ci: Add gitlint and document commit conventions

* Add gitlint to pre-commit setup
* Update pre-commit setup for installing commit-hooks
* Add "Commit Conventions" contributing docs

.gitlint

@@ -0,0 +1,138 @@
+# Edit this file as you like.
+#
+# All these sections are optional. Each section with the exception of [general] represents
+# one rule and each key in it is an option for that specific rule.
+#
+# Rules and sections can be referenced by their full name or by id. For example
+# section "[body-max-line-length]" could also be written as "[B1]". Full section names are
+# used in here for clarity.
+#
+[general]
+# Ignore certain rules, this example uses both full name and id
+# ignore=title-trailing-punctuation, T3
+
+# verbosity should be a value between 1 and 3, the commandline -v flags take precedence over this
+# verbosity = 2
+
+# By default gitlint will ignore merge, revert, fixup, fixup=amend, and squash commits.
+# ignore-merge-commits=true
+# ignore-revert-commits=true
+# ignore-fixup-commits=true
+# ignore-fixup-amend-commits=true
+# ignore-squash-commits=true
+
+# Ignore any data sent to gitlint via stdin
+# ignore-stdin=true
+
+# Fetch additional meta-data from the local repository when manually passing a
+# commit message to gitlint via stdin or --commit-msg. Disabled by default.
+# staged=true
+
+# Hard fail when the target commit range is empty. Note that gitlint will
+# already fail by default on invalid commit ranges. This option is specifically
+# to tell gitlint to fail on *valid but empty* commit ranges.
+# Disabled by default.
+# fail-without-commits=true
+
+# Whether to use Python `search` instead of `match` semantics in rules that use
+# regexes. Context: https://github.com/jorisroovers/gitlint/issues/254
+# Disabled by default, but will be enabled by default in the future.
+# regex-style-search=true
+
+# Enable debug mode (prints more output). Disabled by default.
+# debug=true
+
+# Enable community contributed rules
+# See http://jorisroovers.github.io/gitlint/contrib_rules for details
+contrib=contrib-title-conventional-commits,CT1,contrib-disallow-cleanup-commits,CC2
+
+# Set the extra-path where gitlint will search for user defined rules
+# See http://jorisroovers.github.io/gitlint/user_defined_rules for details
+# extra-path=examples/
+
+[title-max-length]
+line-length=80
+
+# Conversely, you can also enforce minimal length of a title with the
+# "title-min-length" rule:
+# [title-min-length]
+# min-length=5
+
+# [title-must-not-contain-word]
+# Comma-separated list of words that should not occur in the title. Matching is case
+# insensitive. It's fine if the keyword occurs as part of a larger word (so "WIPING"
+# will not cause a violation, but "WIP: my title" will.
+# words=wip
+
+# [title-match-regex]
+# python-style regex that the commit-msg title must match
+# Note that the regex can contradict with other rules if not used correctly
+# (e.g. title-must-not-contain-word).
+# regex=^US[0-9]*
+
+# [body-max-line-length]
+# line-length=72
+
+# [body-min-length]
+# min-length=5
+
+# [body-is-missing]
+# Whether to ignore this rule on merge commits (which typically only have a title)
+# default = True
+# ignore-merge-commits=false
+
+# [body-changed-file-mention]
+# List of files that need to be explicitly mentioned in the body when they are changed
+# This is useful for when developers often erroneously edit certain files or git submodules.
+# By specifying this rule, developers can only change the file when they explicitly reference
+# it in the commit message.
+# files=gitlint-core/gitlint/rules.py,README.md
+
+# [body-match-regex]
+# python-style regex that the commit-msg body must match.
+# E.g. body must end in My-Commit-Tag: foo
+# regex=My-Commit-Tag: foo$
+
+# [author-valid-email]
+# python-style regex that the commit author email address must match.
+# For example, use the following regex if you only want to allow email addresses from foo.com
+# regex=[^@][email protected]
+
+# [ignore-by-title]
+# Ignore certain rules for commits of which the title matches a regex
+# E.g. Match commit titles that start with "Release"
+# regex=^Release(.*)
+
+# Ignore certain rules, you can reference them by their id or by their full name
+# Use 'all' to ignore all rules
+# ignore=T1,body-min-length
+
+# [ignore-by-body]
+# Ignore certain rules for commits of which the body has a line that matches a regex
+# E.g. Match bodies that have a line that that contain "release"
+# regex=(.*)release(.*)
+#
+# Ignore certain rules, you can reference them by their id or by their full name
+# Use 'all' to ignore all rules
+# ignore=T1,body-min-length
+
+# [ignore-body-lines]
+# Ignore certain lines in a commit body that match a regex.
+# E.g. Ignore all lines that start with 'Co-Authored-By'
+# regex=^Co-Authored-By
+
+# [ignore-by-author-name]
+# Ignore certain rules for commits of which the author name matches a regex
+# E.g. Match commits made by dependabot
+# regex=(.*)dependabot(.*)
+#
+# Ignore certain rules, you can reference them by their id or by their full name
+# Use 'all' to ignore all rules
+# ignore=T1,body-min-length
+
+# This is a contrib rule - a community contributed rule. These are disabled by default.
+# You need to explicitly enable them one-by-one by adding them to the "contrib" option
+# under [general] section above.
+# [contrib-title-conventional-commits]
+# Specify allowed commit types. For details see: https://www.conventionalcommits.org/
+# types = bugfix,user-story,epic

.pre-commit-config.yaml

@@ -4,7 +4,7 @@ repos:
     rev: v1.5.1
     hooks:
       - id: remove-tabs
-        exclude: "vendor-prefixes\\.txt$"
+        exclude: "vendor-prefixes\\.txt$|.git/COMMIT_EDITMSG"
   - repo: https://github.com/pre-commit/mirrors-clang-format
     rev: v18.1.8
     hooks:
@@ -16,9 +16,14 @@ repos:
     rev: v2.7.1
     hooks:
       - id: prettier
+        exclude: ".git/COMMIT_EDITMSG"
         # Workaround for https://github.com/pre-commit/mirrors-prettier/issues/29
         additional_dependencies:
           - [email protected]
+  - repo: https://github.com/jorisroovers/gitlint
+    rev: v0.19.1
+    hooks:
+      - id: gitlint
   - repo: https://github.com/pre-commit/pre-commit-hooks
     rev: v4.4.0
     hooks:

docs/docs/development/contributing/commit-messages.md

@@ -0,0 +1,68 @@
+---
+title: Commit Messages
+---
+
+The ZMK project uses [conventional commits](https://www.conventionalcommits.org/) for their commit messages. This not only provides consistency for our commits, but also allows for release/versioning automation to determine the next version to release, generating changelogs, etc.
+
+Commit messages will be checked as part of our CI process by GitHub Actions.
+
+## Guidelines
+
+Commits should have the following:
+
+- A first line prefix that includes a [type](#types), as well as appropriate [scope](#scopes) as needed
+- Following the prefix, a concise summary of the change, which documents the new behavior/feature/functionality in the positive (e.g. "wake from sleep now works with charlieplex kscan", not "fixed waked from sleep bug with charlieplex kscan driver")
+- A blank line following the first line.
+- A body that provides more detail of the changes. This MAY be a bulleted list or paragraph prose.
+- An optional set of [git trailers](https://git-scm.com/docs/git-interpret-trailers#_description) for things like [GitHub keywords](https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests) following a blank line.
+
+## Example
+
+Here is an example good commit message:
+
+```
+feat(boards): Add numpad layouts
+
+Added physical layouts for the following variants of numpads:
+
+- With and without extra top row
+- 2U plus key or 1U plus and backspace keys
+- 2U 0 key or 1U 0 and 00 keys
+- Full 1U grid/macropad layout
+
+Other layouts exist, such as "southpaw" horizontally mirrored layouts,
+and layouts with a fifth column, but those seem to be much less common.
+```
+
+## Pre-Commit
+
+To help make sure you don't need to wait for GitHub Actions to check your commits, you can [set up pre-commit](../local-toolchain/pre-commit.md) to check your commits as you create them.
+
+## Types
+
+The following commit types are used by ZMK:
+
+- `docs:` - changes to our documentation found in the `docs/` directory.
+- `feat:` - changes that add a new feature
+- `fix:` - changes that fix existing functionality
+- `refactor:` - changes that refactor existing functionality without adding any new features
+- `feat!:`/`refactor!:`/`fix!` - same as above, but indicate a breaking change.
+- `ci:` - changes to our continuous integration setup with GitHub Actions, usually only for the files in `.github/workflows/`.
+- `chore:` - grab bag type for small changes that don't fall into any of the above categories.
+
+## Scopes
+
+The following scopes are frequently used to further clarify the scope of the change:
+
+- `hid` - changes to our general HID code
+- `usb` - changes specific to USB
+- `ble` - changes specific to BLE
+- `power` - changes to our power management code
+- `split` - changes to our split keyboard support
+- `studio` - changes to our ZMK Studio code
+- `display` - changes to to our display code
+- `underglow` - changes to to our RGB underglow support
+- `behaviors` - changes to to our core behavior code
+- `core` - changes to any other area of our core code
+- `boards` - changes to the in-tree boards
+- `shields` - changes to the in-tree shields

docs/docs/development/local-toolchain/pre-commit.md

@@ -22,12 +22,14 @@ Now that pre-commit is installed on your PC, you need to install it into the ZMK
 
 ```bash
 pre-commit install
+pre-commit install --hook-type commit-msg
 ```
 
 This should print a message such as
 
 ```
-pre-commit installed at .git\hooks\pre-commit
+pre-commit installed at .git/hooks/pre-commit
+pre-commit installed at .git/hooks/commit-msg
 ```
 
 Pre-commit will now automatically check your changes whenever you run `git commit`. If it detects a problem, it will describe the problem and cancel the commit. For simple problems such as incorrect formatting, it will also automatically fix the files so you can just `git add` them and try again.

docs/sidebars.js

@@ -142,6 +142,7 @@ module.exports = {
           collapsed: true,
           items: [
             "development/contributing/clean-room",
+            "development/contributing/commit-messages",
             "development/contributing/documentation",
           ],
         },