Merge branch 'obs_lite'

merge obs_lite to the case repo

lib/utils.scad

@@ -144,4 +144,52 @@ module load_svg(filename) {
   else {
     import(filename);
   }
-}
+}
+
+
+/*
+The code below is from keyv2
+https://github.com/rsheldiii/KeyV2
+
+which is licensed under GPL
+
+We only need the round cherry key stem
+*/
+
+
+
+module rounded_cherry_stem(depth, slop, throw) {
+    difference() {
+        cylinder(d = $rounded_cherry_stem_d, h = depth);
+
+        // inside cross
+        // translation purely for aesthetic purposes, to get rid of that awful lattice
+        inside_cherry_cross($stem_inner_slop);
+    }
+}
+
+module inside_cherry_cross(slop) {
+    // inside cross
+    // translation purely for aesthetic purposes, to get rid of that awful lattice
+    translate([0, 0, -SMALLEST_POSSIBLE]) {
+        linear_extrude(height = $stem_throw) {
+            square(cherry_cross(slop, extra_vertical)[0], center = true);
+            square(cherry_cross(slop, extra_vertical)[1], center = true);
+        }
+    }
+
+    // Guides to assist insertion and mitigate first layer squishing
+    if ($cherry_bevel) {
+        for (i = cherry_cross(slop, extra_vertical)) hull() {
+            linear_extrude(height = 0.01, center = false) offset(delta = 0.4) square(i, center = true);
+            translate([0, 0, 0.5]) linear_extrude(height = 0.01, center = false)  square(i, center = true);
+        }
+    }
+}
+
+function cherry_cross(slop, extra_vertical = 0) = [
+    // horizontal tine
+        [4.03 + slop, 1.25 + slop / 3],
+    // vertical tine
+        [1.15 + slop / 3, 4.23 + extra_vertical + slop / 3 + SMALLEST_POSSIBLE],
+    ];

src/LiteCase/HandlebarButton.scad

@@ -0,0 +1,135 @@
+include <../../variables.scad>
+use <../../lib/Round-Anything/polyround.scad>
+
+use <../../lib/utils.scad>
+
+
+$fn = 60;
+z = [0, 0, 1];
+y = [0, 1, 0];
+x = [1, 0, 0];
+cz = 1.2;
+h = 15;
+cxy = 13.7;
+size = [cxy, cxy, h];
+z1 = -h / 2;
+sizeb = [cxy + 1, cxy, cz];
+z2 = -cz * 1.5;
+sizet = [cxy + 2, cxy + 2, 4];
+sizef = [cxy + 5, cxy + 5, h];
+z4 = -sizef[2] / 2;
+SMALLEST_POSSIBLE = 0.01;
+
+//if ($preview) import("/home/paulg/Downloads/kailh_low.stl");
+module hole() {
+    translate(z1 * z)cube(size, center = true);
+    translate(z2 * z)cube(sizeb, center = true);
+    translate(2 * z)cube(sizet, center = true);
+}
+
+module handlebar()
+{
+    translate((50) / 2 * y - 18.5 * z)rotate([90, 0, 0])cylinder(d = 25.4, h = 50);
+}
+
+module cable() {
+    hull() {
+        translate([4.5, 0, -5])rotate([90, 0, 0])cylinder(d = 4, h = 20);
+        translate([4.5, 0, -12])rotate([90, 0, 0])cylinder(d = 4, h = 20);
+    }
+}
+
+module hookprofile() {
+    hull()for (i = [-1, 1])translate([0, i * 3])circle(d = 2.5);
+}
+
+module support(zoffset) {
+    hull() {
+        translate([-1.25, 0, -0.2])linear_extrude(0.2)hookprofile();
+        translate([2.5, 0, -0.2])linear_extrude(0.2)hookprofile();
+    }
+    hull() {
+        translate([2.5, 0, -0.01])linear_extrude(0.01)hookprofile();
+        translate([2.5, 0, -zoffset + 2.5])linear_extrude(0.2)hookprofile();
+        translate([2.2, 0, -zoffset + 2.5])rotate([0, 90, 0])linear_extrude(0.6)hookprofile();
+    }
+}
+module hookbase(zoffset) {
+    translate(-zoffset * z)rotate(-[90, 0, 0]) {
+        rotate_extrude(angle = 180) translate([2.5, 0]) hookprofile();
+        hull() {
+            translate([2.2, 0, 0])rotate([90, 0, 90])linear_extrude(0.6)hookprofile();
+            translate([2.5, 0, 0])rotate([90, 0, 00])linear_extrude(0.2)hookprofile();
+        }
+    }
+    support(zoffset);
+
+}
+
+
+
+module button(detail = true) {
+    difference() {
+        union() {
+            translate(z4 * z)cube(sizef, center = true);
+                if (detail) {
+        translate(0.5 * [cxy + 5 + 2.5, 0, 0])hookbase(6);
+        mirror([1, 0, 0])translate(0.5 * [cxy + 5 + 2.5, 0, 0])hookbase(6);
+    }
+        }
+
+        if (detail) {
+            hole();
+            handlebar();
+            cable();
+        }
+    }
+
+}
+
+button();
+
+
+
+
+module buttoncutter(spacing = .5) {
+    translate(-(spacing + 3.5) * z)minkowski() {
+        cube(spacing, center = true);
+        union() {button(detail = false);
+            hull() {
+                linear_extrude(1)translate((-cxy / 2 - 1) * (x + y))square([cxy + 2, cxy + 2]);
+                translate(z * 2.5)linear_extrude(1)translate((-cxy / 2) * (x + y))square([cxy, cxy]);
+            }
+        }
+    }
+}
+
+module roundedsquare(sizes, r = 2) {
+    points = [[0, 0, r],
+            [sizes[0], 0, r],
+            [sizes[0], sizes[1], r],
+            [0, sizes[1], r]
+        ];
+    echo(points);
+    translate(0.5 * [-sizes[0], -sizes[1]])polygon(polyRound(points));
+}
+
+
+module buttontop(wall = 3) {
+    translate(-6 * z)rounded_cherry_stem(6, 0.2, 4);
+    translate(-6 * z)rounded_cherry_stem(6, 0.2, 4);
+    difference() {
+        hull() {
+            translate(-z)linear_extrude(1)roundedsquare([cxy + 3, cxy + 3]);
+            translate(-5 * z)linear_extrude(1)translate((-(cxy + 5 + wall) / 2) * (x + y))square([cxy + 5 + wall, cxy +
+                5 + wall]);
+            translate(-11 * z)linear_extrude(1)translate((-(cxy + 5 + wall) / 2) * (x + y))square([cxy + 5 + wall, cxy +
+                5 + wall]);
+
+        }
+        translate(-z)buttoncutter();
+        translate(-4*z)cable();
+    }
+}
+
+translate(-30 * y)buttontop();