Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
pinctrl: rockchip: list all pins in a possible mux route for PX30
[ Upstream commit bee55f2 ] The mux routes are incomplete for the PX30. This was discovered because we had a HW design using cif-clkoutm1 with the correct pinmux in the Device Tree but the clock would still not work. There are actually two muxing required: the pin muxing (performed by the usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1; performed by the mux routing inside the driver). The pin muxing was correct but the function muxing was not. This adds the missing pins and their configuration for the mux routes that are already specified in the driver. Note that there are some "conflicts": it is possible *in Device Tree* to (attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time but this is actually not possible in hardware (because both share the same bit for the function muxing). Since it is an impossible hardware design, it is not deemed necessary to prevent the user from attempting to "misconfigure" the pins/functions. Fixes: 87065ca ("pinctrl: rockchip: Add pinctrl support for PX30") Signed-off-by: Quentin Schulz <[email protected]> Link: https://lore.kernel.org/r/20221017-upstream-px30-cif-clkoutm1-v1-0-4ea1389237f7@theobroma-systems.com Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
- Loading branch information