Skip to content

opensciencegrid/osg-test

Repository files navigation

osg-test

Build Status

The osg-test package contains software that performs automated, functional integration tests an OSG Software installation. osg-test acts as the driver for the OSG Software's in the nightly VM tests.

Motivation

Test Framework

Why should we consider using a different test framework than other people? Most automated testing frameworks (many, if not most, based on the venerable JUnit) support tests that are mostly independent of each other and consequently can be run in any order. Because we are doing integration tests, ours are necessarily more coupled than that. For example, testing globus-job-run requires that the appropriate RPMs are installed, a test user is created and set up with a certificate, the gatekeeper service is configured and running, and so forth. And then, when tests are done, we want to stop services and remove packages. We want to express all of these steps as tests, because they are all things that could fail as a result of our packaging and hence are part of the system under test.

Other testing frameworks often support fixtures, which bracket a set of tests with set-up and tear-down code. While this feature sounds promising, typically it has the wrong semantics for our use cases. Generally, we want to install, configure, and start a set of services once, then run many tests that use the services, then stop and remove them. The start-up costs are often high; for example, our VOMS setup takes roughly 40 seconds to configure and start, not counting installation time. The problem is that test fixtures are usually applied per test, with the idea that each test needs a clean environment in which to run.

Design Requirements

  • Each test, or perhaps group of related tests, has dependencies that must be met. If they are not met at run time, then the test(s) should be skipped (and reported as such). There seem to be two classes of dependencies. Sequence dependencies define a DAG of tests, such that some test(s) must occur before others. This static information is used by the test framework to topologically sort the tests into a valid sequence. State dependencies define what state the system must be in for the test(s) to run. For example, a test may require a service to be running. If the prior test that starts the service fails, then the service is marked as not running, and the dependent test is skipped. State dependencies include information about which packages are installed.
  • Framework should be as minimal as possible and (ideally) unaware of our specific contents.
  • Atomic unit of work is a test.
  • All operations are expressed as tests, including installation, configuration, service start/stop, etc.
  • Tests should express requirements clearly and simply, so that distributed team of developers can work independently and with minimal confusion.

Installation

To install osg-test, run the following commands as root:

git clone --recursive [email protected]:opensciencegrid/osg-test.git
cd osg-test
make install
cd osg-ca-generator
make install

Running the OSG Automated Tests

WARNING! The tests and associated test framework run as root and may destroy your system! It is strongly recommended that osg-test be run only on “disposable” systems — ones that can be reimaged or reinstalled from scratch with little effort. Virtual machines are ideal for this kind of test.

Run the tests (see below for options). Be sure to direct the stdout/stderr to a file to get all the information from the test run (the dump-file option only outputs some of the output to a file):

osg-test -vadi <PACKAGE> -r osg-testing > <output file> 2>&1

osg-test Script Usage

Fundamentally, the osg-test script runs tests and reports on their results. However, the script can also perform many of the housekeeping tasks associated with setting up and tearing down the test environment, including adding (and later removing) a test user and its X.509 certificate, installing (and later removing) one or more RPMs, and so on. The following options are available:

Option Description
-a, --add-user Add and configure the test user account (see also -u below). By default, the script assumes that the test user account already exists and is configured with a valid X.509 certificate in its .globus directory.
-c, --config FILE Configuration file to use that specifies command-line options. See below for syntax
-d, --dump-output After all test output, print all commands and their output from the test run. Typically generates a lot of output.
--df, --dump-file FILE Like --dump-output, but prints the output to a file instead of the console
-e, --exit-on-fail Stop tests on first failure and output the results
-g, --update-repo REPO Enable the given repository when using yum to update packages. Use actual repo names, such as osg-testing and osg-development.
-i, --install PACKAGE Before running tests, use yum to install the given package; may be specified more than once to install more than one top-level package. By default, the script assumes that the user has installed all packages to be tested in advance.
-m, --manual-run Speeds up osg-test in the case where it is run by hand. May not be suitable when running multiple instances of osg-test at once.
-n, --no-cleanup Do not run clean-up steps. Opposite of --cleanup
-p, --password PASSWORD Password for the grid certificate of the test user. Defaults to the password that works with the X.509 certificate for the default test user.
-s, --securepass Prompt for the password instead of specifying it in the command line.
-r, --extra-repo REPO Enable the given extra repository (in addition to production) when using yum to install packages. Use actual repo names, such as osg-testing and osg-development. Can be used multiple times with different repositories.
--update-release RELEASE OSG release version (e.g. 3.2) to use when updating packages specified with -i.
--tarballs Test client tarballs instead of RPM-based installation.
--tarball-test-dir The location of the tarball test files (if non-standard).
--no-print-test-name Do not print test name before command output
--hostcert Create host cert
-T, --no-tests Skip running the tests themselves. Useful for running/testing just the set-up and/or clean-up steps.
-u, --test-user USERNAME Use the test user account with the given name. See also the -a and -p options.
-v, --verbose Print the name of each test as it is run; generally a good idea.
-h, --help Print usage information and exit.
--version Print the script version and exit.

Config file syntax

Unfortunately, the names of the variables in the config file are not the same as their names on the command line. Below is a translation table and an example config file.

Command-Line Config File Default Value
--add-user adduser False
--dump-output dumpout False
--dump-file dumpfile None
--extra-repo extrarepos []
--exit-on-fail exitonfail False
--update-repo updaterepos []
--install packages []
--manual-run manualrun False
--no-cleanup skip_cleanup False
--no-print-test-name printtest False
--password password vdttest
--securepass securepass False
--update-release updaterelease None
--tarballs tarballs False
--no-tests skiptests False
--test-user username vdttest
--verbose verbose False
backupmysql False
hostcert False
nightly False
selinux False

Example configuration file:

[Config]
adduser=True
dumpout=True
dumpfile=/tmp/dumpfile
updaterepos=osg-development,osg-upcoming-development
packages=osg-gums,osg-voms
skip_cleanup=False
password=test
extrarepos=osg-testing,osg-prerelease
tarballs=False
skiptests=False
username=user
verbose=True

Writing Tests

All of the OSG Software automated tests are located in the osg-test software and package.

The software itself is in GitHub repository at https://github.com/opensciencegrid/osg-test; current code is kept in the master branch.

The software package is defined in our Subversion repository at native/redhat/trunk/osg-test.

Directory Organization

The test software is written in Python and consists of:

  • A driver program, osg-test
  • A set of support libraries (Python modules) in osgtest/library
  • The tests themselves (also Python modules) in osgtest/tests
  • Extra files needed at runtime in files

The whole system uses the standard Python unittest framework to run.

Test Sequence

During a test run, the test modules are run in sequence as follows:

File When Purpose
special_user.py Tests not suppressed, or explicitly requested Add user (if asked), Check user, Set up mapfile
special_install.py Packages given Check repositories, Clean yum cache, Install packages
test_NNN_*.py Tests not suppressed Configure, Test, Tear down
special_cleanup.py Explicitly requested Remove user (if added), Remove packages (if installed)

The test_* modules are organized roughly into three phases, based on the sequence number of the file:

Test Files Purpose
test_[000-299]_* Set up
test_[300-699]_* Tests
test_[700-999]_* Tear down

Coding Tips

It is important to know the basics of the Python unittest module; read the documentation for it. We build on top of the unittest module, by providing an osgunittest module that inherits from it.

Basic Structure of a Test Module

Each test module must import the osgunittest library, plus whichever of the osg-test libraries are needed (conventionally with shortened aliases):

import osgunittest

import osgtest.library.core as core
import osgtest.library.files as files

Then, a single test class is defined, deriving from osgunittest.OSGTestCase; the individual tests are sequentially numbered functions within the class:

class TestFooBarBaz(osgunittest.OSGTestCase):

    def test_01_first_thing(self):
        # test stuff!

    def test_02_more(self):
        # test stuff!

    # Tests return (success) or raise (failure)

Test Assertions

Within each test function, use the TestCase object functions to assert things that should be true:

def test_99_example(self):
     result = do_something()
     self.assert_(result > 42, 'result too low')
     self.assertEqual(result, 57, 'result ok')

Be sure to learn and use all of the assertion functions, for greatest expressive power and clarity! For example, there are also:

  • assertNotEqual(first, second[, message])
  • assertRaises(exception, callable, …)

Skipping Tests

There are two cases in which a test should be skipped, and they have different semantics in osgunittest:

  1. If the packages they depend on are not installed. This is called an OkSkip, since it does not indicate any sort of error.
  2. If the packages they depend on are installed, but required services were unavailable. This is called a BadSkip, since it indicates a cascading failure -- an error in a previous step that is causing problems in the current step.

One of the extensions that osgunittest adds to unittest is the ability to report on these kinds of failures.

The following osgunittest methods cause the test to be skipped with an OkSkip ( OkSkipException ):

  • skip_ok([message=None]):
    • skip, with optional message
  • skip_ok_if(expr, [message=None]):
    • skip if expr is True, with optional message
  • skip_ok_unless(expr, [message=None]):
    • skip if expr is False, with optional message

And the following osgunittest methods cause the test to be skipped with a BadSkip ( BadSkipException ):

  • skip_bad([message=None]):
    • skip, with optional message
  • skip_bad_if(expr, [message=None]):
    • skip if expr is True, with optional message
  • skip_bad_unless(expr, [message=None]):
    • skip if expr is False, with optional message

Note that the OkSkip methods are often not directly used, and convenience functions in osgtest.core are used instead.

Skipping Due to Missing Packages (OkSkip)

The following two patterns are used for skipping tests due to missing packages; use the simplest one for your case (or follow conventions of other tests):

Example 1: A single package with custom skip message

def test_01_start_condor(self):
    core.skip_ok_unless_installed('condor',
                                  message='HTCondor not installed')

Example 2: A normal check of several packages at once:

def test_02_condor_job(self):
    core.skip_ok_unless_installed('globus-gram-job-manager-condor',
                                  'globus-gram-client-tools',
                                  'globus-proxy-utils')

Note that old unit test code might be using the methods core.rpm_is_installed() or core.missing_rpm() for this purpose. These just printed a message if the test was to be skipped, but the test writer had to actually perform the skip manually.

The following patterns should be converted to match the first and second example, respectively:

Old Example 1:

if not core.rpm_is_installed('condor'): # OLD CODE
    core.skip('not installed')
    return

Old Example 2:

if core.missing_rpm('globus-gram-job-manager-condor', # OLD CODE
                    'globus-gram-client-tools',
                    'globus-proxy-utils'):
    return

Note: Add skip tests to all functions that depend on a particular package, not just the first one within a test module.

Skipping Due to Failure in Required Service (BadSkip)

Tests often require a service to be up and running. If the service is not running, then it is expected that the test will fail through no fault of the component being tested. These cascading failures often mask the root cause of the problem. In order to avoid that, we instead skip the test, and mark it as having been skipped due to a previous failure (a BadSkip). Note that these should be raised only after making sure the service has been installed.

The following examples show how this is done:

core.skip_ok_unless_installed('globus-gram-job-manager-condor')
self.skip_bad_unless(core.state['condor.running-service'], message='HTCondor service not running')
core.skip_ok_unless_installed( 'globus-gram-job-manager-pbs',
                               'globus-gram-client-tools',
                               'globus-proxy-utils',
                               'globus-gram-job-manager-pbs-setup-seg')

if (not core.state['torque.pbs-configured'] or
    not core.state['torque.pbs-mom-running'] or
    not core.state['torque.pbs-server-running'] or
    not core.state['globus.pbs_configured']):

    self.skip_bad('pbs not running or configured')

Note: Add skip tests to all functions that depend on a particular service, not just the first one within a test module.

Running System Commands

Most tests run commands on the system; this is the nature of our testing environment. Thus, the test libraries have extra support for running system commands. Use these functions! Do not reinvent the wheel.

See the PyDoc for the core library for full documentation on the functions. Below are examples.

The basic system-call pattern:

def test_99_made_up_example(self):
    command = ('/usr/bin/id','-u')
    status, stdout, stderr = core.system(command, True)
    fail = core.diagnose('id of test user', status, stdout, stderr)
    self.assertEqual(status, 0, fail) # Maybe more checks and assertions

In the most common case, you run the core.system() function, check its exit status against 0, and then possibly test its stdout and stderr for problems. There is a helper function for this common case:

def test_01_web100clt(self):
    if core.missing_rpm('ndt'):
        return
    command = ('web100clt', '-v')
    stdout, stderr, fail = core.check_system(command, 'NDT client')
    result = re.search('ndt.+version', stdout, re.IGNORECASE)
    self.assert_(result is not None)

Configuration and State

The test framework does not automatically preserve values across test modules, so you must do so yourself if needed. But, the test library does provide standard mechanisms for saving configuration values and system state.

Store all cross-module configuration values in core.config (a dictionary):

def test_04_config_voms(self):
    core.config['voms.vo'] = 'osgtestvo'
    # ...

Record cross-module state values in core.state (a dictionary):

def test_01_start_mysqld(self):
    core.state['mysql.started-server'] = False
    # Try to start MySQL service, raise on fail
    core.state['mysql.started-server'] = True

Module-Wide Setup and Teardown

Sometimes a module needs certain operations to be done for setting up tests. For example, the tests for osg-configure involve importing the unit test modules provided by osg-configure itself, and need to add an entry to sys.path. This kind of setup should be put inside the test class; it will not get reliably run if it is only inside the module. Making separate test functions for the setup and teardown steps (named, for example, test_00_setup and test_99_teardown) is a good way of handling this.

Testing your changes

Before you go and commit your changes, it's a good idea to make sure they don't break everything. Our nightlies run tests against the master version of osg-test so to avoid the embarassment of everyone knowing that your code is broken, you'll want to make sure your tests work!

Fermicloud VMs

  1. Start a fermicloud VM and install the OSG RPMs, the latest build of osg-test and osg-tested-internal.
  2. Get rid of the old tests:
    # For RHEL 6, CentOS 6, and SL6
    [root@client ~]$ rm -rf /usr/lib/python2.6/site-packages/osgtest
    # For RHEL 7, CentOS 7, and SL7
    [root@client ~]$ rm -rf /usr/lib/python2.7/site-packages/osgtest
    
  3. cd into your clone of the osg-test repo and copy over your tests to your VM:
    # For RHEL 6, CentOS 6, and SL6 VMs
    [user@client ~]$ scp -r osgtest/ <VM HOSTNAME>:/usr/lib/python2.6/site-packages
    # For RHEL 7, CentOS 7, and SL7 VMs
    [user@client ~]$ scp -r osgtest/ <VM HOSTNAME>:/usr/lib/python2.7/site-packages
    
  4. Run the tests and monitor their output:
    [root@client ~]$ osg-test -vad > <OUTFILE> 2>&1 &
    [root@client ~]$ tail -f <OUTFILE>
    

VM Universe

It's a good idea to test your changes in the VM Universe if you've made big changes like adding tests or changing entire test modules. Otherwise, you can go ahead and skip this step.

  1. SSH to osghost.chtc.wisc.edu
  2. Prepare a test run:
    [user@client ~]$ osg-run-tests -sl <TEST COMMENT>
    
  3. cd into the directory that is indicated by the output of osg-run-tests
  4. Run git diff master from your clone of the osg-test repo to get the changes that you're interested in and fill test-changes.patch with these changes.
  5. Edit test-parameters.yaml so that the sources section reads:
    sources:
       - opensciencegrid:master; 3.3; osg-testing
    
  6. Start the tests:
    [user@client ~]$ condor_submit_dag master-run.dag