PDP11: RP11: Major update after XXDP

Having run the device code thru XXDP and some other OS's and scenarios
rigorously, a bunch of discrepancies were found, which need to be addressed
by this rather extensive patch.

1. Each drive must implement its own "drive status" register, to be able to
   track per-drive errors / conditions correctly;
2. Fixed INT_SET() / INT_CLR() in RPCS write function (wrong order of the "if"
   conditions);
3. Some behavior was implemented not exactly how it was expected from the real
   hardware, such as:
   a. Post-I/O register values in RPDA and RPCA (including the corner case of
      pack overflow);
   b. I/O stacking, which wasn't mentioned in any available documentation, but
      only XXDP listings;
   c. RESET/IDLE function must be accepted for a "busy" controller;
   d. HOME function must always execute, even when "device ready" is not set
      (e.g. when SEEK error detected);
   e. SEEK incomplete should not respond with "device ready" (however, the
      condition can be cleared by HOME, d.);
   f. WLOA-induced write-lock violation wasn't reflected in "device status".
4. Some timing was off so that the device worked "too fast" -- this was fixed
   (except for the pathological cases when the races are in the actual test
   code, and cannot be logically fixed);
5. WLOA setup command bug was fixed;
6. Added more code comments found per the above peculiarities.