Krux Binaries

Experimental compiled Krux binaries.

For stable releases, please download from official repository

Flash Instructions:

Make ktool executable:

chmod +x ktool-linux 

To Flash Maix Amigo run:

./ktool-linux -B goE -b 1500000 maixpy_amigo/kboot.kfpkg

To Flash M5stickV run:

./ktool-linux -B goE -b 1500000 maixpy_m5stickv/kboot.kfpkg

To Flash Maix Bit run:

./ktool-linux -B goE -b 1500000 maixpy_bit/kboot.kfpkg

To Flash Maix Dock run:

./ktool-linux -B dan -b 1500000 maixpy_dock/kboot.kfpkg

To Flash Yahboom Aimotion you'll have to manually specify the port, on this example /dev/ttyUSB0:

./ktool-linux -B goE -b 1500000 -p /dev/ttyUSB0 maixpy_yahboom/kboot.kfpkg

To Flash Maix Cube run:

./ktool-linux -B goE -b 1500000 maixpy_cube/kboot.kfpkg

Obs: You might need to use "sudo" if your user don't have access to serial port

Flashing on Windows

Replace './ktool-linux' for 'ktool-win.exe' and / for \ in commands. Ex:

ktool-win.exe -B goE -b 1500000 maixpy_amigo\kboot.kfpkg

Wiring

For Maix Bit connect Buttons between pins 22, 21 and GND.

22 is for "Enter ", 21 is for "Page"

For Maix Dock connect a rotary encoder:

Encoder - Maix Dock
   GND <->  GND
     + <->  3V3e
    SW <-> Pin 9
    DT <-> Pin 10
   CLK <-> Pin 11

3D Print a Case

Maix Bit

Maix Dock

Krux FAQ

FAQ

More Info

Code compiled on this binaries from: https://github.com/odudex/krux/tree/odudex_develop

This binaries are NOT signed and for test purposes only