Support PTP Yang model based on IEEE standard

release/models/ptp/.spec.yml

@@ -0,0 +1,8 @@
+- name: openconfig-ptp
+  docs:
+    - yang/ptp/openconfig-ptp-types.yang
+    - yang/ptp/openconfig-ptp.yang
+  build:
+    - yang/ptp/openconfig-ptp-types.yang
+    - yang/ptp/openconfig-ptp.yang
+  run-ci: true

release/models/ptp/openconfig-ptp-types.yang

@@ -0,0 +1,305 @@
+module openconfig-ptp-types {
+  yang-version "1";
+
+  // namespace
+  namespace "http://openconfig.net/yang/ptp-types";
+
+  prefix "oc-ptp-types";
+
+  import ietf-interfaces {
+    prefix if;
+  }
+
+  import ietf-inet-types {
+    prefix inet;
+  }
+
+  import openconfig-extensions {
+    prefix oc-ext;
+  }
+
+  // meta
+  organization
+    "OpenConfig working group";
+
+  contact
+    "OpenConfig working group
+    www.openconfig.net ";
+
+  description
+    "This module defines types and identities used in OpenConfig
+    models related to Precision Time Protocol (PTP).
+
+    IEEE code is subject to the following copyright and license:
+    Copyright (c) 2020 by The Institute of Electrical and Electronics
+    Engineers, Inc. All rights reserved.";
+
+  oc-ext:openconfig-version "0.1.0";
+
+  revision 2024-01-22 {
+      description
+          "Initial Public Version";
+      reference "0.1.0";
+  }
+
+  // extension statements
+
+  // feature statements
+
+  // identity statements
+
+  identity time-source {
+    description
+      "Enumeration for the source of time used by the Grandmaster
+      PTP Instance.
+      YANG identity is used so that a PTP Profile's YANG augment
+      can assign values, using numeric range F0 to FE hex.";
+    reference
+      "7.6.2.8 of IEEE Std 1588-2019";
+  }
+
+  identity clock-class {
+    description
+      "Enumeration that denotes the traceability, synchronization
+      state and expected performance of the time or frequency
+      distributed by the Grandmaster PTP Instance.
+      IEEE Std 1588 does not specify a name for each clock-class,
+      but the names below are intended to be as intuitive as possible.
+      YANG identity is used so that a PTP Profile's YANG augment
+      can assign values using a numeric range designated for use by
+      alternate PTP Profiles.";
+    reference
+      "7.6.2.5 of IEEE Std 1588-2019";
+  }
+
+  identity clock-accuracy {
+    description
+      "Enumeration that indicates the expected accuracy of a
+      PTP Instance when it is the Grandmaster PTP Instance,
+      or in the event it becomes the Grandmaster PTP Instance.
+      The value shall be conservatively estimated by the PTP
+      Instance to a precision consistent with the value of the
+      selected clock-accuracy and of the next lower enumerated
+      value, for example, for clockAccuracy = 23 hex, between
+      250 ns and 1000 ns.
+      IEEE Std 1588 does not specify a name for each clock-accuracy,
+      but the names below are intended to be as intuitive as possible.
+      YANG identity is used so that a PTP Profile's YANG augment
+      can assign values, using numeric range 80 to FD hex.";
+    reference
+      "7.6.2.6 of IEEE Std 1588-2019";
+  }
+
+  typedef clock-identity {
+    type string {
+      pattern "[0-9A-F]{2}(-[0-9A-F]{2}){7}";
+    }
+    description
+      "Identifies unique entities within a PTP Network,
+      e.g. a PTP Instance or an entity of a common service.
+      The identity is an 8-octet array, constructed according
+      to specifications in IEEE Std 1588, using an
+      organization identifier from the IEEE Registration
+      Authority.
+      Each octet is represented in YANG as a pair of
+      hexadecimal characters, using uppercase for a letter.
+      Each octet in the array is separated by the dash
+      character.";
+    reference
+      "5.3.4 of IEEE Std 1588-2019
+      7.5.2.2 of IEEE Std 1588-2019";
+  }
+
+  typedef time-interval {
+    type int64;
+    description
+      "Time interval, expressed in nanoseconds, multiplied by 2^16.
+      Positive or negative time intervals outside the maximum range
+      of this data type shall be encoded as the largest positive and
+      negative values of the data type, respectively.";
+    reference
+      "5.3.2 of IEEE Std 1588-2019";
+  }
+
+typedef instance-type {
+    type enumeration {
+      enum OC {
+        value 0;
+        description
+          "Ordinary Clock";
+      }
+      enum BC {
+        value 1;
+        description
+          "Boundary Clock";
+      }
+      enum P2P-TC {
+        value 2;
+        description
+          "Peer-to-peer Transparent Clock";
+      }
+      enum E2E-TC {
+        value 3;
+        description
+          "End-to-end Transparent Clock";
+      }
+    }
+    description
+      "Enumeration for the type of PTP Instance.
+      Values for this enumeration are specified by the IEEE 1588
+      standard exclusively.";
+    reference
+      "8.2.1.5.5 of IEEE Std 1588-2019";
+  }
+
+
+  typedef unicast-multicast-enumeration {
+    type enumeration {
+        enum UNICAST {
+            value 1;
+            description
+                "unicast";
+        }
+        enum MULTICAST {
+            value 2;
+            description
+                "multicast";
+        }
+    }
+    description
+      "Type definition for options when setting the unicast-multicast
+      attribute in the default data set";
+  }
+
+  typedef delay-mechanism-enumeration {
+      type enumeration {
+          enum E2E {
+              value 1;
+              description
+                  "The port uses the delay request-response mechanism.";
+          }
+          enum P2P {
+              value 2;
+              description
+                  "The port uses the peer delay mechanism.";
+          }
+          enum DISABLED {
+              value 254;
+              description
+                  "The port does not implement any delay mechanism.";
+          }
+      }
+      description
+          "The propagation-delay measuring option used by the
+          port.  Values for this enumeration are specified
+          by the IEEE Std 1588 standard exclusively.";
+      reference
+          "IEEE Std 1588-2008: 8.2.5.4.4";
+  }
+
+  typedef port-state-enumeration {
+      type enumeration {
+          enum INITIALIZING {
+              value 1;
+              description
+                  "The port is initializing its data sets, hardware, and
+                  communication facilities.";
+          }
+          enum FAULTY {
+              value 2;
+              description
+                  "The port is in the fault state.";
+          }
+          enum DISABLED {
+              value 3;
+              description
+                  "The port is disabled and is not communicating PTP
+                  messages (other than possibly PTP management
+                  messages).";
+          }
+          enum LISTENING {
+              value 4;
+              description
+                  "The port is listening for an Announce message.";
+          }
+          enum PRE_MASTER {
+              value 5;
+              description
+                  "The port is in the pre-master state.";
+          }
+          enum MASTER {
+              value 6;
+              description
+                  "The port is behaving as a master port.";
+          }
+          enum PASSIVE {
+              value 7;
+              description
+                  "The port is in the passive state.";
+          }
+          enum UNCALIBRATED {
+              value 8;
+              description
+                  "A master port has been selected, but the port is still
+                  in the uncalibrated state.";
+          }
+          enum SLAVE {
+              value 9;
+              description
+                  "The port is synchronizing to the selected master port.";
+          }
+      }
+      description
+          "The current state of the protocol engine associated
+          with the port.  Values for this enumeration are specified
+          by the IEEE Std 1588 standard exclusively.";
+      reference
+          "IEEE Std 1588-2008: 8.2.5.3.1, 9.2.5";
+  }
+
+  typedef network-transport-enumeration {
+      type enumeration {
+          enum L2 {
+              value 1;
+              description
+                  "Layer 2 network";
+          }
+          enum UDPV4 {
+              value 2;
+              description
+                  "UDPv4 network";
+          }
+          enum UDPV6 {
+              value 3;
+              description
+                  "UDPv6 network";
+          }
+      }
+      description
+          "Type definition for options when setting the network transport
+          attribute in the default data set";
+  }
+
+  typedef domain-profile-enumeration {
+    type enumeration {
+      enum IEEE1588 {
+        value 1;
+        description
+            "default profile";
+      }
+      enum G8275.1 {
+        value 2;
+        description
+          "g8275.1 profile";
+      }
+      enum G8275.2 {
+        value 3;
+        description
+          "g8275.2 profile";
+      }
+    }
+    description
+      "Type definition for options when setting the domain-profile
+      attribute in the default data set";
+  }
+}