ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets

[ Upstream commit d8f2038 ]

The x86 Android tablets on which quirks to skip looking for a matching
UartSerialBus resource and instead unconditionally create a serial bus
device (serdev) are necessary there are 2 sorts of serialports:

ACPI enumerated highspeed designware UARTs, these are the ones which
typcially need to be skipped since they need a serdev for the attached
BT HCI.

A PNP enumerated UART which is part of the PCU. So far the existing
quirks have ignored this. But on the Lenovo Yoga Tablet 2 Pro 1380
models this is used for a custom fastcharging protocol. There is
a Micro USB switch which can switch the USB data lines to this uart
and then a 600 baud protocol is used to configure the charger for
a voltage higher then 5V.

Add a new ACPI_QUIRK_PNP_UART1_SKIP quirk type and set this for
the existing entry for the Lenovo Yoga Tablet 2 830 / 1050 models.
Note this will lead to unnecessarily also creating a serdev for
the PCU UART on the 830 / 1050 which don't need this, but the UART
is not used otherwise there so that is not a problem.

Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

drivers/acpi/x86/utils.c

@@ -257,9 +257,10 @@ bool force_storage_d3(void)
 #define ACPI_QUIRK_SKIP_I2C_CLIENTS				BIT(0)
 #define ACPI_QUIRK_UART1_SKIP					BIT(1)
 #define ACPI_QUIRK_UART1_TTY_UART2_SKIP				BIT(2)
-#define ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY			BIT(3)
-#define ACPI_QUIRK_USE_ACPI_AC_AND_BATTERY			BIT(4)
-#define ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS			BIT(5)
+#define ACPI_QUIRK_PNP_UART1_SKIP				BIT(3)
+#define ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY			BIT(4)
+#define ACPI_QUIRK_USE_ACPI_AC_AND_BATTERY			BIT(5)
+#define ACPI_QUIRK_SKIP_GPIO_EVENT_HANDLERS			BIT(6)
 
 static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
 	/*
@@ -339,6 +340,7 @@ static const struct dmi_system_id acpi_quirk_skip_dmi_ids[] = {
 			DMI_MATCH(DMI_BIOS_VERSION, "BLADE_21"),
 		},
 		.driver_data = (void *)(ACPI_QUIRK_SKIP_I2C_CLIENTS |
+					ACPI_QUIRK_PNP_UART1_SKIP |
 					ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY),
 	},
 	{
@@ -437,14 +439,18 @@ static int acpi_dmi_skip_serdev_enumeration(struct device *controller_parent, bo
 	if (ret)
 		return 0;
 
-	/* to not match on PNP enumerated debug UARTs */
-	if (!dev_is_platform(controller_parent))
-		return 0;
-
 	dmi_id = dmi_first_match(acpi_quirk_skip_dmi_ids);
 	if (dmi_id)
 		quirks = (unsigned long)dmi_id->driver_data;
 
+	if (!dev_is_platform(controller_parent)) {
+		/* PNP enumerated UARTs */
+		if ((quirks & ACPI_QUIRK_PNP_UART1_SKIP) && uid == 1)
+			*skip = true;
+
+		return 0;
+	}
+
 	if ((quirks & ACPI_QUIRK_UART1_SKIP) && uid == 1)
 		*skip = true;