sync 23/09 #161
Closed
sync 23/09 #161
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Remove unused kernel 6.1 version file. Signed-off-by: Mieczyslaw Nalewaj <[email protected]> Link: openwrt#16450 Signed-off-by: Robert Marko <[email protected]>
The sysupgrade-tar image build is not defined for this target, do not add a build instruction for it. The build system will use the definition from the dna_valokuitu-plus-ex400 board and the build will fail. This fixes the build of the ramips target. Fixes: 665c215 ("ramips: add basic support for tp-link er605-v2") Signed-off-by: Hauke Mehrtens <[email protected]>
Rename the sysupgrade.tar step to sysupgrade.bin. The sysupgrade.tar is used in other places and we prefer a sysupgrade.bin instead. Fixes: fea2264 ("ramips: mt7621: Add DNA Valokuitu Plus EX400") Signed-off-by: Hauke Mehrtens <[email protected]>
The driver for fixed voltage regulater uses "regulator-fixed" for compatible string, not "fixed-regulator". Fixes: 102dc5a ("mvebu: add support for FortiGate 50E") Signed-off-by: INAGAKI Hiroshi <[email protected]> Link: openwrt#16409 Signed-off-by: Hauke Mehrtens <[email protected]>
The mdio bus number of mv88e6xxx was changed to '0' from '1' and the "mv88e6xxx-1:<addr>:<speed>" triggers are unavailable now. Update triggers for "SPEED" LEDs to make working that LEDs again. Signed-off-by: INAGAKI Hiroshi <[email protected]> Link: openwrt#16409 Signed-off-by: Hauke Mehrtens <[email protected]>
Update sysupgrade script (fortinet.sh) for Fortinet devices in
mvebu/cortexa9 and fix the following issues,
- Some individuals of FortiGate/FortiWiFi 30E/5xE devices has wrong
kernel/rootfs offsets in "firmware-info" partition and they are not
updated with the current sysupgrade script for Fortinet devices
(fortinet.sh).
As a result, the bootloader tries to load kernel data from the wrong
address and boot with it after OpenWrt installation.
The new script handles offsets in addition to length values.
and improve the following points.
- Only 2 bytes are handled with the current sysupgrade script
(fortinet.sh) for kernel/rootfs length. The new script handles 4 bytes
instead.
- The image names of image0/image1 are not handled and not updated when
sysupgrade. The new sysupgrade script handles it and update to
"<dist> <version> <revision>" if firmware metadata is available.
(ex.: "OpenWrt SNAPSHOT r27440-25384026")
log of new sysupgrade script (fortinet.sh):
Tue Sep 17 10:29:16 UTC 2024 upgrade: Performing system upgrade...
Image Index: 0
Image Name : "OpenWrt SNAPSHOT r27440-25384026"
--> "OpenWrt SNAPSHOT r27441-b3a0806a05"
kernel:
old: 0x003c4e00@0x00200000
new: 0x003c4e00@0x00200000
rootfs:
old: 0x005c0200@0x00800000
new: 0x005c0200@0x00800000
Unlocking kernel ...
Signed-off-by: INAGAKI Hiroshi <[email protected]>
Link: openwrt#16409
Signed-off-by: Hauke Mehrtens <[email protected]>
Swap incorrect WLAN leds assignment between WLAN 2.4 and 5 GHz for TP-Link EC220-G5 v2 Signed-off-by: Mieczyslaw Nalewaj <[email protected]> Link: openwrt#16331 Signed-off-by: Hauke Mehrtens <[email protected]>
We have <netinet/sctp.h> header in lksctp-tools package, but having this var set to 'no' prevents package's configure to detect it. Signed-off-by: Aleksey Vasilenko <[email protected]> Link: openwrt#16441 Signed-off-by: Hauke Mehrtens <[email protected]>
Backport ir-receiver/minipcie/poweroff/spi/usb-c support and other minor fixes for the NanoPC T6 board. Signed-off-by: Tianling Shen <[email protected]> Link: openwrt#16443 Signed-off-by: Hauke Mehrtens <[email protected]>
This commit bumps tfa-layerscape package to version lf-6.6.23-2.0.0 Manually rebased: 001-fiptool-hostbuild-fixes.patch Signed-off-by: Pawel Dembicki <[email protected]> Link: openwrt#16360 Signed-off-by: Hauke Mehrtens <[email protected]>
This commit bumps u-boot layerscape package to lf-6.6.23-2.0.0 version. Manually rebased: 0900-layerscape-adjust-LS1021A-IOT-config-for-OpenWrt.patch Signed-off-by: Pawel Dembicki <[email protected]> Link: openwrt#16360 Signed-off-by: Hauke Mehrtens <[email protected]>
This commit bumps restool layerscape package to lf-6.6.23-2.0.0 version. Patch was refreshed. Signed-off-by: Pawel Dembicki <[email protected]> Link: openwrt#16360 Signed-off-by: Hauke Mehrtens <[email protected]>
Bump ls-rcw package to lf-6.6.23-3.0.0. Signed-off-by: Pawel Dembicki <[email protected]> Link: openwrt#16360 Signed-off-by: Hauke Mehrtens <[email protected]>
Update ls-dpl to latest 10.39.0 version. Signed-off-by: Pawel Dembicki <[email protected]> Link: openwrt#16360 Signed-off-by: Hauke Mehrtens <[email protected]>
Update ls-mc to latest 10.39.0 version. Signed-off-by: Pawel Dembicki <[email protected]> Link: openwrt#16360 Signed-off-by: Hauke Mehrtens <[email protected]>
Accept 'device' option, allowing to specify custom l3 device name, instead of default autogenerated one (prefix "6in4-" + interface name) Signed-off-by: Aleksandr V. Piskunov <[email protected]> Link: openwrt#15961 Signed-off-by: Hauke Mehrtens <[email protected]>
Same as fqdn support in GRE (commit a79f3d1) and IPIP (commit 3116829) Signed-off-by: Aleksandr V. Piskunov <[email protected]> Link: openwrt#15961 Signed-off-by: Hauke Mehrtens <[email protected]>
Same as 'nohostroute' option for GRE tunnels (commit 0f8b9ad) and IPIP tunnels (commit 46ce629) Signed-off-by: Aleksandr V. Piskunov <[email protected]> Link: openwrt#15961 Signed-off-by: Hauke Mehrtens <[email protected]>
Changelog: https://mesonbuild.com/Release-notes-for-1-5-0.html Signed-off-by: Yegor Yefremov <[email protected]> Link: openwrt#16425 Signed-off-by: Hauke Mehrtens <[email protected]>
1- The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s. It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125 2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs. 2- Renamed 000-backport-upstream-dts-sync.patch -> 000-v2024.10-rc1-backport-upstream-dts-sync.patch to add the version when was applied upstream Signed-off-by: Antonio Flores <[email protected]> Link: openwrt#16275 Signed-off-by: Hauke Mehrtens <[email protected]>
Hardware Spec
-SoC: Rockchip RK3588S
CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265
NPU: 6TOPs, supports INT4/INT8/INT16/FP16
-RAM: 64-bit 4GB/8GB LPDDR4X at 2133MHz
-Flash: 32GB/None eMMC, at HS400 mode
-Ethernet: one Native Gigabit Ethernet, and one PCIe 2.5G Ethernet
-USB: one USB 3.0 Type-A and one USB 2.0 Type-A
-PCIe: one M.2 Key M connector with PCIe 2.1 x1
-HDMI:
compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation
support up to 7680x4320@60Hz
Support RGB/YUV(up to 10bit) format
-microSD: support up to SDR104 mode
-GPIO:
30-pin 2.54mm header connector
up to 1x SPI, 3x UARTs, 3x I2Cs, 2x SPDIFs, 1x I2Ss, 3x PWMs, 20x GPIOs
-Debug: UART via 3-Pin 2.54mm header, or on-board USB-C to UART
-LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN, LED1)
-others:
2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
MASK button for eMMC update
one user button
-Power supply: USB-C, support PD, 5V/9V/12V/20V input
-PCB: 8 Layer, 62x90x1.6mm
-Ambient Operating Temperature: 0℃ to 70℃
Installation:
Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*)
eMMC Installation:
Boot from the SD card
Uncompress the OpenWrt sysupgrade image
fash to eMMC : dd if=*.img of=/dev/mmcblk1
sync
remove SD card
reboot
Signed-off-by: Antonio Flores <[email protected]>
Link: openwrt#16275
Signed-off-by: Hauke Mehrtens <[email protected]>
Improvement and fixes for the nanopi r6 series, pending on the kernel mailing list https://lore.kernel.org/all/[email protected] Signed-off-by: Antonio Flores <[email protected]> Link: openwrt#16275 Signed-off-by: Hauke Mehrtens <[email protected]>
This patch add a version to uboot patches to help identify in futures updates when they were upstreamed. Signed-off-by: Antonio Flores <[email protected]> Link: openwrt#16275 Signed-off-by: Hauke Mehrtens <[email protected]>
This commits fixes the LED on the NanoPi R6 series after changes in the DTS https://lore.kernel.org/all/[email protected] Reported by Github user: gSpotx2f Signed-off-by: Antonio Flores <[email protected]> Link: openwrt#16275 Signed-off-by: Hauke Mehrtens <[email protected]>
Changes: https://git.tcpdump.org/libpcap/blob/bbcbc9174df3298a854daee2b3e666a4b6e5383a:/CHANGES Signed-off-by: Ivan Pavlov <[email protected]> Link: openwrt#16401 Signed-off-by: Hauke Mehrtens <[email protected]>
Changes: https://git.tcpdump.org/tcpdump/blob/4a789712f187e3ac7b2c0044c3a3f8c71b83646e:/CHANGES Signed-off-by: Ivan Pavlov <[email protected]> Link: openwrt#16402 Signed-off-by: Hauke Mehrtens <[email protected]>
- This release fixes CVE-2024-45157, CVE-2024-45158, CVE-2024-45159 - Use official release archive instead of git mirror - Update website url Signed-off-by: Yanase Yuki <[email protected]> Link: openwrt#16371 Signed-off-by: Hauke Mehrtens <[email protected]>
- Remove unnecessary SourceForge mirror - Use HTTPS url Signed-off-by: Yanase Yuki <[email protected]> Link: openwrt#16372 Signed-off-by: Hauke Mehrtens <[email protected]>
Simplifies the error path and avoids having to handle -EPROBE_DEFER manually. Signed-off-by: Rosen Penev <[email protected]> Link: openwrt#16416 Signed-off-by: Hauke Mehrtens <[email protected]>
Ipv6 delegate option is not respected by proto of ppp/pptp/pppoe/pppoa this add support for them. Signed-off-by: Chen Minqiang <[email protected]> Link: openwrt#15508 Signed-off-by: Hauke Mehrtens <[email protected]>
Ipv6 delegate option is not respected by proto mbim this add support for it. Signed-off-by: Chen Minqiang <[email protected]> Link: openwrt#15508 Signed-off-by: Hauke Mehrtens <[email protected]>
Ipv6 delegate option is not respected by proto ncm this add support for it. Signed-off-by: Chen Minqiang <[email protected]> Link: openwrt#15508 Signed-off-by: Hauke Mehrtens <[email protected]>
Ipv6 delegate option is not respected by proto qmi this add support for it. Signed-off-by: Chen Minqiang <[email protected]> Link: openwrt#15508 Signed-off-by: Hauke Mehrtens <[email protected]>
This make source based IPv6 routing option available for directip Signed-off-by: Chen Minqiang <[email protected]> Link: openwrt#15508 Signed-off-by: Hauke Mehrtens <[email protected]>
Ipv6 delegate option is not respected by proto directip this add support for it. Signed-off-by: Chen Minqiang <[email protected]> Link: openwrt#15508 Signed-off-by: Hauke Mehrtens <[email protected]>
Add u-boot support based on the kernel dts introduced in d101644 and the GL-MT6000 u-boot support in fe10f97. The pcie-mediatek-gen3 kernel driver doesn't like hotplug, so to work in PCIe mode, the 5G modem on this device needs to be switched on by u-boot before starting the kernel. Include an init_modem step in the boot_system action to set the relevant gpios. (The factory bootloader does the same, using Mediatek SDK-specific gpio_power_clr and gpio_pull_up.) Ideally the modem would be started using gpio-hog in the device tree, but this will need to wait until mediatek gpio-hog support is fixed upstream: https://lore.kernel.org/u-boot/6ef2583e85eea60560d7776377d662779e7c44e5.1722419839.git.chris@arachsys.com/ The bootloader can be replaced using the built-in web interface of the factory bootloader. Hold the reset button for five seconds while powering on the device and it will boot into a recovery http server. http://192.168.1.1/uboot.html and http://192.168.1.1/bl2.html can then be used to upload openwrt-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip and openwrt-mediatek-filogic-glinet_gl-x3000-preloader.bin respectively. Alternatively, from a root shell on the running system, unlock the boot partition with echo 0 >/sys/block/mmcblk0boot0/force_ro then write openwrt-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip to /dev/mmcblk0p4 and openwrt-mediatek-filogic-glinet_gl-x3000-preloader.bin to /dev/mmcblk0boot0. Signed-off-by: Chris Webb <[email protected]> Link: openwrt#15645 Signed-off-by: Hauke Mehrtens <[email protected]>
1. Remove outdated symbol CONFIG_USB_OHCI_ATH79.
The ath79 OHCI USB was already supported by the generic driver
kmod-usb-ohci. And this kernel symbol has been dropped since
upstream commit:
53d473fc1e38 ("usb: host: Remove the deprecated ATH79 USB host config options")
2. Add ath79 USB phy package to the OHCI dependencies.
Both EHCI and OHCI require it on the ath79 target.
Signed-off-by: Shiji Yang <[email protected]>
Link: openwrt#16380
Signed-off-by: Hauke Mehrtens <[email protected]>
We already have an kernel module package "kmod-phy-ath79-usb" to drive the ath79 USB. It will be selected by the usb base package "kmod-usb2" and "kmod-usb-ohci". Signed-off-by: Shiji Yang <[email protected]> Link: openwrt#16380 Signed-off-by: Hauke Mehrtens <[email protected]>
Allow to build ath11k and other drivers using qcom-qmi-helpers together (eg. ath12k). Signed-off-by: Janusz Dziedzic <[email protected]> Link: openwrt#15945 Signed-off-by: Hauke Mehrtens <[email protected]>
Add upstream ath12k 802.11BE driver support. Allow to build and use it from openwrt. Tested on BPI-R4/BPI-R64 with: - Qualcomm Technologies, Inc WCN785x Wi-Fi 7(802.11be) 320MHz 2x2 [FastConnect 7800] (rev 01) Signed-off-by: Janusz Dziedzic <[email protected]> Link: openwrt#15945 Signed-off-by: Hauke Mehrtens <[email protected]>
Add option to add WCN7850 ath12k firmware. Signed-off-by: Janusz Dziedzic <[email protected]> Link: openwrt#15945 Signed-off-by: Hauke Mehrtens <[email protected]>
Fix ltssm crashes on BPI-Rx boards. Seems read32/write32 using wrong address which is not a problem on x86/64 PCI controllers. But have issues on BPI-Rx boards. Signed-off-by: Janusz Dziedzic <[email protected]> Link: openwrt#15945 Signed-off-by: Hauke Mehrtens <[email protected]>
This updates the following firmware files: amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam17h.bin amd64-microcode/lib/firmware/amd-ucode/microcode_amd_fam19h.bin amdgpu-firmware/lib/firmware/amdgpu/* ar3k-firmware/lib/firmware/qca/hpnv21.bin ar3k-firmware/lib/firmware/qca/hpnv21g.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010a.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_010b.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010a.bin ar3k-firmware/lib/firmware/qca/nvm_usb_00130201_gf_010b.bin ar3k-firmware/lib/firmware/qca/rampatch_usb_00130201.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/amss.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/board-2.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.0/m3.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/amss.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin ath11k-firmware-wcn6855/lib/firmware/ath11k/WCN6855/hw2.1/m3.bin ath12k-firmware-wcn7850/lib/firmware/ath12k/WCN7850/hw2.0/board-2.bin ibt-firmware/lib/firmware/intel/ibt-0040-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0040-4150.sfi ibt-firmware/lib/firmware/intel/ibt-0041-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0180-0041.sfi ibt-firmware/lib/firmware/intel/ibt-0180-1050.sfi ibt-firmware/lib/firmware/intel/ibt-0180-4150.sfi ibt-firmware/lib/firmware/intel/ibt-0291-0291.sfi ibt-firmware/lib/firmware/intel/ibt-1040-0041.sfi ibt-firmware/lib/firmware/intel/ibt-1040-1050.sfi ibt-firmware/lib/firmware/intel/ibt-1040-4150.sfi ibt-firmware/lib/firmware/intel/ibt-17-16-1.sfi ibt-firmware/lib/firmware/intel/ibt-17-2.sfi ibt-firmware/lib/firmware/intel/ibt-18-16-1.sfi ibt-firmware/lib/firmware/intel/ibt-18-2.sfi intel-igpu-firmware-guc/lib/firmware/i915/adlp_guc_70.bin intel-igpu-firmware-guc/lib/firmware/i915/dg1_guc_70.bin intel-igpu-firmware-guc/lib/firmware/i915/dg2_guc_70.bin intel-igpu-firmware-guc/lib/firmware/i915/mtl_guc_70.bin intel-igpu-firmware-guc/lib/firmware/i915/tgl_guc_70.bin intel-igpu-firmware-huc/lib/firmware/i915/dg2_huc_gsc.bin iwlwifi-firmware-ax200/lib/firmware/iwlwifi-cc-a0-77.ucode iwlwifi-firmware-ax201/lib/firmware/iwlwifi-QuZ-a0-hr-b0-77.ucode iwlwifi-firmware-ax210/lib/firmware/iwlwifi-ty-a0-gf-a0.pnvm iwlwifi-firmware-be200/lib/firmware/iwlwifi-gl-c0-fm-c0.pnvm mt7921bt-firmware/lib/firmware/mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin mt7922bt-firmware/lib/firmware/mediatek/BT_RAM_CODE_MT7922_1_1_hdr.bin r8169-firmware/lib/firmware/rtl_nic/rtl8126a-3.fw Link: openwrt#16458 Signed-off-by: Hauke Mehrtens <[email protected]>
Add missing ksym CONFIG_RUST Building r27563 without this commit will fail due to this ksym being undefined in the generic config. Build system: x86/64 Build-tested: x86/64/AMD Cezanne Run-tested: x86/64/AMD Cezanne Signed-off-by: John Audia <[email protected]> Link: openwrt#16464 Signed-off-by: Robert Marko <[email protected]>
Avoids having to handle EPROBE_DEFER manually. Signed-off-by: Rosen Penev <[email protected]> Link: openwrt#16456 Signed-off-by: Robert Marko <[email protected]>
sync 23/09
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Thanks for your contribution to OpenWrt!
To help keep the codebase consistent and readable,
and to help people review your contribution,
we ask you to follow the rules you find in the wiki at this link
https://openwrt.org/submitting-patches
Please remove this message before posting the pull request.