Fixing let for mega

README.md

@@ -39,7 +39,7 @@ from other files in this repository. On linux systems, invoke `$ sudo make insta
 Usage
 -----
 
-As of version 0.9.1, the usage is:
+As of version 0.9.2, the usage is:
 
 ```
 Usage: microscheme [-aucvrio] [-m model] [-d device] [-w filename] [-t rounds] program[.ms]

ffi_stuff/dump.py

@@ -4,7 +4,7 @@
 import sys
 
 
-ser = serial.Serial(sys.argv[1], 1000000)
+ser = serial.Serial(sys.argv[1], 9600)
 ser.flushInput()
 ser.close()
 
@@ -18,6 +18,4 @@
 
 while 1:
 	b1 = ser.read()
-	b2 = ser.read()
-	val = (ord(b1) << 8) + ord(b2)
-	print (str(val))
+	print (str(b1))

src/codegen.c

@@ -437,7 +437,7 @@ void codegen_emit(AST_expr *expr, int parent_numArgs, FILE *outputFile) {
 			}
 
 			else if (strcmp(expr->primproc, "stacksize") == 0 && expr->numBody == 0) {
-				fprintf(outputFile, "\tIN GP1, SPl\n\tIN GP2, SPh\n\tLDI CRSl, lo8(RAMEND)\n\tLDI CRSh, hi8(RAMEND)\n\tSUB CRSl, GP1\n\tSBC CRSh, GP2\n");
+				fprintf(outputFile, "\tIN GP1, SPl\n\tIN GP2, SPh\n\tLDI CRSl, lo8(__stack)\n\tLDI CRSh, hi8(__stack)\n\tSUB CRSl, GP1\n\tSBC CRSh, GP2\n");
 			}
 
 			else if (strcmp(expr->primproc, "heapsize") == 0 && expr->numBody == 0) {

src/main.c

@@ -62,7 +62,7 @@ int main(int argc, char *argv[]) {
 	char *inname, *outname, *basename, *shortbase;
 	int c;
 
-	fprintf(stdout, "Microscheme 0.9.1, (C) Ryan Suchocki\n");
+	fprintf(stdout, "Microscheme 0.9.2, (C) Ryan Suchocki\n");
 
 	char *helpmsg = "\nUsage: microscheme [-aucvrio] [-m model] [-d device] [-w filename] [-t rounds] program[.ms]\n\n"
 			"Option flags:\n"

src/models.c

@@ -26,6 +26,9 @@ model_info models[] = {
 		".EQU	DDR13,	0x04	\n"
 		".EQU	P13,	7		\n"
 
+		// This is necessary to stay within 13-bit addresses!
+		".EQU	_ms_stack,	0x2000\n"
+
 		".EQU	UDR0,	0xC6	\n"
 		".EQU	UBRR0H,	0xC5	\n"
 		".EQU	UBRR0L,	0xC4	\n"
@@ -52,6 +55,8 @@ model_info models[] = {
 		".EQU	DDR13,	0x04	\n"
 		".EQU	P13,	5		\n"
 
+		".EQU	_ms_stack,	__stack\n"
+
 		".EQU	UDR0,	0xC6	\n"
 		".EQU	UBRR0H,	0xC5	\n"
 		".EQU	UBRR0L,	0xC4	\n"
@@ -77,6 +82,8 @@ model_info models[] = {
 		".EQU	PORT13,	0x08	\n"
 		".EQU	DDR13,	0x07	\n"
 		".EQU	P13,	7		\n"
+
+		".EQU	_ms_stack,	__stack\n"
 	}
 };
 

src/parser.c

@@ -15,7 +15,7 @@ extern bool opt_verbose;
 extern char **globalIncludeList;
 extern int globalIncludeListN;
 
-AST_expr *currentLambda = NULL, *tmpLambda = NULL;
+AST_expr *currentLambda = NULL;
 
 void parser_initExpr(AST_expr *expr) {
 	expr->type = Constant;
@@ -144,7 +144,7 @@ AST_expr *parser_parseExpr(lexer_tokenNode **token, int numTokens, bool topLevel
 									exit(EXIT_FAILURE);
 								}
 
-								tmpLambda = currentLambda;
+								AST_expr *tmpLambda = currentLambda;
 								currentLambda = result;
 									result->numBody = innerNumTokens-2;
 									result->body = try_malloc(sizeof(AST_expr*) * (innerNumTokens-2));

src/preamble.s

@@ -71,24 +71,15 @@ LDI 	HFPl,	lo8(_end)
 LDI		HFPh,	hi8(_end)
 LDI		CCPl,	0
 LDI		CCPh,	0
-LDI		AFPl,	lo8(__stack)
-LDI		AFPh,	hi8(__stack)
+LDI		AFPl,	lo8(_ms_stack)
+LDI		AFPh,	hi8(_ms_stack)
+
+OUT SPl, AFPl
+OUT SPh, AFPh
 
 SBI	DDR13,	P13
 CBI	PORT13,	P13
 
-# ; Set Baud Rate registers
-# 	LDI GP1,	hi8(BAUD_9600)
-# 	STS	UBRR0H,	GP1				;; ..1H for mega 1
-# 	LDI	GP1,	lo8(BAUD_9600)
-# 	STS	UBRR0L,	GP1				;; ..1L for mega 1
-
-# ; Set control registers
-# 	CLR GP1
-# 	SBR GP1,	TXENm
-# 	SBR GP1,	RXENm
-# 	STS UCSR0B,	GP1				;; ..1B for mega 1
-
 RJMP entry_point
 
 proc_call:

src/stdlib.ms

@@ -120,7 +120,7 @@
 									#x109	#x109	#x23	#x23	#x23	#x23))
 		(set! arduino-pins	(vector 1 2 16 32 32 8 8 16 32 64 16 32 64 128 2 1 2 1 8 4 2 1 1 2 4 
 									8 16 32 64 128 128 64 32 16 8 4 2 1 128 4 2 1 128 64 32 16 8 
-									4 2 1 8 4 2 1 1 2 4 8 16 32 64 128 1 2 4 8 16 32 64 128))))
+									4 2 1 8 4 2 1))))
 
 (@if-model "UNO"
 	(begin