net: mvneta: fix the Rx desc DMA address in the Rx path

[ Upstream commit 271f7ff ]

When using s/w buffer management, buffers are allocated and DMA mapped.
When doing so on an arm64 platform, an offset correction is applied on
the DMA address, before storing it in an Rx descriptor. The issue is
this DMA address is then used later in the Rx path without removing the
offset correction. Thus the DMA address is wrong, which can led to
various issues.

This patch fixes this by removing the offset correction from the DMA
address retrieved from the Rx descriptor before using it in the Rx path.

Fixes: 8d5047c ("net: mvneta: Convert to be 64 bits compatible")
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

drivers/net/ethernet/marvell/mvneta.c

@@ -1932,7 +1932,7 @@ static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo,
 		rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
 		index = rx_desc - rxq->descs;
 		data = rxq->buf_virt_addr[index];
-		phys_addr = rx_desc->buf_phys_addr;
+		phys_addr = rx_desc->buf_phys_addr - pp->rx_offset_correction;
 
 		if (!mvneta_rxq_desc_is_first_last(rx_status) ||
 		    (rx_status & MVNETA_RXD_ERR_SUMMARY)) {