - SOAPYSDR=driver=rtlsdr,serial=13305
       - FEED_ID=VDLM
       - FREQUENCIES=136725000;136975000;136875000
     tmpfs:
@@ -51,20 +55,24 @@ services:
 | Variable             | Description                                                                                                                                                                                      | Required | Default |
 | -------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------- | ------- |
 | `TZ`                 | Your timezone                                                                                                                                                                                    | No       | UTC     |
-| `SERIAL`             | The serial number of your RTL-SDR dongle. Exactly one of `SERIAL` or `SOAPYSDR` should be set.                                                                                                   | No       | Blank   |
-| `SOAPYSDR`           | The SoapySDR device string that identifies your dongle. Currently only the SoapyRTLTCP driver is included. Exactly one of `SERIAL` or `SOAPYSDR` should be set.                                  | No       | Blank   |
+| `SOAPYSDR`           | The SoapySDR device string that identifies your dongle. See below for supported soapy sdr types.                                                                                                 | No       | Blank   |
 | `FEED_ID`            | Used by the decoder to insert a unique ID in to the output message                                                                                                                               | Yes      | Blank   |
 | `FREQUENCIES`        | Colon-separated list of frequencies, but to a maximum of 8, for the decoder to list to. No decimal, and all frequencies should be nine digits long.                                              | Yes      | Blank   |
 | `PPM`                | Parts per million correction of the decoder                                                                                                                                                      | No       | 0       |
 | `GAIN`               | The gain applied to the RTL-SDR dongle.                                                                                                                                                          | No       | `40`    |
 | `OVERSAMPLE`         | Overrides the default oversampling rate used by dumpvdl2.                                                                                                                                        | No       | Blank   |
-| `SERVER`             | The server where messages will be forwarded to.                                                                                                                                                  | No       | Blank   |
-| `SERVER_PORT`        | The port where the server will receive messages on.                                                                                                                                              | No       | `5555`  |
 | `VDLM_FILTER_ENABLE` | Filter out non-informational messages. Turning this off (set to a blank value) will cause increased message rate but the messages will be of little value. Will cause extra SD card read/writes. | No       | `TRUE`  |
 | `QUIET_LOGS`         | Mute log output to the bare minimum. Set to `false` to disable.                                                                                                                                  | No       | `TRUE`  |
 | `ZMQ_MODE`           | Output to [zmq](https://zeromq.org) publisher socket. This sets the mode to `client` or `server`.                                                                                                | No       |         |
 | `ZMQ_ENDPOINT`       | Output to [zmq](https://zeromq.org) publisher socket. This sets the `endpoint`. Syntax is `tcp://address:port`                                                                                   | No       |         |
 
-## `acars_router` Note
+## SoapySDR device string
+
+The SoapySDR device string is used to identify your RTL-SDR dongle. The default value is `driver=rtlsdr` which is suitable for most users. If you are using a different SDR, you will need to provide the correct device string. For example, if you are using an Airspy Mini, you would set `SOAPYSDR=driver=airspy`. Pass any additional options for the SDR in via this option as well.
+
+Supported Soapy Drivers:
 
-If you are running `acars_router` you will likely want to set `SERVER` to a blank value. If you do not, and `SERVER` is the default value or an IP/URL that is an acars_hub instance, you will receive duplicate messages!
+- `rtlsdr`
+- `rtltcp`
+- `airspy`
+- `sdrplay`

rootfs/etc/s6-overlay/scripts/01-dumpvdl2

@@ -54,41 +54,6 @@ if [[ -n "$ZMQ_ENDPOINT" ]]; then
   fi
 fi
 
-if [[ -n "${SERIAL}" ]]; then
-	mapfile -t RTL_TEST_OUTPUT < <(timeout 1s rtl_test -d 0 2>&1 | grep -P '^\s+\d+:\s.*?,.*?,\s+SN:\s+.*?$' | IFS=$'\n' sed -n 's/^\s*\([^:]*\):[^,]*,[^,]*,\s*SN:\s*\(.*\)$/\1,\2/; s/\s*$//p' || true)
-	for RTL_TEST_OUTPUT_LINE in "${RTL_TEST_OUTPUT[@]}"; do
-			if [[ "${RTL_TEST_OUTPUT_LINE##*,}" == "$SERIAL" ]]; then
-					OUTPUT_DEVICE_ID="${RTL_TEST_OUTPUT_LINE%%,*}"
-			fi
-	done
-
-	if [[ -z "${OUTPUT_DEVICE_ID}" ]]; then
-			echo "Could not find Device ID for serial '$SERIAL'"
-	fi
-
-	rm -rf /etc/s6-overlay/scripts/dumpvdl2 > /dev/null 2>&1
-	if [[ -n "${OUTPUT_DEVICE_ID}" ]]; then
-		cp /etc/templates/run /etc/s6-overlay/scripts/dumpvdl2
-		sed -i "s/DEVICE_ID=\"\"/DEVICE_ID=\"$OUTPUT_DEVICE_ID\"/g" /etc/s6-overlay/scripts/dumpvdl2
-	else
-		cp /etc/templates/bad /etc/s6-overlay/scripts/dumpvdl2
-	fi
-
-	#sed -i "s/DEVICE_ID=\"\"/DEVICE_ID=\"$OUTPUT_DEVICE_ID\"/g" /etc/s6-overlay/scripts/dumpvdl2
-elif [[ -n "${SOAPYSDR}" ]]; then
-	if ! SoapySDRUtil --probe="${SOAPYSDR}"; then
-		echo "Could not find SoapySDR device for '$SOAPYSDR'"
-		cp /etc/templates/bad /etc/s6-overlay/scripts/dumpvdl2
-	else
-		cp /etc/templates/run /etc/s6-overlay/scripts/dumpvdl2
-	fi
-else
-	echo "One of SERIAL or SOAPYSDR is not set, exiting"
-	exit 1
-fi
-
-s6-chmod 0755 /etc/s6-overlay/scripts/dumpvdl2
-
 mkdir -p /run/acars
 touch /run/acars/vdlm.past5min.json
 

rootfs/etc/templates/run → rootfs/etc/s6-overlay/scripts/dumpvdl2

@@ -15,32 +15,13 @@ VDLM_BIN="/usr/local/bin/dumpvdl2"
 # shellcheck disable=SC2001
 FREQ_STRING=""
 VDLM_CMD=()
-DEVICE_ID=""
+
 
 # Specify device ID
 if [ -n "${SOAPYSDR}" ]; then
 	VDLM_CMD+=("--soapysdr" "$SOAPYSDR")
 elif [ -n "${SERIAL}" ]; then
-	mapfile -t RTL_TEST_OUTPUT < <(timeout 1s rtl_test -d 0 2>&1 | grep -P '^\s+\d+:\s.*?,.*?,\s+SN:\s+.*?$' | IFS=$'\n' sed -n 's/^\s*\([^:]*\):[^,]*,[^,]*,\s*SN:\s*\(.*\)$/\1,\2/; s/\s*$//p' || true)
-	for RTL_TEST_OUTPUT_LINE in "${RTL_TEST_OUTPUT[@]}"; do
-			if [[ "${RTL_TEST_OUTPUT_LINE##*,}" == "$SERIAL" ]]; then
-					OUTPUT_DEVICE_ID="${RTL_TEST_OUTPUT_LINE%%,*}"
-			fi
-	done
-
-	if [[ -z "${OUTPUT_DEVICE_ID}" ]]; then
-			echo "Could not find Device ID for serial '$SERIAL'"
-			exit 1
-	fi
-
-	rm -rf /etc/services.d/dumpvdl2/run > /dev/null 2>&1
-	if [[ -n "${OUTPUT_DEVICE_ID}" ]]; then
-		VDLM_CMD+=("--rtlsdr" "$OUTPUT_DEVICE_ID")
-	else
-		echo "Could not find Device ID for serial '$SERIAL'"
-    sleep 60
-    exit 1
-	fi
+	VDLM_CMD+=("--soapysdr" "driver=rtlsdr,serial=$SERIAL")
 fi
 
 if [ -n "$CENTER_FREQ" ]; then