Skip to content

Releases: saltysimulations/salty-747

v0.6.0

20 Apr 14:02
c583e54
Compare
Choose a tag to compare
  • [PFD] Rewrote PFD to match almost all real-world functionality
  • [MODEL] Improved engine startup animation
  • [MODEL] Fixed inboard spoilers not deploying
  • [MODEL] The PTT button now engages TO/GA, for convenience
  • [MODEL] Fixed a bug where some synoptic switches were inop
  • [MODEL] Made the datalink switches (ACPT, CANC, RJCT) interactable
  • [MODEL] Made the yaw damper switch interactable
  • [MODEL] Fixed a bug where pilots were not visible
  • [FUEL] Added automatic fuel management option (disabled by default)
  • [FUEL] Improved fuel flow
  • [FMC] Fixed coordinates inserting at wrong index when using uplink
  • [FMC] The exit waypoint of an airway is now inserted as direct if airway is not found during uplink
  • [FMC] Added support for the less common 11-character coordinate format ("6000N12830W")
  • [FMC] Tuned LNAV
  • [ND] Added position trend vector
  • [SOUND] Fixed a bug where some switches did not make a sound
  • [SOUND] Added new sounds for nearly every switch and knob
  • [TEXTURES] Improved textures
  • [EICAS] Fixed EICAS messages sometimes not appearing when loading in cold and dark
  • [EICAS] Added YAW DAMPER EICAS message
  • [EICAS] Added AIRSPEED LOW EICAS message
  • [OTHER] Salty livery now shows as first livery in livery list
  • [OTHER] Added fuel and payload manager

v0.5.1

26 Apr 15:48
97ec3f2
Compare
Choose a tag to compare
  • [MISC] Added SU9 Compatibility

v0.5.1-rc1

25 Apr 20:23
Compare
Choose a tag to compare
v0.5.1-rc1 Pre-release
Pre-release
chore: bump version

v0.5.0

16 Apr 12:16
d5fd734
Compare
Choose a tag to compare
  • [ND] Added runway markers with extended centerline
  • [ND] Fixed minor ND bugs: clipping and size of VOR R information and wind arrow, WXR returns in plan mode
  • [ND] Fixed when first switching to PLAN mode, map would be incorrectly centered until first press of STEP
  • [ND] Missed approach track now shows in dashed cyan as per 747-8, and changes to solid magenta upon triggering TO/GA
  • [ND] Holding patterns are now always rendered as an undashed line
  • [ND] Cosmetic updates to ND waypoint information
  • [ND] Visual improvements to PLAN mode, including a new mask that now surrounds the compass circle stopping the route being drawn all over the display
  • [ND] Redesigned Waypoint icon to be more accurate.
  • [ND] Fixed some clipping issues with ND border when viewing display popped out
  • [ND] Fixed bug causing duplicate UTC indications
  • [ECL] Added electronic checklist with all normal checklists, closed/open loop items, dynamic conditions
  • [FONTS] Added some misc special characters to EFIS font
  • [FONTS] Reworked EFIS font
  • [EICAS] Pressurization info now blanks out when blanking lower eicas
  • [EICAS] Added seatbelts memo
  • [EICAS] Added HEAT WINDOW L & R advisory messages
  • [EICAS] Normalised the flap position and commanded position indicator so that each setting is linearly spaced
  • [EICAS] Fixed Flap 1 position never reaching active "green" state. Flap 1 now properly indicates state of leading edge devices
  • [EICAS] Various visual adjustments
  • [ECL] ECL now uses new lowercase character set
  • [ECL] ECL now matches the default 747-8i Boeing spec, operator specific checklists such as "AFTER LANDING" have been removed
  • [FM] Fixed flap extension pause when passing each detent
  • [FM] Adjusted fuel flow
  • [FM] Added temporary fix for excessive ground effect and poor control response
  • [MODEL] Fixed some lights not dimming
  • [MODEL] Bank angle selector is now set to AUTO by default
  • [FMC] Improved LNAV turn tracking
  • [FMC] FMC now only accepts flaps 10 or 20 as valid takeoff settings
  • [FMC] Added optional support for syncing MSFS world map flight plan
  • [FMC] Fixed incorrect THR & THR REF indications in VNAV and FLCH
  • [FMC] Missed approach track no longer contributes to destination DTG in progress page
  • [FMC] Fixes throttle levers being able to be moved after transition from HOLD to THR REF on takeoff
  • [FMC] Added variable lead-in distance at start of direct leg to allow for turning onto new course without large overshoot
  • [FMC] Fixed bug causing VNAV CDU page to erroneously display MCP SPD mode in some instances
  • [FMC] Lower EICAS fuel unit now matches upper EICAS fuel unit
  • [FMC] Waypoints on the select desired wpt page are now sorted by proximity
  • [FMC] Fixed a bug where opening an ACARS message would lead to the ATC log page
  • [FMC] Spam-selecting a waypoint on the select desired wpt page no longer causes duplicate waypoints to be inserted
  • [FMC] Fixed ETA in the POS REPORT page
  • [FMC] Cruise level is now blank by default instead of defaulting to FL100
  • [FMC] Added AP debug page
  • [FMC] Fixed minor bugs in the POS REF page
  • [FMC] Fixed a bug causing FMC not to change into CRZ or DES modes due to wrong altimeter source
  • [FMC] Fixed a minor bug with unit conversions
  • [FMC] Added T/D indication in progress page
  • [AP] Fixed AT not activating when switched on if there was a mode change while it was disabled
  • [AP] FLCH now correctly opens the speed window in last FMC commanded speed if switching from VNAV
  • [AP] Fixed speed window not opening if V/S, ALT HOLD or FLCH selected from VNAV
  • [AP] Fixed FLCH not properly engaging if pushed when in either TO or GA modes
  • [AP] Fixed AT going into HOLD mode at 65kts even if TO/GA was not pushed for takeoff
  • [AP] Fixed cycling FD on ground causing AT to go into Takeoff thrust in some circumstances
  • [AP] V/S can now only be in whole increments of 100 feet
  • [AP] Fixed AP behaviour when engaging AP above 400' feet on takeoff.
  • [AP] FLCH now uses VNAV MCP SPD as initial target if selected while VNAV active and in speed intervention mode
  • [AP] FLCH now defaults to current IAS as initial target speed if no valid FMC speed available
  • [AP] Fixed an inconsistency with TO/GA logic depending on whether the keybind or the cockpit switch is used to trigger it
  • [AP] TO/GA no longer engages the AT in SPD mode
  • [AP] It is now possible to fly an ILS without selecting an approach
  • [AP] Once established on an ILS approach, it is no longer possible to select different AFDS modes, except for TO/GA
  • [AP] Fixed a bug which prevented arming the LOC when in HDG HOLD mode
  • [VNAV] Improved behaviour for FLCH, V/S and VNAV SPD
  • [VNAV] Much improved Altitude capture logic
  • [VNAV] New autothrottle from scratch integrated into NavModeSelector, all modes THR REF, THR, SPD, IDLE, HOLD modelled
  • [VNAV] Rewritten FMA backend and added FAC and G/P indications
  • [VNAV] Integrated basic VNAV descent path logic
  • [VNAV] Added T/D marker
  • [VNAV] Add RNAV approach capability through IAN
  • [VNAV] Heading bug automatically syncs to runway heading upon LOC capture
  • [VNAV] New FMC descent mode trigger logic
  • [VNAV] Early descent mode within 50nm of T/D modelled
  • [VNAV] Added VNAV path deviation indicator to ND
  • [VNAV] Cycling flight directors now correctly initialises TO/GA on ground and HDG HOLD & V/S in the air
  • [VNAV] Limit thrust settings used by A/T as a temp workaround for excessive climb and descent rates until flight model can be fixed
  • [VNAV] Add support for LOC, NDB and VOR approaches
  • [VNAV] Removed DES marker
  • [VNAV] Add automatic throttle IDLE at 25' on landing
  • [VNAV] Complete APPR mode button functions.
  • [VNAV] Complete TO/GA special pitch/speed mode logic and limit go around thrust.
  • [VNAV] Add navigation performance scales to PFD
  • [VNAV] Tune LNAV director to prevent current poor lateral tracking and overshooting.
  • [VNAV] Added Constraint delete function to Altitude Knob push button
  • [VNAV] VNAV button now correctly does nothing if pushed when airborne with VNAV already engaged
  • [PFD] V/S bug now disappears from VSI when capturing altitude
  • [PFD] Fixed attitude indicator displaying slightly wrong roll value
  • [PFD] Heading bug and dashed line no longer displays when IRS is not aligned
  • [MCP] Speed window now correctly always opens in IAS mode, never mach
  • [MCP] Fixed bug requiring MCP speed knob to be pushed twice to open in some instances
  • [MCP] Added new fonts for MCP displays
  • [MCP] Fixed IAS/MACH mode text alignment
  • [MCP] Fixed some MCP lights and vertical speed window behaviour
  • [SOUNDS] Added AP disconnect sound
  • [SOUNDS] Added Master Caution sound
  • [SOUNDS] Added C-Chord alert when approaching MCP altitude
  • [QOL] Added pause at T/D feature
  • [MISC] Hard-fork: the aircraft is now independent of the Asobo aircraft and can be selected in the menu

vinstaller-stable

15 Apr 21:18
ba4bc9d
Compare
Choose a tag to compare
vinstaller-stable Pre-release
Pre-release
fix(sounds): c chord volume (#430)

vinstaller

14 Apr 21:46
9f3a136
Compare
Choose a tag to compare
vinstaller Pre-release
Pre-release
build: fragmenter script (#427)

v0.5.0-rc1

02 Feb 15:16
646580f
Compare
Choose a tag to compare
v0.5.0-rc1 Pre-release
Pre-release

v0.5.0-rc1

What's Changed

New Contributors

Full Changelog: v0.4.0...v0.5.0-rc1

v0.4.0

02 Aug 14:29
Compare
Choose a tag to compare
  • CHANGELOG

  • [FMC] Custom Flight Plan Manager from WT integrated, allowing directs, holding, route changes, custom waypoints etc.

  • [FMC] Added direct to functionality.

  • [FMC] Added holding functionality.

  • [FMC] Route changes are now possible.

  • [FMC] Custom waypoints, such as precise coordinates and waypoints based on distance are now possible.

  • [FMC] Redesigned FMC DEP/ARR, RTE and LEGS pages.

  • [FMC] Added new FMC hold page.

  • [FMC] Added new custom font to CDU.

  • [FMC] Updated VNAV pages layout for accuracy.

  • [FMC] SimBrief now properly uplinks airways and lat/long points.

  • [FMC] Fixed FMC failing to initialise bug.

  • [FMC] Corrected FMC cruise altitude formatting.

  • [TEXTURES] Added new decals to cockpit panels.

  • [SOUNDS] Added minimums GPWS callout.

  • [SOUNDS] Added new OVERSPEED warning sound.

  • [SOUNDS] Enabled Asobo "SINK RATE" and "PULL UP" aural warnings.

  • [EICAS] Added reverser "REV" indication to upper EICAS display.

  • [AUTOPILOT] Target MCP alt can now be actively changed when not in ALT hold modes.

  • [AUTOPILOT] Autothrottle now uses more thrust in FLCH SPD and VNAV SPD.

  • [AUTOPILOT] Fixed FLCH bug below 3000'.

  • [VNAV] Added VNAV ALT mode, VNAV will now stop climb/descent when reaching MCP altitude.

  • [VNAV] Custom climb, cruise and descent speeds can be set in VNAV FMC pages.

  • [VNAV] Pushing ALT knob now sets new higher cruise alt in FMC in climb phase, and no longer changes it in descent phase.

  • [VNAV] Fixed bug causing FMC to enter Descent mode when step climbing in VNAV.

  • [A/T] Tuned A/T PID for better autothrottle response.

  • [PFD] Added altitude alert system when approaching MCP altitude with aural warning.

  • [PFD] Redesigned heading indicator on PFD.

  • [PFD] Polished some cosmetic elements on PFD.

  • [PFD] QNH can now be preselected on PFD when in STD mode.

  • [PFD] Added new pitch limit indicator (PLI) to PFD.

  • [PFD] Fixed stall tape sometimes not being visible.

  • [ND] Added TCAS traffic.

  • [ND] Added track line to ND.

  • [ND] Heading bug dashed line now hides after 10 seconds of not being moved when not in HDG SEL or HDG HOLD.

  • [ND] WX radar returns from behind the aircraft no longer show.

  • [ND] The temporary flight plan dashed line no longer draws beyond what is needed, increasing performance.

  • [ND] Minor cosmetic changes.

  • [EICAS] Pressurisation info is now hidden from upper EICAS when not displaying ENG.

  • [FUEL] Added fully functioning fuel jettison system.

  • [FUEL] Added EICAS messages related to STAB tank pump operation.

  • [MODEL] Adjusted default state of various knobs.

  • [MISC] Slightly shrunk the size of all displays to add a "deadzone" edge area as present on the LCDs.

v0.4.0-rc2

12 Jul 16:53
8b50afb
Compare
Choose a tag to compare
v0.4.0-rc2 Pre-release
Pre-release

Release candidate 2 for version 0.4.0.

v0.4.0-rc1

10 Jul 18:23
8b50afb
Compare
Choose a tag to compare
v0.4.0-rc1 Pre-release
Pre-release

Release candidate 1 for version 0.4.0.