[pull] master from moby:master #179
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![pull[bot]](https://avatars.githubusercontent.com/in/12910?s=60&v=4){kind=small}
Signed-off-by: MohammadHasan Akbari <[email protected]>
Signed-off-by: CrazyMax <[email protected]>
Signed-off-by: David Karlsson <[email protected]>
history: remove records without attached blobs at startup
…tiple constraints This fixes a problem with the new protobuf marshaling with the standard library. LLB digests are now forced into deterministic marshaling to ensure they produce the same digest when marshaled multiple times. In addition, the marshal cache has also been fixed to work in multi-threaded frontends with multiple different constraints. Previously, if an LLB vertex was used in multiple goroutines and marshaled concurrently, the cache would be broken. This could cause certain problems when a specific node was used multiple times in the same LLB tree. Signed-off-by: Jonathan A. Sternberg <[email protected]>
llb: deterministic marshaling for protobuf and store results from multiple constraints
This test has been flaky, see #5384 Skip on Windows for now as investigations go on. This is to allow the rest of the pipeline to remain unpoisoned. Signed-off-by: Anthony Nandaa <[email protected]>
llbsolver: add input validation to policy recompute
ARGs are inherited by downstream build stages, if declared in a base stage. The documentation ambiguously stated that ARGs are out of scope in other stages, where it really meant other stages that are not child/downstream stages. Signed-off-by: David Karlsson <[email protected]>
full diff: etcd-io/bbolt@v1.3.10...v1.3.11 Signed-off-by: CrazyMax <[email protected]>
vendor: go.etcd.io/bbolt v1.3.11
tests: skip TestContextChangeDirToFile on Windows
docs: remove `from` limitation for onbuild
docs: fix incorrect information about arg scoping
client: allow non-octal chmod config for fileop.copy
Signed-off-by: Tonis Tiigi <[email protected]>
The relative paths option for protoc generators doesn't work well when it comes to dependencies. This simplifies the code generation to avoid using `go generate` and to use one global command for protoc generation. This is similar to docker/buildx#2713 since the same problems with code generation occur here too. Signed-off-by: Jonathan A. Sternberg <[email protected]>
Fix progress lines like `[6/4] step` Signed-off-by: Tonis Tiigi <[email protected]>
Signed-off-by: Tonis Tiigi <[email protected]>
Set error location for ONBUILD errors to the command that pulled in the image with ONBUILD definitions. Currently location was incorrectly set to the first line as ONBUILD was parsed as a separate source code. Location is handled both at parse time (for invalid ONBUILD definition) and run time (when command set via ONBUILD errors). Signed-off-by: Tonis Tiigi <[email protected]>
Return error when AppArmor is unsupported and profile specified
This workaround was added in 414edfa, pending changes in containerd. Those changes were included in containerd 1.7.12, which was vendored in bce2f79, so the workaround should no longer be needed. I also reformatted the code, as there's no longer a need to wrap this function since the list of arguments has been reduced. Signed-off-by: Sebastiaan van Stijn <[email protected]>
protobuf: normalize how protobuf files are generated
vtproto is an extra protobuf compiler that generates special methods suffixed with `VT` that create typed and unrolled marshal and unmarshal functions similar to gogo that can be used for performance sensitive code. These extensions are optional for code to use but buildkit uses them. A codec is also included to utilize vtproto for grpc code. If the package `github.com/moby/buildkit/util/grpcutil/encoding/proto` is imported then vtproto will be used if it exists and otherwise it will use the standard marshaling and unmarshaling methods. This codec has an important difference from the default codec. The default codec will always reset messages before unmarshaling. In most cases, this is unnecessary and is only relevant for `RecvMsg` on streams. In most cases, if we are passing in an existing message to this method, we want to reuse the buffers. This codec will always merge the message when unmarshaling instead of resetting the input message. Signed-off-by: Jonathan A. Sternberg <[email protected]>
Multiple fixes for ONBUILD behavior
dockerfile: add support for non-octal COPY --chmod in labs
Added way to configure SBOM scanner
There is a possibility to get a digest mismatch error if the metadata for previous download does not point to a valid reference anymore. To mitigate this, check that ref that etag points to is still valid before using it. Additionally `.cacheKey` property was not previously set in the cases where old reference was reused. This caused a case where even if the download needed to be performed again, it always failed validation, even if the digest had not actually changed since previous download. There is still a small possibility that gc/prune request will delete the downloaded record in between cachemap and exec call and that the contents changes in the server at that exact time. To fix that case we would need to modify cachemap so that it can keep hold of references until build is complete. Signed-off-by: Tonis Tiigi <[email protected]>
Signed-off-by: David Karlsson <[email protected]>
docs: add --checksum only supports sha256
tests: frontend/dockerfile: update integration tests for windows/wcow
Signed-off-by: CrazyMax <[email protected]>
ci: use edge releases of buildx
When recomputing digests happens, the metadata is lost. This previously happened only with sources that were affected by source policies so it wasn't noticed, but now any LLB Op that is rewritten is affected since the gogo protobuf switch will cause all digests to be rewritten if the frontend and buildkit are using different versions. Signed-off-by: Jonathan A. Sternberg <[email protected]>
Signed-off-by: Tonis Tiigi <[email protected]>
llbsolver: tie op metadata to the op before recomputing digests
Signed-off-by: Tonis Tiigi <[email protected]>
Signed-off-by: Tonis Tiigi <[email protected]>
Signed-off-by: lvyaoting <[email protected]>
chore: fix some function name in comment
Add maximum timeout to each test and log all buildkitd goroutines when a test gets stuck. Currently tests can time out and will print daemon logs but these would already be after shutdown signal is sent to the daemon. Signed-off-by: Tonis Tiigi <[email protected]>
This test can hit rate-limiting from Github and run long. Signed-off-by: Tonis Tiigi <[email protected]>
Follow up on the #5554 PR series. Enabling a number of previously skipped tests for Windows platform. - [x] `testInvalidExporter` - [x] `testParallelLocalBuilds` - [x] `testCallInfo` - [x] `testFrontendVerifyPlatforms` - [x] `testClientCustomGRPCOpts` - [x] `testRunValidExitCodes` Count: 5 > NOTE: this is a top-to-bottom runthrough of all the tests > in `client/client_test.go` that were straight-forward. > The rest will require code changes, especially most needing > `llb.AddMount` support on Windows. These will be addressed > in separate follow-up PRs. Signed-off-by: Anthony Nandaa <[email protected]>
…aces integration: log goroutine trace on test timeout
Calling marshal changes the internal state of the op, for example addCap() helper adds capability constraints. These can race with same map being read by another Marshal call. Locking the Marshal function itself also makes sure that the cache is not recomputed in this case. Signed-off-by: Tonis Tiigi <[email protected]>
no changes in vendored files full diff: moby/moby@v27.4.0-rc.2...v27.4.0 Signed-off-by: Sebastiaan van Stijn <[email protected]>
no changes in vendored files full diff: docker/cli@v27.4.0-rc.2...v27.4.0 Signed-off-by: Sebastiaan van Stijn <[email protected]>
Signed-off-by: Tonis Tiigi <[email protected]>
Signed-off-by: Tonis Tiigi <[email protected]>
update xx to v1.6.1, alpine to 3.21
tests: client: enable a batch of integration tests for wcow (pt.2)
llb: avoid concurrent map write on parallel marshal
vendor: github.com/docker/docker, github.com/docker/cli v27.4.0
dockerfile: add test for step names stability
This is the third patch release of the 1.2.z release branch of runc. It primarily fixes some minor regressions introduced in 1.2.0. - Fixed a regression in use of securejoin.MkdirAll, where multiple runc processes racing to create the same mountpoint in a shared rootfs would result in spurious EEXIST errors. In particular, this regression caused issues with BuildKit. - Fixed a regression in eBPF support for pre-5.6 kernels after upgrading Cilium's eBPF library version to 0.16 in runc. full diff: opencontainers/runc@v1.2.2...v1.2.3 release notes: https://github.com/opencontainers/runc/releases/tag/v1.2.3 Signed-off-by: Sebastiaan van Stijn <[email protected]>
Dockerfile: update runc binary to v1.2.3
Bumps [softprops/action-gh-release](https://github.com/softprops/action-gh-release) from 2.1.0 to 2.2.0. - [Release notes](https://github.com/softprops/action-gh-release/releases) - [Changelog](https://github.com/softprops/action-gh-release/blob/master/CHANGELOG.md) - [Commits](softprops/action-gh-release@01570a1...7b4da11) --- updated-dependencies: - dependency-name: softprops/action-gh-release dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <[email protected]>
…s/action-gh-release-2.2.0 build(deps): bump softprops/action-gh-release from 2.1.0 to 2.2.0
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )