feat: Create data disk for external image

readme.md

@@ -271,9 +271,21 @@ kubectl apply -f kubernetes.yml
 
 ### What image formats are supported?
 
-  You can set the `BOOT` URL to any `.iso`, `.img`, `.raw`, `.qcow2`, `.vhd`, `.vhdx`, `.vdi` or `.vmdk` file.
+  The `BOOT` URL accepts files in any of the following formats:
+
+  | **Extension** | **Format**   |
+  |---|---|
+  | `.img`       | Raw           |
+  | `.raw`       | Raw           |
+  | `.iso`        | Optical       |
+  | `.qcow2` | QEMU         |
+  | `.vmdk`   | VMware      |
+  | `.vhd`       | VirtualPC   |
+  | `.vhdx`     | Hyper-V     |
+  | `.vdi`        | VirtualBox |
 
-  It will even automaticly extract compressed images, like `.img.gz`, `.qcow2.xz`, `.iso.zip` and many more!
+> [!TIP]
+> It will also accept `.img.gz`, `.qcow2.xz`, `.iso.zip` and many more, as it automaticly extracts compressed files.
 
 ## Stars 🌟
 [![Stars](https://starchart.cc/qemus/qemu-docker.svg?variant=adaptive)](https://starchart.cc/qemus/qemu-docker)

src/disk.sh

@@ -397,12 +397,11 @@ addMedia () {
 
   local DISK_FILE=$1
   local DISK_TYPE=$2
-  local DISK_BUS=$3
-  local DISK_INDEX=$4
-  local DISK_ADDRESS=$5
+  local DISK_INDEX=$3
+  local DISK_ADDRESS=$4
 
   local index=""
-  local DISK_ID="cdrom$DISK_BUS"
+  local DISK_ID="cdrom$DISK_INDEX"
   [ -n "$DISK_INDEX" ] && index=",bootindex=$DISK_INDEX"
   local result=" -drive file=$DISK_FILE,id=$DISK_ID,format=raw,cache=unsafe,readonly=on,media=cdrom"
 
@@ -417,8 +416,8 @@ addMedia () {
       ;;
     "ide" )
       result+=",if=none \
-      -device ich9-ahci,id=ahci${DISK_BUS},addr=$DISK_ADDRESS \
-      -device ide-cd,drive=${DISK_ID},bus=ahci${DISK_BUS}.0${index}"
+      -device ich9-ahci,id=ahci${DISK_INDEX},addr=$DISK_ADDRESS \
+      -device ide-cd,drive=${DISK_ID},bus=ahci${DISK_INDEX}.0${index}"
       echo "$result"
       ;;
     "blk" | "virtio-blk" )
@@ -529,12 +528,12 @@ addDevice () {
 html "Initializing disks..."
 
 [ -z "${DISK_OPTS:-}" ] && DISK_OPTS=""
-[ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
 [ -z "${DISK_TYPE:-}" ] && DISK_TYPE="scsi"
+[ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
 
 case "${DISK_TYPE,,}" in
   "ide" | "usb" | "scsi" | "blk" | "auto" ) ;;
-  * ) error "Invalid DISK_TYPE specified, value \"$DISK_TYPE\" is unrecognized!" && exit 80 ;;
+  * ) error "Invalid DISK_TYPE specified, value \"$DISK_TYPE\" is not recognized!" && exit 80 ;;
 esac
 
 case "${MACHINE,,}" in
@@ -556,27 +555,30 @@ fi
 
 case "${MEDIA_TYPE,,}" in
   "ide" | "usb" | "scsi" | "blk" | "auto" ) ;;
-  * ) error "Invalid MEDIA_TYPE specified, value \"$MEDIA_TYPE\" is unrecognized!" && exit 80 ;;
+  * ) error "Invalid MEDIA_TYPE specified, value \"$MEDIA_TYPE\" is not recognized!" && exit 80 ;;
 esac
 
 if [ -f "$BOOT" ] && [ -s "$BOOT" ]; then
-  DISK_OPTS+=$(addMedia "$BOOT" "$MEDIA_TYPE" "0" "$BOOT_INDEX" "0x5")
+  case "${BOOT,,}" in
+    *".iso" )
+        DISK_OPTS+=$(addMedia "$BOOT" "$MEDIA_TYPE" "$BOOT_INDEX" "0x5") ;;
+    *".img" | *".raw" )
+        DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "$BOOT_INDEX" "0x5" "raw" "$DISK_IO" "$DISK_CACHE") ;;
+    *".qcow2" )
+        DISK_OPTS+=$(createDevice "$BOOT" "$DISK_TYPE" "$BOOT_INDEX" "0x5" "qcow2" "$DISK_IO" "$DISK_CACHE") ;;
+    * )
+        error "Invalid BOOT image specified, extension \".${BOOT/*./}\" is not recognized!" && exit 80 ;;
+  esac
 fi
 
 DRIVERS="/drivers.iso"
 [ ! -f "$DRIVERS" ] || [ ! -s "$DRIVERS" ] && DRIVERS="$STORAGE/drivers.iso"
 
 if [ -f "$DRIVERS" ] && [ -s "$DRIVERS" ]; then
-  DISK_OPTS+=$(addMedia "$DRIVERS" "$FALLBACK" "1" "" "0x6")
-fi
-
-DISK1_FILE="/boot"
-if [ ! -f "$DISK1_FILE.img" ] || [ ! -s "$DISK1_FILE.img" ]; then
-  if [ ! -f "$DISK1_FILE.qcow2" ] || [ ! -s "$DISK1_FILE.qcow2" ]; then
-    DISK1_FILE="$STORAGE/${DISK_NAME}"
-  fi
+  DISK_OPTS+=$(addMedia "$DRIVERS" "$FALLBACK" "" "0x6")
 fi
 
+DISK1_FILE="$STORAGE/${DISK_NAME}"
 DISK2_FILE="/storage2/${DISK_NAME}2"
 DISK3_FILE="/storage3/${DISK_NAME}3"
 DISK4_FILE="/storage4/${DISK_NAME}4"
@@ -648,5 +650,4 @@ fi
 DISK_OPTS+=" -object iothread,id=io2"
 
 html "Initialized disks successfully..."
-
 return 0

src/install.sh

@@ -10,45 +10,42 @@ detectType() {
   [ ! -s "$file" ] && return 1
 
   case "${file,,}" in
-    *".iso" )
-
+    *".iso" | *".img" | *".raw" | *".qcow2" )
       BOOT="$file"
-      [ -n "${BOOT_MODE:-}" ] && return 0
+      [ -n "${BOOT_MODE:-}" ] && return 0 ;;
+    * ) return 1 ;;
+  esac
+
+  # Automaticly detect UEFI-compatible images
+
+  case "${file,,}" in
+    *".iso" )
 
-      # Automaticly detect UEFI-compatible ISO's
       dir=$(isoinfo -f -i "$file")
-      [ -z "$dir" ] && error "Failed to read ISO file, invalid format!" && BOOT="" && return 1
+      if [ -z "$dir" ]; then
+        BOOT="" 
+        error "Failed to read ISO file, invalid format!" && return 1
+      fi
 
       dir=$(echo "${dir^^}" | grep "^/EFI")
-      [ -n "$dir" ] && BOOT_MODE="uefi"
-      ;;
-
-    *".img" )
+      [ -n "$dir" ] && BOOT_MODE="uefi" ;;
 
-      DISK_NAME=$(basename "$file")
-      DISK_NAME="${DISK_NAME%.*}"
-      [ -n "${BOOT_MODE:-}" ] && return 0
+    *".img" | *".raw" )
 
-      # Automaticly detect UEFI-compatible images
       dir=$(sfdisk -l "$file")
-      [ -z "$dir" ] && error "Failed to read IMG file, invalid format!" && DISK_NAME="" && return 1
+      if [ -z "$dir" ]; then
+        BOOT="" 
+        error "Failed to read disk image file, invalid format!" && return 1
+      fi
 
       dir=$(echo "${dir^^}" | grep "EFI SYSTEM")
-      [ -n "$dir" ] && BOOT_MODE="uefi"
-      ;;
+      [ -n "$dir" ] && BOOT_MODE="uefi" ;;
 
     *".qcow2" )
 
-      DISK_NAME=$(basename "$file")
-      DISK_NAME="${DISK_NAME%.*}"
-      [ -n "${BOOT_MODE:-}" ] && return 0
-
       # TODO: Detect boot mode from partition table in image
-      BOOT_MODE="uefi"
-      ;;
+      BOOT_MODE="uefi" ;;
 
-    * )
-      return 1 ;;
   esac
 
   return 0
@@ -105,12 +102,13 @@ convertImage() {
   local source_fmt=$2
   local dst_file=$3
   local dst_fmt=$4
-  local dir base fs fa cur_size src_size space disk_param
+  local dir base fs fa space
+  local cur_size src_size disk_param
 
   [ -f "$dst_file" ] && error "Conversion failed, destination file $dst_file already exists?" && return 1
   [ ! -f "$source_file" ] && error "Conversion failed, source file $source_file does not exists?" && return 1
 
-  if [[ "$source_fmt" == "raw" ]] && [[ "$dst_fmt" == "raw" ]]; then
+  if [[ "${source_fmt,,}" == "${dst_fmt,,}" ]]; then
     mv -f "$source_file" "$dst_file"
     return 0
   fi
@@ -181,7 +179,6 @@ convertImage() {
   fi
 
   html "Conversion completed..."
-
   return 0
 }
 
@@ -199,6 +196,7 @@ findFile() {
 
 findFile "iso" && return 0
 findFile "img" && return 0
+findFile "raw" && return 0
 findFile "qcow2" && return 0
 
 if [ -z "$BOOT" ] || [[ "$BOOT" == *"example.com/image.iso" ]]; then
@@ -212,23 +210,24 @@ base=$(echo "$base" | sed -e 's/[^A-Za-z0-9._-]/_/g')
 
 case "${base,,}" in
 
-  *".iso" | *".img" | *".qcow2" )
+  *".iso" | *".img" | *".raw" | *".qcow2" )
 
     detectType "$STORAGE/$base" && return 0 ;;
 
-  *".raw" | *".vdi" | *".vmdk" | *".vhd" | *".vhdx" )
+  *".vdi" | *".vmdk" | *".vhd" | *".vhdx" )
 
     detectType "$STORAGE/${base%.*}.img" && return 0
     detectType "$STORAGE/${base%.*}.qcow2" && return 0 ;;
 
   *".gz" | *".gzip" | *".xz" | *".7z" | *".zip" | *".rar" | *".lzma" | *".bz" | *".bz2" )
 
     case "${base%.*}" in
-      *".iso" | *".img" | *".qcow2" )
+
+      *".iso" | *".img" | *".raw" | *".qcow2" )
 
         detectType "$STORAGE/${base%.*}" && return 0 ;;
 
-      *".raw" | *".vdi" | *".vmdk" | *".vhd" | *".vhdx" )
+      *".vdi" | *".vmdk" | *".vhd" | *".vhdx" )
 
         find="${base%.*}"
 
@@ -237,8 +236,7 @@ case "${base,,}" in
 
     esac ;;
 
-  * )
-    error "Unknown file format, extension \".${base/*./}\" is not recognized!" && exit 33 ;;
+  * ) error "Unknown file extension, type \".${base/*./}\" is not recognized!" && exit 33 ;;
 esac
 
 if ! downloadFile "$BOOT" "$base"; then
@@ -288,7 +286,7 @@ case "${base,,}" in
 esac
 
 case "${base,,}" in
-  *".iso" | *".img" | *".qcow2" )
+  *".iso" | *".img" | *".raw" | *".qcow2" )
     detectType "$STORAGE/$base" && return 0
     error "Cannot read file \"${base}\"" && exit 63 ;;
 esac
@@ -299,13 +297,11 @@ target_fmt="${DISK_FMT:-}"
 [[ "$target_fmt" != "raw" ]] && target_ext="qcow2"
 
 case "${base,,}" in
-  *".raw" ) source_fmt="raw" ;;
   *".vdi" ) source_fmt="vdi" ;;
-  *".vhd" ) source_fmt="vhd" ;;
+  *".vhd" ) source_fmt="vpc" ;;
+  *".vhdx" ) source_fmt="vpc" ;;
   *".vmdk" ) source_fmt="vmdk" ;;
-  *".vhdx" ) source_fmt="vhdx" ;;
-  * )
-    error "Unknown file format, extension \".${base/*./}\" is not recognized!" && exit 33 ;;
+  * ) error "Unknown file extension, type \".${base/*./}\" is not recognized!" && exit 33 ;;
 esac
 
 dst="$STORAGE/${base%.*}.$target_ext"

src/reset.sh

@@ -24,7 +24,7 @@ echo "❯ For support visit $SUPPORT"
 : "${RAM_SIZE:="1G"}"     # Maximum RAM amount
 : "${RAM_CHECK:="Y"}"     # Check available RAM
 : "${DISK_SIZE:="16G"}"   # Initial data disk size
-: "${BOOT_INDEX:="10"}"   # Boot index of CD drive
+: "${BOOT_INDEX:="9"}"    # Boot index of CD drive
 
 # Helper variables
 
@@ -83,17 +83,22 @@ echo
 
 # Check compatibilty
 
-if [[ "${FS,,}" == "btrfs" ]] && [[ "${SYS,,}" == *"-unraid"* ]]; then
-  warn "you are using BTRFS on Unraid, this might introduce issues!"
+if [[ "${FS,,}" == "ecryptfs" ]] || [[ "${FS,,}" == "tmpfs" ]]; then
+  DISK_IO="threads"
+  DISK_CACHE="writeback"
+fi
+
+if [[ "${BOOT_MODE:-}" == "windows"* ]]; then
+  if [[ "${FS,,}" == "btrfs" ]] && [[ "${SYS,,}" == *"-unraid"* ]]; then
+    warn "you are using BTRFS on Unraid, this might introduce issues!"
+  fi
 fi
 
 # Check memory
 
-if [[ "$RAM_CHECK" != [Nn]* ]]; then
-  if (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
-    error "Your configured RAM_SIZE of $WANTED_GB GB is too high for the $AVAIL_GB GB of memory available, please set a lower value."
-    exit 17
-  fi
+if [[ "$RAM_CHECK" != [Nn]* ]] && (( (RAM_WANTED + RAM_SPARE) > RAM_AVAIL )); then
+  error "Your configured RAM_SIZE of $WANTED_GB GB is too high for the $AVAIL_GB GB of memory available, please set a lower value."
+  exit 17
 fi
 
 # Helper functions
@@ -200,13 +205,14 @@ addPackage() {
 
 hasDisk() {
 
+  [ -b "/disk" ] && return 0
   [ -b "/disk1" ] && return 0
   [ -b "/dev/disk1" ] && return 0
-  [ -s "/boot.img" ]  && return 0
-  [ -s "/boot.qcow2" ] && return 0
   [ -b "${DEVICE:-}" ] && return 0
-  [ -s "$STORAGE/data.img" ]  && return 0
-  [ -s "$STORAGE/data.qcow2" ] && return 0
+
+  [ -z "${DISK_NAME:-}" ] && DISK_NAME="data"
+  [ -s "$STORAGE/$DISK_NAME.img" ]  && return 0
+  [ -s "$STORAGE/$DISK_NAME.qcow2" ] && return 0
 
   return 1
 }