Oven: adding OvenCavityOperationalState example

examples/all-clusters-app/all-clusters-common/all-clusters-app.matter

@@ -2592,6 +2592,72 @@ cluster BooleanState = 69 {
   readonly attribute int16u clusterRevision = 65533;
 }
 
+/** This cluster supports remotely monitoring and, where supported, changing the operational state of an Oven. */
+provisional cluster OvenCavityOperationalState = 72 {
+  revision 1;
+
+  enum ErrorStateEnum : enum8 {
+    kNoError = 0;
+    kUnableToStartOrResume = 1;
+    kUnableToCompleteOperation = 2;
+    kCommandInvalidInState = 3;
+  }
+
+  enum OperationalStateEnum : enum8 {
+    kStopped = 0;
+    kRunning = 1;
+    kPaused = 2;
+    kError = 3;
+  }
+
+  struct ErrorStateStruct {
+    enum8 errorStateID = 0;
+    optional char_string<64> errorStateLabel = 1;
+    optional char_string<64> errorStateDetails = 2;
+  }
+
+  struct OperationalStateStruct {
+    enum8 operationalStateID = 0;
+    optional char_string<64> operationalStateLabel = 1;
+  }
+
+  critical event OperationalError = 0 {
+    ErrorStateStruct errorState = 0;
+  }
+
+  info event OperationCompletion = 1 {
+    enum8 completionErrorCode = 0;
+    optional nullable elapsed_s totalOperationalTime = 1;
+    optional nullable elapsed_s pausedTime = 2;
+  }
+
+  readonly attribute nullable char_string phaseList[] = 0;
+  readonly attribute nullable int8u currentPhase = 1;
+  readonly attribute optional nullable elapsed_s countdownTime = 2;
+  readonly attribute OperationalStateStruct operationalStateList[] = 3;
+  readonly attribute OperationalStateEnum operationalState = 4;
+  readonly attribute ErrorStateStruct operationalError = 5;
+  readonly attribute command_id generatedCommandList[] = 65528;
+  readonly attribute command_id acceptedCommandList[] = 65529;
+  readonly attribute event_id eventList[] = 65530;
+  readonly attribute attrib_id attributeList[] = 65531;
+  readonly attribute bitmap32 featureMap = 65532;
+  readonly attribute int16u clusterRevision = 65533;
+
+  response struct OperationalCommandResponse = 4 {
+    ErrorStateStruct commandResponseState = 0;
+  }
+
+  /** Upon receipt, the device SHALL pause its operation if it is possible based on the current function of the server. */
+  command Pause(): OperationalCommandResponse = 0;
+  /** Upon receipt, the device SHALL stop its operation if it is at a position where it is safe to do so and/or permitted. */
+  command Stop(): OperationalCommandResponse = 1;
+  /** Upon receipt, the device SHALL start its operation if it is safe to do so and the device is in an operational state from which it can be started. */
+  command Start(): OperationalCommandResponse = 2;
+  /** Upon receipt, the device SHALL resume its operation from the point it was at when it received the Pause command, or from the point when it was paused by means outside of this cluster (for example by manual button press). */
+  command Resume(): OperationalCommandResponse = 3;
+}
+
 /** Attributes and commands for selecting a mode from a list of supported options. */
 provisional cluster OvenMode = 73 {
   revision 1;
@@ -7530,6 +7596,20 @@ endpoint 1 {
     ram      attribute clusterRevision default = 1;
   }
 
+  server cluster OvenCavityOperationalState {
+    callback attribute phaseList;
+    callback attribute currentPhase;
+    callback attribute operationalStateList;
+    callback attribute operationalState;
+    callback attribute operationalError;
+    callback attribute generatedCommandList;
+    callback attribute acceptedCommandList;
+    callback attribute eventList;
+    callback attribute attributeList;
+    ram      attribute featureMap default = 0;
+    ram      attribute clusterRevision default = 1;
+  }
+
   server cluster OvenMode {
     callback attribute supportedModes;
     ram      attribute currentMode;
@@ -8101,13 +8181,6 @@ endpoint 1 {
     ram      attribute clusterRevision default = 6;
 
     handle command SetpointRaiseLower;
-    handle command SetActiveScheduleRequest;
-    handle command SetActivePresetRequest;
-    handle command StartPresetsSchedulesEditRequest;
-    handle command CancelPresetsSchedulesEditRequest;
-    handle command CommitPresetsSchedulesRequest;
-    handle command CancelSetActivePresetRequest;
-    handle command SetTemperatureSetpointHoldPolicy;
   }
 
   server cluster FanControl {