Skip to content

A simple DIY status display with an 8x32 RGB LED panel implemented with esphome.io and Home Assistant

License

Notifications You must be signed in to change notification settings

popy2k14/EsphoMaTrix

 
 

Repository files navigation

EspHoMaTriX (ehmtx)

Very important information!!

Since esphome 2023.6.0 there are some problems in compiling !!!!

Important information

If you like my work, please donate me a star on GitHub and consider sponsoring me!!

Introduction

A simple DIY status display, built with a flexible 8x32 RGB LED panel implemented with esphome.io sample image

Take a look at the new version of the improved EspHoMaTriXv2!!!

There are some “RGB-matrix” status displays/clocks out there, the commercial one from LaMetric and some excellent DIY-alternatives.

  • LaMetric commercial ~ €199
  • Ulanzi TC001 commercial ~ €50
  • Awtrix (project has been discontinued after more than 4 years now in August 2022)
  • PixelIt (project is under active development)
  • Awtrix-Light From the developer of Awtrix, optimized for the Ulanzi TC001 Hardware The other DIY  solutions have their pros and cons. I tried some and used AwTrix for a long time. But the cons are so big (in my opinion) that I started an esphome.io variant targeted to an optimized Home Assistant integration. The main reason, for me, is the Home Assistant integration! There is a little hype around the Ulanzi TC001 pixel clock. This hardware can be used with EspHoMaTriX (with some limitations). You can connect the device and flash it via USB-C. As a starting point, you can use the UlanziTC001.yaml. Yet, the LDR and battery sensor are not perfectly supported. For another use of the hardware, see PixelIT_Ulanzi or AWTRIX-LIGHT firmware.

ehmtx in the media

See this German tutorial video with information on setting up your display RGB-LED Status Display für Home Assistant mit ESPHome | ESPHoMaTrix. Another german tutorial video focused at the Ulanzi Smarte Pixel Clock über Home Assistant steuern - Entitäten / Icons und mehr in der Ulanzi See this nice article about EsphoMaTrix on an Ulanzi TC001 from blakadder. Short video on Instagram @blak_adder https://www.instagram.com/reel/CpYVByRIaSI See these English discussions: Share your projects ESPHOME Or in German: Showroom

State

It is a working solution with core functionality coded. Advanced features, like automatic brightness control, can be done with esphome actions and automations. The possibilities are endless.

Features

Based on a 8x32 RGB flexible matrix, it displays a clock, the date and up to 24 other 'screens' provided by Home Assistant. Each screen (value/text) can be associated with a 8x8 bit RGB icon or GIF animation (see installation). The values/text can be updated or deleted from the display queue. Each screen has a lifetime, if not refreshed in its lifetime, it will disappear. When a screen is active, it is displayed so that the text can scroll twice (scroll_count) or even longer for screen_time seconds. You can use the fullfeature.yaml as a sample for an ESP8266. As mentioned, you have to edit to your needs. So check font, icons, board and the GPIO pins for your display. The file ulanziTC001.yaml uses the functions ehmtx provides, optimized for the Ulanzi Hardware. See it in action on YouTube (no sound but subtitles).

Installation

EsphoMaTrix custom component

EsphoMaTrix is a custom component, you have to include it in your YAML configuration. To always use the newest features, you should use the repo, to use a stable version you copy a working version to your esphome installation.

local use

If you download the components-folder from the repo and install it in your esphome you have a stable installation. But if there are new features, you won't see them. If needed, customize the YAML to your folder structure.

external_components:
   - source:
       type: local
       path: components # e.g. /config/esphome/components

use from repo

Use the GitHub repo as a component. Esphome refreshes the external components “only” once a day, perhaps you have to refresh it manually. In this mode, there may be breaking changes, so read the changelog and check the logs while installing the firmware.

external_components:
  - source:
      type: git
      url: https://github.com/lubeda/EsphoMaTrix
      ref: main # optional select a special branch or tag

Addressable_light component

The EsphoMaTrix component requires a 8x32 pixel addressable_light, it is referenced by the ID matrix_component. See the default options There are some different matrices-types on the market, to adapt them to EspHoMaTriX you have to find the proper pixel mapper. If there is garbage on your display, try the other pixel_mapper. Here are the most common types for flexible 8x32 matrices:

Type 1

under the display tag, specify this pixel mapper:

display:
  - platform: addressable_light
    .....
    pixel_mapper: |-
      if (x % 2 == 0) {
        return (x * 8) + y;
      }
      return (x * 8) + (7 - y);
    .....

Type 2 (e.g., Ulanzi TC001)

Under the display tag, specify this pixel mapper:

display:
  - platform: addressable_light
    .....
    pixel_mapper: |-
      if (y % 2 == 0) {
        return (y * 32) + x;
      }
      return (y * 32) + (31 - x);
    .....

You have to configure this lambda under the display: section to use the EsphoMaTrix component

display:
  - platform: addressable_light
    id: ehmtx_display
    .....
    auto_clear_enabled: true
    lambda: |-
      id(rgb8x32)->tick();
      id(rgb8x32)->draw();

Light component

The light component is used by the addressable_light component and referenced by ID under addressable_light_id:. To use the light component directly from home assistant, add the sample lambdason_turn_on and on_turn_off to the light component.

Sample

light:
  - platform: neopixelbus
    id: ehmtx_light
    ....
    on_turn_on:
      lambda: |-
         id(rgb8x32)->set_enabled(false);
    on_turn_off:
       lambda: |-
         id(rgb8x32)->set_enabled(true);

To hide the light component from home assistant use: internal: true

light:
  - platform: neopixelbus
    id: ehmtx_light
    internal: true
    ...

Time component

Since it is a clock, you need a time component, e.g., homeassistant. It is referenced by its ID under time_component: The display shows !t! until the time source is synchronized and valid.

Font

Download a small “pixel” TTF-font, I use "monobit.ttf". You can modify this font with FontForge and add on base of a E and so on. Due to copyright, I can't provide my modified version :-(. Not all fonts are suitable for this minimalistic display. There are public domain fonts which work well on the display, e.g., DMDSmall, details on alternative fonts are here. DarkPoet78 is providing special fonts for 8x32 matrices in his repo

font:
  - file: monobit.ttf
    id: EHMTX_font
    size: 16
    glyphs:  |
      !"%()+*=,-_.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz€@

Icons and Animations

Download and install all needed icons (.jpg/.png) and animations (.gif) under the ehmtx: key. All icons have to be 8x8 or 8x32 pixels in size. If necessary, scale them with gimp, check “as animation” for GIFs. You can also specify a URL to directly download the image file. The URLs will only be downloaded once at compile time, so there is no additional traffic on the hosting website. There are maximum 90 icons possible.

Sample

emhtx:
  icons:
    - id: boot
      file: icons/rocket.gif
      duration: 75    
    - id: temp
      file: temperature.png
    - id: yoga
      file: icons/yoga-bridge.gif
      pingpong: true
    - id: garage
      file: garage.gif
      duration: 100
    - id: homeassistant
      url: https://github.com/home-assistant/assets/raw/master/logo/logo-small.png     

The ID of the icons is used later to configure the screens to display. So, you should name them wisely. If you like to group icons, you should prefix them e.g., with "weather_" (see Service del_screen) The first defined icon will be used as a fallback icon, in case of an error, e.g., if you use a non-existing icon ID. GIFs are limited to 110 frames to limit the used amount of flash space. All other solutions provide ready-made icons, especially Lametric has a big database of icons. Please check the copyright of the icons you use. The maximum number of icons is limited to 90 in the code and also by the flash space and the RAM of your board. See also icon parameter

Configuration

ehmtx component

This component is highly customizable. Example

ehmtx:
  id: rgb8x32
  time_component: ehmtx_time
  matrix_component: ehmtx_display
  clock_time: 5    # seconds
  screen_time: 8   # seconds
  font_id: ehmtx_font
  show_dow: true   # day of week
  show_date: true  # also show the date
  icons2html: false # generate html with con overview
  brightness: 80 # percent
  time_format: "%H:%M"
  date_format: "%d.%m."
  week_start_monday: true # false equals sunday
  xoffset: 1
  yoffset: 2
  scroll_count: 2 # scroll long text at least two times
  scroll_interval: 80 # milliseconds
  frame_interval: 192 # milliseconds

Parameters

id (required, ID): Manually specify the ID used for code generation and in service definitions. clock_interval (optional, seconds): show the clock at least each x seconds, (default=60) clock_time (optional, seconds): duration to display the clock after this time, the date is displayed until next "show_screen". If show_date is false and clock_time > 0 the clock will be display as long as a normal screen! Setting clock_time to 0 will not show the clock or date. If there are no screens ind the queue, the display will be blank until the next screen is sent. timing screen_time (optional, seconds): default duration to display a screen or a clock/date sequence, a long text will be scrolled at least scroll_count times (default: 10 seconds). This may be overwritten by the add_screen service. hold_time (optional, seconds): extends the display time of the current screen in seconds (default=20). Used in services or automations, see hold_screen date_format (optional, string): formats the date display with strftime syntax, defaults "%d.%m." (use "%m.%d." for the US) show_seconds (optional, boolean): toggle an indicator for seconds while the clock is displayed (default: false)) time_format (optional, string): formats the date display with strftime syntax, defaults "%H:%M" (use "%I:%M%p" for the US) yoffset (optional, pixel): yoffset the text is aligned BASELINE_LEFT, the baseline defaults to 6 xoffset (optional, pixel): xoffset the text is aligned BASELINE_LEFT, the left defaults to 1 matrix_component (required, ID): ID of the addressable display show_dow (optional, bool): draw the day of week indicator on the bottom of the clock screen. Disable, e.g., if you want larger fonts, defaults to true. show_date (optional, bool): if true, show the date for screen_time - clock_time seconds, otherwise only shows the clock for screen_time seconds, defaults to true. time_component (required, ID): ID of the time component. The display shows !t! until the time source is valid. font (required, ID): ID of the font component week_start_monday (optional, bool): default Monday is first day of week, false => Sunday scroll_interval (optional, ms): the interval in ms to scroll the text (default=80), should be a multiple of the update_interval of the display frame_interval (optional, ms): the interval in ms to display the next animation/icon frame (default = 192), should be a multiple of the update_interval of the display. It can be overwritten per icon/gif, see icons parameter frame_duration icons2html (optional, boolean): If true, generate the HTML (filename.html) file to show all included icons.  (default = false) Example output: icon preview

icons

Parameters See icon details

  • frame_duration (optional, ms): in the case of a GIF file, the component tries to read the default interval for each frame. The default/fallback interval is 192 ms. In case you need to override the default value, set the duration per icon.
  • pingpong (optional, boolean): in the case of a GIF file, you can reverse the frames instead of starting from the first frame.
  • file (Exclusive, filename): a local filename
  • url (Exclusive, url): a URL to download the icon
  • lameid (Exclusive, number): the ID from the LaMetric icon database

Control your display

Plenty of the features are accessible with actions, you can use in your YAML

Local actions/lambdas

Show all icons on your matrix

This code shows all icons once on boot up, depending on the amount of your icons it can take a while to see them all.

esphome:
  ....
  on_boot:
    priority: -100
    # ...
    then:
      - lambda: !lambda |-
          id(rgb8x32)->show_all_icons();

Add screen to your display queue

You can add screens locally and display data directly from any local sensor. See this sample:

Lambda

Take care that the char text[30]; has enough space to store the formatted text.

sensor:
  - platform: bh1750
    id: sensorlx
    ...
    on_value:
      then:
        lambda: |-
          char text[30];
          sprintf(text,"Light: %2.1f lx", id(sensorlx).state);
          // 5 Minutes,each time at least 11 seconds,no alarm
           id(rgb8x32)->add_screen("sun", text, 5,11, false);
Action
sensor:
  - platform: bh1750
    id: sensorlx
    ...
    on_value:
      then:
        - ehtmx.add.screen
          id: rgb8x32
          icon_name: "sun"
          text: "new data from lux sensor"
          lifetime: 5 # minutes optional
          screen_time: 35 # seconds optional
          alarm: true # optional

Parameters

  • id (required, ID): ID of the ehmtx component
  • text (required, string): the text to display
  • icon_name (required, string): the name of the icon to display
  • lifetime (optional, int): the lifetime of the screen in minutes (default=5)
  • screen_time (optional, int): the display time of a screen per loop in seconds (default=10)
  • alarm (optional, bool): if alarm set true (default = false)

Set (alarm/clock/gauge/text/today/weekday) color action

Sets the color of the selected element

Lambda set text color
  lamda:
    id(rgb8x32)->set_text_color(200,45,12);
Action for set text color

You have to use the ID of your ehmtx component, e.g., rgb8x32

     - ehmtx.***.color:
        id: rgb8x32
        red: !lambda return r;
        green: !lambda return g;
        blue: !lambda return b;

valid elements:

  • ehmtx.alarm.color:
  • ehmtx.clock.color:
  • ehmtx.gauge.color:
  • ehmtx.text.color:
  • ehmtx.today.color:
  • ehmtx.weekday.color:
  • red, green, blue: the color components (0..255) (default = 80)

Set screen color action

Sets the color of the active screen in the queue, so it's best to use it directly after add_screen.

Lambda for set_screen
  lamda:
    id(rgb8x32)->set_screen_color("sun",200,45,12);

 

Action for set_screen

  You have to use the ID of your ehmtx component, e.g., rgb8x32  

     - ehmtx.screen.color:
        id: rgb8x32
        icon_name: sun
        red: !lambda return r;
        green: !lambda return g;
        blue: !lambda return b;

 

  • icon_name: name of the actual icon/screen
  • red, green, blue: the color components (0..255) (default = 80)  

 

Show date

  You can dynamically enable or disable the display of the date, see parameter show_date.  

    - ehmtx.show.date:
        id: rgb8x32
        flag: !lambda return true;

 

Show day of week

  You can dynamically enable or disable the display of the day of week, see parameter day_of_week.  

    - ehmtx.show.dayofweek:
        id: rgb8x32
        flag: !lambda return true;

 

Force screen

  Force the selected screen icon_name to be displayed next. Afterward, the loop continues from this screen. e.g., helpful for alarms. Or after an update of the value/text.  

    - ehmtx.force.screen:
        id: rgb8x32
        icon_name: !lambda return icon_name;

 

Change configuration during runtime

  Configuration variables/functions:   Experienced programmers can use these public methods:  

    void draw_day_of_week();
    void show_all_icons();
    void get_status();
    void skip_screen();
    void hold_screen();
    void set_screen_time(uint16_t t);
    void set_clock_time(uint16_t t);
    void set_hold_time(uint16_t t);
    void set_clock_interval(uint16_t t);
    void set_show_day_of_week(bool b);
    void set_show_seconds(bool b);
    void set_show_date(bool b);
    void set_brightness(int b); // int because of register_service!
    uint8_t get_brightness();
    void add_screen(std::string icon_name, std::string text, int lifetime, int show_time, bool alarm);
    void set_screen_color(std::string icon_name,int r, int g, int b);
    void del_screen(std::string icon_name);
    void set_frame_interval(uint16_t interval);
    void set_scroll_interval(uint16_t interval);
    void set_scroll_count(uint8_t count);
    void set_duration(uint8_t d);
    void set_indicator_off();
    void set_indicator_on(int r, int g, int b);
    void set_gauge_off();
    void set_gauge_value(int v); // valid: 0 - 100 int because of register_service
    void set_gauge_color(int r, int g, int b);
    void set_text_color(int r, int g, int b);
    void set_clock_color(int r, int g, int b);
    void set_today_color(int r, int g, int b);
    void set_weekday_color(int r, int g, int b);
    void set_alarm_color(int r, int g, int b);
    void draw_clock();
    void draw_gauge();
    void set_display_on();
    void set_display_off();

  Sample   You can set values during runtime, e.g., for a night mode  

# sample for ulanzi tc001
binary_sensor:
  - platform: gpio
    pin:
      number: $left_button_pin
      inverted: true
    on_press:
      - logger.log: "Clock on"
      - lambda:
          id(rgb8x32)->set_clock_time(6);
    name: "clock on"
  - platform: gpio
    pin:
      number: $right_button_pin
      inverted: true
   name: "Clock off"
    on_press:
      - logger.log: "clock off"
      - lambda:
          id(rgb8x32)->set_clock_time(0);

 

Local trigger

  To use the display without home assistant automations, you may use the advanced functionality with triggers. The triggers can be fired by sensors, time or by the ehmtx component.  

on_next_screen

There is a trigger available to do some local magic. The trigger on_next_screen is triggered every time a new screen is displayed (it doesn't trigger on the clock/date display!!). In lambda's you can use two local string variables:   x (Name of the icon, std::string): value to use in lambda   y (displayed text, std::string): value to use in lambda   See the examples:  

Write information to esphome log

 

ehmtx:
  ....
  on_next_screen:
    lambda: |-
        ESP_LOGD("TriggerTest","Iconname: %s",x.c_str());
        ESP_LOGI("TriggerTest","Text: %s",y.c_str());

 

Change the text color like crazy

 

ehmtx:
  ....
  on_next_screen:
    lambda: |-
      id(rgb8x32)->set_text_color(rand() % 255, rand() % 255, rand() % 255);

 

Send an event to Home Assistant

  To send data back to home assistant, you can use events.  

ehmtx:
  ....
  on_next_screen:
    - homeassistant.event:
        event: esphome.next_screen
        data_template:
          iconname: !lambda "return x.c_str();"
          text: !lambda "return y.c_str();"

  Result   events  

on_next_clock

The trigger on_next_clock is triggered every time a new clock display circle starts. See the examples:  

Change Clock colors like crazy for each clock circle

 

ehmtx:
  ....
  on_next_clock:
    lambda: |-
      id(rgb8x32)->set_clock_color(rand() % 255, rand() % 255, rand() % 255);
      id(rgb8x32)->set_weekday_color(rand() % 255, rand() % 255, rand() % 255);
      id(rgb8x32)->set_today_color(rand() % 255, rand() % 255, rand() % 255);

  Example  

api:
  services:
    - service: alarm
      variables:
        icon_name: string
        text: string
      then:
        lambda: |-
          id(rgb8x32)->add_screen(icon_name, text, 7,20, true); // 7 minutes lifetime/screen time 20 sec/alarm=true

  (D) Service brightness   Sets the overall brightness of the display (0..255)   parameters:  

  • brightness: from dark to bright (0..255) (default = 80) as set in the light component by color_correct: [30%, 30%, 30%]   There's an easier way, by using a number component:  
number:
  - platform: template
    name: "LED brightness"
    min_value: 0
    max_value: 255
    step: 1
    lambda: |-
      return id(rgb8x32)->get_brightness();
    set_action:
      lambda: |-
        id(rgb8x32)->set_brightness(x);

  Service screen (defined in YAML)   Queues a screen with an icon/animation and a text. There can only be one text per icon ID. If you need to show, e.g., an indoor and an outdoor temperature, you have to use different icon ID's!   You can update the text on the fly. If the screen is displayed, and you change the text for the icon, it will start a new lifetime (see lifetime) with the new text.   parameters:  

  • icon_name: The number of the predefined icons (see installation)
  • text: The text to be displayed   definition:
api:
  services:
    - service: screen
      variables:
        icon_name: string
        text: string
      then:
        - lambda: |-
            id(rgb8x32)->add_screen(icon_name,text,5,10,false);

  Service alarm (defined in YAML)   The alarm is like a regular screen, but it is displayed two minutes longer and has a red text color and a red marker in the upper-right corner.   parameters:  

  • icon_name: The name of the predefined icon ID (see installation)
  • text: The text to be displayed   definition:
api:
  services:
    - service: alarm
      variables:
        icon_name: string
        text: string
      then:
        - lambda: |-
            id(rgb8x32)->add_screen(icon_name,text,10,30,true);
            id(rgb8x32)->force_screen(icon_name);

  (D) Service del_screen   Removes a screen from the display by icon name. If this screen is actually displayed while sending this command, the screen will be displayed until its "show_screen"-time has ended.   optionally, you can suffix a "" to the icon name to perform a wildcard delete, which will delete all screens beginning with the icon_name specified.   For example, if you have multiple icons named weather_sunny, weather_rain & weather_cloudy, you can issue a del_screen weather_ to remove whichever screen is currently in a slot and replace it with a new weather screen.   parameters:  

  • icon_name: Icon id defined in the YAML (see installation)   (D) Service indicator_on / indicator_off   Turns indicator on/off   Display a colored corner on all screens and the clock. You can define the color by parameter.   parameters:  
  • r red in 0..255
  • g green in 0..255
  • b blue in 0..255   (D) Service alarm_color / clock_color / gauge_color / text_color / today_color / weekday_color   Set the color of the named text-type   parameters:  
  • r red in 0..255
  • g green in 0..255
  • b blue in 0..255   (D) Service display_on / display_off   Turns the display on or off   There's an easier way in using a switch component:   Sample  
switch:
  - platform: template
    name: "$devicename Display"
    icon: "mdi:power"
    restore_mode: ALWAYS_ON
    lambda: |-
      return id(rgb8x32)->show_display;
    turn_on_action:
      lambda: |-
        id(rgb8x32)->set_display_on();
    turn_off_action:
      lambda: |-
        id(rgb8x32)->set_display_off();

  Service skip_screen   If there is more than one screen in the queue, skip to the next screen.   e.g., on the Ulanzi TC001  

binary_sensor:
  - platform: gpio
    pin:
      number: $left_button_pin
      inverted: true
    on_press:
      lambda:
        id(rgb8x32)->skip_screen();

  Service hold_screen   Displays the current screen for a configured amount (see hold_time) (default=20) seconds longer.   e.g., on the Ulanzi TC001  

binary_sensor:
  - platform: gpio
    pin:
      number: $right_button_pin
      inverted: true
    on_press:
      lambda:
        id(rgb8x32)->hold_screen();

  (D) Service status   This service displays the running queue and a list of icons in the logs  

[13:10:10][I][EHMTX:175]: status status: 1  as: 1
[13:10:10][I][EHMTX:176]: status screen count: 3
[13:10:10][I][EHMTX:181]: status slot: 0 icon: 36  text: 47.9°C end: 400
[13:10:10][I][EHMTX:181]: status slot: 1 icon: 23  text: Supa langer Text end: 310
[13:10:10][I][EHMTX:181]: status slot: 2 icon: 1  text: 10.3°C end: 363
[13:10:10][I][EHMTX:186]: status icon: 0 name: boot
[13:10:10][I][EHMTX:186]: status icon: 1 name: temp
[13:10:10][I][EHMTX:186]: status icon: 2 name: garage
[13:10:10][I][EHMTX:186]: status icon: 3 name: wind
[13:10:10][I][EHMTX:186]: status icon: 4 name: rain

  (D) Service show_all_icons   Display all of your icons sequentially by ID.   Service gauge_value / gauge_off   (D) Turns gauge on/off Displays a colored gauge on the left side of the display. You can define the color by parameter.   parameters:  

  • percent gauge percentage  

Integration in Home Assistant

  To control your display, it has to be integrated in Home Assistant. Then it provides several services, all prefixed with the configured devicename e.g., "ehmtx". See the default services marked as (D) above, but you can add your own (see alarm and screen).  

Services

  All communication with Home Assistant use the home asistant API. The services can be provided by default or also defined additionally in the YAML. To define the additional services, you need the ID of the ehmtx-component e.g. id(rgb8x32).  

Overview of default services

  These services are the same as the local services, so you can adapt the documentation there     |name|parameter|   |----|----|   |get_status|none|   |set_display_on|none|   |set_display_off|none|   |show_all_icons|none|   |hold_screen|none|   |set_indicator_on| {"r", "g", "b"}|   |set_indicator_off|none|   |set_gauge_value| {"percent"}|   |set_gauge_off|none|   |set_alarm_color| {"r", "g", "b"}|   |set_text_color | {"r", "g", "b"}|   |set_clock_color| {"r", "g", "b"}|   |set_today_color| {"r", "g", "b"}|   |set_gauge_color| {"r", "g", "b"}|   |set_weekday_color |{"r", "g", "b"}|   |set_screen_color |{"icon_name","r", "g", "b"}|   |add_screen  |{"icon_name", "text", "lifetime","screen_time", "alarm"}|   |force_screen| {"icon_name"}|   |del_screen| {"icon_name"}|   |set_brightness| {"value"}|  

Use in Home Assistant automations

  The easiest way to use ehmtx as a status display is to use the icon names as trigger ID. In my example, I have an icon named “wind” when the sensor.wind_speed has a new state, this automation sends the new data to the screen with the icon named “wind” and so on.  

alias: EHMTX 8266 Test
description: ''
trigger:
  - platform: numeric_state
    entity_id: sensor.wind_speed
    id: wind
  - platform: state
    entity_id: sensor.actual_temperature
    id: temp
  - platform: state
    entity_id: sensor.wg_cover_device
    id: cover
condition: []
action:
  - service: esphome.ehmtx8266_screen
    data:
      icon_name: '{{trigger.id}}'
      text: >-
        {{trigger.to_state.state}}{{trigger.to_state.attributes.unit_of_measurement}}
mode: queued
max: 10

 

How to update

  Since version 2023.4.0 was a massive cleanup, you may have to check your YAML and your automations for all breaking changes.  

repairs

  sample repair   mostly, you have to check your automations if the service definitions have changed.  

compile errors

compile_error  

old name new name
display8x32 matrix_component
show_clock clock_time
show_screen screen_time
time time_component
html icons2html
 

  icon_error  

old name new name
duration frame_duration
 

  Old functions in YAML old_add_screen   old function style  

api:
  services:
    - service: alarm
      variables:
        icon_name: string
        text: string
      then:
        - lambda: |-
            id(rgb8x32)->add_screen(icon_name,text,7,true);
        - ehmtx.force.screen:
            icon_name: !lambda return icon_name;

the old add_screen function had 4 parameters, the new one has got 5.   correct code  

# Enable Home Assistant API
api: #!include ehmtx_service.yaml
  services:
    .....
      then:
        - lambda: |-
            id(rgb8x32)->add_screen(icon_name,text,7,30,true);
    .....   

old options

duration and select   Remove these entries.    

Display precision after home assistant 2023.3.0

  See templating for possibilities to optimize the output e.g. {{ states(sensor.solarpower, rounded=True) }} kWh  

Specific icons per condition

  Add an icon per weather condition to the ehmtx component  

  - id: weather_clear_night
      lameid: 52163
    - id: weather_cloudy
      lameid: 25991
    - id: weather_fog
      lameid: 52167
    ......

  Sample automation to show the weather with local temperature  

alias: EHMTX weather
description: weather with icon per condition
trigger:
  - platform: state
    entity_id: weather.metno
action:
  - service: esphome.ulanzi_del_screen
    data:
      icon_name: weather_*
  - service: esphome.ulanzi_screen
    data:
      icon_name: weather_{{ trigger.to_state.state }}
      text: >-
        {{ states("sensor.external_actual_temperature") }}°C

  or another sample automation for the trashcan type  

alias: "EHMTX Müllanzeige"
description: Anzeige welche Tonne raus muss. iconnamen gekürzt
trigger:
  - platform: time
    at:
      - "06:30"
      - "08:30"
      - "10:30"
      - "15:00"
      - "17:00"
      - "19:00"
condition:
  - condition: numeric_state
    entity_id: sensor.mulltrigger
    below: "3"
action:
  - service: esphome.ulanzi_del_screen
    data:
      icon_name: trash_*
  - data:
      icon_name: >-
        trash_{{ states("sensor.mulldetails") | replace("Biotonne",   "brow")|
        replace("Papiertonne","blue")| replace("Restmüll",   "grey")|
        replace("gelbe Tonne","yell|") | truncate(4,true,"")  }}    
      text: >-
        {{ states("sensor.mulldetails")|replace(" in","")|replace(" days","
        Tagen") | replace ("0 Tagen","heute") | replace ("1 Tagen","morgen")}}
      duration: 120
    service: esphome.ulanzi_screen
mode: single

  Prerequisites: This works since 2023.3.1 thanx to @andrew-codechimp for the new del_screen  

Integrate in Home Assistant UI

  Add entities to the Home Assistant UI for interactive control of your display  

Brightness

 

number:
  - platform: template
    name: "$devicename brightness"
    min_value: 0
    max_value: 255
    step: 1
    lambda: |-
      return id(rgb8x32)->get_brightness();
    set_action:
      lambda: |-
        id(rgb8x32)->set_brightness(x);

 

Display switch

 

switch:
  - platform: template
    name: "$devicename Display"
    icon: "mdi:power"
    restore_mode: ALWAYS_ON
    lambda: |-
      return id(rgb8x32)->show_display;
    turn_on_action:
      lambda: |-
        id(rgb8x32)->set_display_on();
    turn_off_action:
      lambda: |-
        id(rgb8x32)->set_display_off();

Buzzer, sound, buttons, and automatic brightness

  Awtrix and PixelIt have hard-coded functionality. EHMTX is also capable of building something like that by lambdas. But this is all your freedom.   Example: automatic brightness control with a bh1570 sensor  

sensor:
  - platform: bh1570
    # ...
    on_value:
      then:
         lambda: |- 
            if (x > 200)
            {
               id(rgb8x32)->set_brightness(50);
            } else {
               id(rgb8x32)->set_brightness(250);
            }

Notifier Custom Component

There is an optional notifier custom component you can install with HACS. It is comparable to the _screen service, but more streamlined.

Breaking changes

  • 2022.6.1 removed image types only rgb565 is valid!
  • 2023.2.0 removed awtrix icon awtrixid support
  • 2023.3.5 removed automatic scaling of images and animations
  • 2023.3.5 added status, display_on, display_off as default service => remove these from your YAML
  • 2023.3.5 added indicator_on/off as default services => remove these from your YAML
  • 2023.3.5 added *_color as default services => remove these from your YAML
  • 2023.3.5 added show_all_icons, gauge_percent/gauge_off as default services => remove these from your YAML
  • 2023.4.0 cleaner naming, please check all automations and YAML for change naming!!!
  • 2023.4.0 removed the select component

Usage

The integration works with the Home Assistant API so, after boot of the device, it takes a few seconds until the service calls start working.

Disclaimer

THE SOFTWARE IS PROVIDED "AS IS", use at your own risk!

Thanks

  • blakadder for his contribution (cleanup README.md, fixed sample)
  • andrew-codechimp for his contribution (display on/off & del_screen "*" & show_clock with 0)
  • jd1 for his contributions
  • aptonline for his work on the ulanzi hardware
  • wsbtak for the work on the ulanzi hardware
  • ofirsnb for his contributions
  • darkpoet78 for his work on optimized fonts
  • dennisse Auto-brightness for the Ulanzi
  • everbody that found bugs/issues and reported them!

Special thanks to all sponsors

About

A simple DIY status display with an 8x32 RGB LED panel implemented with esphome.io and Home Assistant

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 63.9%
  • Python 36.1%