Rust Driver for TB6612FNG Motor Driver

This is a no_std driver for the TB6612FNG motor driver as can e.g. be found on the corresponding SparkFun module.

Note that this work is not affiliated with any of the vendors of the controller or controller boards.

The motor driver itself supports two motors and has a standby pin which controls both at the same time. The crate can be either used to control a single motor (using the Motor struct directly) or to control both motors (using the Tb6612fng struct) - the latter also supports using the standby functionality.

See the documentation for usage examples.

When to use what

• You plan on using both motors and the standby feature: use Tb6612fng
• You plan on using both motors without the standby feature: use two separate Motors
• You plan on using a single motor with the standby feature: use Motor and control the standby pin manually
• You plan on using a single motor without the standby feature: use Motor

Examples

A simple example for the STM32F4 microcontrollers is available.

Changelog

For the changelog please see the dedicated CHANGELOG.md.

Minimum Supported Rust Version (MSRV)

This crate is guaranteed to compile on stable Rust 1.81 and up. It might compile with older versions but that may change in any new patch release.

License

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)

at your option.

Contribution

Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.