Skip to content

PRRTE v3.0.0
Compare
Choose a tag to compare
@rhc54 rhc54 released this 13 Nov 15:14
· 479 commits to master since this release
v3.0.0
5644a70
This commit was signed with the committer’s verified signature.
rhc54 Ralph Castain
GPG key ID: 07C041408F221846
Learn about vigilant mode.

This is the latest production release of the PRRTE software system. It
contains full support of the PMIx v4.2 Standard plus extensions as provided
by OpenPMIx v4.2. It requires support from the OpenPMIx v4.2.2 release or above.

**** NOTE: This release represents a major update to the PRRTE
code base from prior releases. Many of the changes will be
transparent to the user. However, there are a few key areas that
may (likely) impact users. These include:

  • changes to the cmd line interpreter. PRRTE has provided an
    abstraction layer that allows programming library developers
    and environment vendors to customize the cmd line of PRRTE
    binaries (e.g., prterun and prun). This is governed by the
    detection of a "personality" that is to be used for defining
    the cmd line options. The personality can be set either directly
    on the cmd line itself (via the "--personality foo" option) or
    is detected by PRRTE thru the environment.
  • a more extensive "--help" support system.
  • reduction in the "--rank-by" options.
  • addition of new "--output", "--display", and "--runtime-options"
    command line directives
  • removal of the "mindist" mapper due to lack of a maintainer
  • remove of man pages for PRRTE tools - this has been replaced
    with a hierarchical help system. Thus, the command "prun --help"
    will output the former man page for the prun command. Users
    can then access more detailed help on any command line option
    by simply adding it to the help command - i.e., "prun --help "
    There are quite a few more changes than listed here, but they mostly
    pertain to code internals. However, these dictate that PRRTE v3.0.0
    require use of PMIx v4.2.2 or above to compile. Note that this doesn't
    impact the PMIx level associated with any applications executed by
    PRRTE - the only requirement is that applications link against a
    PMIx version that meets the PMIx cross-version requirements (i.e., a
    minimum of PMIx v2.5).

Detailed changes:

PR #1591: Multiple commits

  • fix conflict
  • remove unused vars in tools area
  • adjust prterun to prefix ns: for dvm option
  • Cleanup the --dvm option a bit
  • Some more minor cleanups of --dvm

PR #1586: Multiple commits

  • Extend PBS allocation detection to cover Cobalt
  • Broaden ability to require PRRTE to discover slots
  • Fix default slots count when using --use-hwthread-cpus
  • Cleanup schizo/prte help files
  • schizo-ompi: add examples for verbose [dvm] block
  • schizo:ompi: require arg when specifying dvm
  • rank_file/LSF: Fix LSB_AFFINITY_HOSTFILE ranking policy
  • Fix the load-balancing and span round-robin mappers
  • doc: Fix --rank-by help output

PR #1575: Ensure we init the available node bit tracker
PR #1572: Fix some default map/rank policy settings
PR #1570: Multiple commits

  • rmaps/base: Fix segv on failed-map
  • ompi/schizo: Fix deprecated message for rankfile
  • Rankfile slots fix and LSF support fix for LSB_AFFINITY_HOSTFILE

PR #1564: Add an example that retrieves node IDs
PR #1562: Remove check for resilience that caused a segfault
PR #1557: Update NEWS
PR #1556: Multiple commits

  • Support query of pset membership
  • Cleanup grpcomm cruft
  • remove some unused vars
  • squash warnings
  • unused var
  • more unused vars
  • remove unused vars and fix rc/ret typo
  • misc unused var cleanups
  • Reduce debugger confusion
  • Pickup missing changes

PR #1548: Multiple commits

  • alps fixes for mca move
  • schizo/ompi: Fix --report-pid/sid.
  • Change --stop-in-* to take optional arguments.
  • Update Open MPI mpirun help text
  • Fix memory leaks in RML and at job termination.
  • plm/tm: Fix build breakage

PR #1539: Multiple commits

  • Fix a typo and expand debugger example range to cover MPI
  • ras/lsf: Fix build breakage
  • Catch some more component updates
  • Allow prterun to act as prun

PR #1534: Multiple commits

  • Fix print statement
  • Push launch-agent CLI into the env
  • Fix mapping by pe-list when oversubscribed
    PR #1530: Actually support the output-proctable option
    PR #1528: Add missing commits and new additions
  • Complete help text on notifications
  • BuildRequires: gcc
  • Plug a memory leak
  • schizo/ompi: Fix --use-hwthead-cpus option
  • Fix --preload-binary

PR #1522: Roll version to rc2
PR #1518: schizo_ompi: use the OMPI_MCA_PREFIXES env var
PR #1517: Multiple commits

  • Remove the --with-ft configure option
  • Replace prte_output with pmix_output
  • Cleanup code clause identification
  • Fix a few minor things
  • Fix setting of runtime options
  • Update the schizo/ompi component
  • ompi/schizo: Fix --do-not-launch and --show-progress
  • schizo/ompi: Fix --display topo
  • schizo/ompi: Remove --display-devel-allocation
  • Added specfile BuildRequires
  • Add action to check commits on pull requests
  • Restore the PRRTE application-level fault tolerance modes
  • Update minimum PMIx version to v4.2.2

PR #1501: Multiple commits

  • Delete PRRTE MCA infrastructure
  • Remove stale m4
  • Handle default MCA params
  • Rename component libraries and component struct names

PR #1498: Remove leftover BINDTONONE SET debug code
PR #1495: Multiple commits

  • Revise passing of runtime options
  • Add/modify some spawn-related tests
  • Update to use PMIx CLI option macro and "check true"

PR #1491: Multiple commits

  • stream-buffering is an OMPI option, so make it an MCA
  • Deprecated the --stream-buffering CLI option
  • Fix hetero topology operations

PR #1487: Use correct target path for Flex check
PR #1485: Fix bug in not updating cached daemon topologies
PR #1483: Fix oversubscription to not require binding
PR #1481: Multiple commits

  • Add support for querying process group attributes
  • Initial work on --enable-devel-check
  • Fix free in hostfile
  • Continue progress on enable-devel-check

PR #1474: Multiple commits

  • Upgrade the cmd line option checker
  • Enable the "show-progress" runtime option
  • Fix the stack trace handshake
  • Add more debug to the node list construction procedure

PR #1469: Multiple commits

  • Raise the minimum required PMIx level to v4.2.1
  • Separate out the runtime controls options

PR #1466: Multiple commits

  • Ensure tools get string explanation for non-norm term
  • stop-in-app does not require an argument
  • Fix compile error with FT enabled
  • schizo/ompi: Fix --do-not-launch
  • Fix typo in help message
  • schizo/ompi: Add translation for --merge-stderr-to-stdout
  • java: add ease-of-use feature for ompi java apps
  • Fix second pass on map-by obj
  • Remove stale references to alloc-dev as display options
  • Get the "--display topo" option to work

PR #1456: Multiple commits

  • Fix synthetic topo support and too early sanity check
  • Correct the support check logic
  • Remove the "report" qualifier from "--bind-to"
  • Fix bind-upward check and cleanup bind output

PR #1450: Update current state of PRRTE help docs
PR #1448: Provide upgrade warning for ancient Slurm versions
PR #1447: Fix app/local rank computation
PR #1444: Fix keepalive CLI option
PR #1441: Include the PMIx libdir in the ssh prefix operation
PR #1440: Do not error out if lib is symlinked to lib64
PR #1437: Avoid loopback interfaces if not needed
PR #1433: Update the job object's binding policy
PR #1431: Fix the tm configure logic
PR #1429: Update help docs
PR #1427: Cleanup the PRRTE rpm spec file
PR #1423: Fix typo in ppr mapper
PR #1417: Remove stale file reference
PR #1415: Update release files for rc1
PR #1414: Remove stale files
PR #1412: Restrict PRRTE to PMIx v4.2+
PR #1410: Remove schizo/hydra component
PR #1409: Add new output options to help string
PR #1407: Support a broader range of IO output formats
PR #1404: Fix a hang in daemon callback
PR #1402: Cleanup race condition in daemon reports
PR #1399: Multiple commits

  • Allow mapping in overload scenario if bind not specified
  • Ensure rankfile and seq mappers computer local and app ranks

PR #1394: Add forwarding of stdin to indirect example
PR #1391: Change the default mapping for --bind-to none option to BYSLOT.
PR #1388: Handle clean shutdown of stdin
PR #1398: Fix stdin forwarding across nodes
PR #1386: Update the dmodex example
PR #1385: Return the PMIx version of "not supported"
PR #1383: Fix resource usage tracking and remove stale mapper
PR #1380: Return zero status when outputting help/version info
PR #1378: Fix a few bugs/leaks in the OOB subsystem
PR #1376: Remove stale Java support
PR #1374: Avoid PMIx server release of HWLOC topology
PR #1373: Use fileno_unlocked if available
PR #1372: Incremental valgrind improvements
PR #1368: prrte: fix core dump while printing stack-trace
PR #1365: odls: fix alps compilation problem
PR #1363: Support colocation of spawned procs
PR #1359: configure.ac: update directory space check
PR #1357: configury: do look for sed
PR #1355: Remove setting of PRTE_MCA_prte_base_help_aggregate.
PR #1353: Restore noloop for logging
PR #1350: Use PMIx_Log() for show_help() messages
PR #1348: Update to account for PMIX_MYSERVER_URI
PR #1347: Streamline operations a bit
PR #1340: Error out if no atomic support is available
PR #1337: Add atomistic error outputs
PR #1336: Restore detailed error msg for some codes
PR #1334: Correctly add qualifiers to options
PR #1333: dist: minor fixes to enable all_in_one rpm
PR #1331: Remove non-existent function
PR #1328: schitzo/ompi: trivial helpfile update
PR #1327: rmaps/ppr: Fix case where oversubscribe is ignored
PR #1325: Cleanup report of bad executable name
PR #1323: Revise show_help to use PMIx IOF
PR #1319: prtereachable: missed something in pr 1315
PR #1318: prte: check if dvm actually got set up
PR #1315: prtereachable: fix problem with nl-route
PR #1314: Correct --do-not-launch option
PR #1312: Restore use of "--cpu-bind=none"
PR #1311: ompi/schizo: Expose "--mca" when parsing command line
PR #1310: Pass the allow-run-as-root option to the backend daemons
PR #1307: Fix indirect slurm launch
PR #1306: Protect against proxy confusion
PR #1303: Add some missing help verbiage
PR #1302: Bugfix: ompi_schizo would modify a const string in base_expose()
PR #1301: slurm: fix breakage owing to rlm refactor
PR #1299: Correctly determine when to daemonize backend prted
PR #1298: Some really minor cleanups
PR #1297: Add missing CLI option and parsing
PR #1293: build: check_package static improvements
PR #1292: build: Fix output stream bug in summary
PR #1291: Fix a problem with the "canonicalize_path" function
PR #1290: build: Remove unnecessary configure tests
PR #1289: build: Remove .m4 files from dist list
PR #1288: build: Do not use pkg-config with libevent
PR #1287: schizos: add --version output for ompi and prte
PR #1286: Build system improvements around check_package
PR #1285: Fix compile warnings and valgrind errors
PR #1275: ras/pbs: fix arguments invokation in configur
PR #1269: schizo/ompi: Convert all single dashes to double dashes
PR #1268: Use a pointer array to track our local requests
PR #1267: Add debugger.h to tarball
PR #1265: Use pmix_hotel_checkin() in eviction callback.
PR #1261: Ensure that stdin goes to all specified targets
PR #1260: Ensure the proc PIDs are updated upon launch
PR #1258: Carry across the PRRTE toolname to PMIx
PR #1257: Fix some issues with tool help
PR #1256: Ensure the proctable includes absolute paths to executable
PR #1254: Remove stale files
PR #1247: Fix includes for data-structures in prtereachable
PR #1246: Fix one more place in dmodex example
PR #1244: Fix ipv6 build
PR #1242: Correct some pmix class status code checks
PR #1241: Fix some PMIx vs PRRTE confusion
PR #1240: Fix PRTE_RML_SEND() call to squash bug/warning.
PR #1239: More FT-enabled compile fixes for RML
PR #1238: Fix rml send use when FT enabled
PR #1236: Few small changes to make_dist_tarball
PR #1235: Add a GitHub Action for the PRRTE Special Builds
PR #1234: Eliminate PRTE_FLAGS_UNIQ
PR #1232: RML Rework: Stage 3 - remove routed framework
PR #1231: Remove confusing garbage file
PR #1229: RML rework: Stage 2 - convert RML framework
PR #1228: Rewrite CHECK_PACKAGE to support pkg-config
PR #1227: Fix some ordering issues on cleanup, and a couple memory leaks
PR #1226: Fix find and replace errors for pmix_fd
PR #1225: RML rework: Stage 1 - remove unused components
PR #1224: Convert keyval_parse to pmix_keyval_parse
PR #1223: Replace context_fns with their PMIx equivalents
PR #1220: Convert prte_cmd_line to pmix_cmd_line
PR #1218: Update PMIx configury
PR #1217: Convert multiple PRTE utilities to their PMIx equivalents
PR #1216: Convert printf to pmix_printf
PR #1215: Use pmix_argv functions and remove the prte versions
PR #1214: Convert basename.h to pmix_basename.h
PR #1213: Fix --mca processing.
PR #1210: Update TM configure logic to include tm library location
PR #1207: Ensure tool procs are not counted against resource limits
PR #1202: Fix typo
PR #1201: Fix the command line parser
PR #1200: Fix the param and show-version options of prte_info
PR #1198: Cleanup a bit in prep for PMIx sync to v5 std
PR #1195: Remove HWLOC version block
PR #1194: Enable per-job specification of the exec agent
PR #1190: Add missing examples to tarball
PR #1189: Ensure an error gets reported when rankfile fails

SHA1sums

dc9d7cfb12bbde1ba47da2b6f65e11f64a2b9c8d  prrte-3.0.0.tar.bz2
d42b073a256bb0fb205bb1d65cc4b9af81608524  prrte-3.0.0.tar.gz
4433c3ccadea65b754d90c2ceb17a917ad6597a5  prrte-3.0.0-1.src.rpm
Assets 5
Loading