HCL/DDL bump 20230830

APC/APC__Smart-UPS_1000__snmp-ups__2.7.4__01.dev

@@ -0,0 +1,62 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut/issues/1740#issuecomment-1364539768
+
+# DEVICE:COMMENT-BLOCK:
+# An APC SUA1000 UPS (reports itself as Smart-UPS 1000) connected via SNMPv1
+# does not have the problem described in this ticket: Battery Runtime matches
+# on UPS and NUT monitoring, and equals `70680.00` here.
+# DEVICE:EOC
+
+ambient.1.humidity.alarm.high: 89.00
+ambient.1.humidity.alarm.low: 11.00
+ambient.1.temperature.alarm.high: 59.00
+ambient.1.temperature.alarm.low: 1.00
+battery.charge: 93.00
+battery.charge.restart: 0
+battery.current: 0.00
+battery.date: 12/01/22
+battery.packs: 4.00
+battery.packs.bad: -1.00
+battery.runtime: 70680.00
+battery.runtime.low: 120
+battery.voltage: 25.60
+battery.voltage.nominal: -1.00
+device.mfr: APC
+device.model: Smart-UPS 1000
+device.serial: AS0802331853
+device.type: ups
+driver.name: snmp-ups
+driver.parameter.pollfreq: 20
+driver.parameter.pollinterval: 2
+driver.parameter.port: 192.168.1.51
+driver.parameter.snmp_retries: 10
+driver.parameter.snmp_timeout: 5
+driver.parameter.snmp_version: v1
+driver.parameter.synchronous: no
+driver.version: 2.7.4
+driver.version.data: apcc MIB 1.2
+driver.version.internal: 0.97
+input.frequency: 50.00
+input.sensitivity: medium
+input.transfer.high: 253
+input.transfer.low: 200
+input.transfer.reason: rateOfVoltageChange
+input.voltage: 0.00
+input.voltage.maximum: 0.00
+input.voltage.minimum: 0.00
+output.current: 0.40
+output.frequency: 50.00
+output.voltage: 220.40
+output.voltage.nominal: 220
+ups.delay.shutdown: 0
+ups.delay.start: 0
+ups.firmware: 652.18.I
+ups.id: kotel
+ups.load: 16.90
+ups.mfr: APC
+ups.mfr.date: 01/12/08
+ups.model: Smart-UPS 1000
+ups.serial: AS0802331853
+ups.status: OB
+ups.temperature: 33.30
+ups.test.date: 12/11/2022
+ups.test.result: Ok

APC/APC__Smart-UPS_2200__usbhid-ups__2.7.4__01.dev

@@ -0,0 +1,58 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut/issues/1740#issue-1509493225
+
+# DEVICE:COMMENT-BLOCK:
+# The Battery Runtime data does not match the data from the APC UPS.
+# This looks like some kind of variable limitation, since the `upsc`
+# shows `65535`, which is equal to 18 hours 12 minutes and 15 seconds.
+# But in fact, the APC UPS shows the remaining time as 34 hours 1 min.
+#
+# Packaged "nut is already the newest version (2.7.4-13)".
+# DEVICE:EOC
+
+battery.charge: 93
+battery.charge.low: 10
+battery.charge.warning: 50
+battery.mfr.date: 2022/10/25
+battery.runtime: 65535
+battery.runtime.low: 1200
+battery.temperature: 16.6
+battery.type: PbAc
+battery.voltage: 52.4
+battery.voltage.nominal: 48.0
+device.mfr: American Power Conversion
+device.model: Smart-UPS 2200
+device.serial: AS1250244567
+device.type: ups
+driver.name: usbhid-ups
+driver.parameter.pollfreq: 10
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.synchronous: no
+driver.version: 2.7.4
+driver.version.data: APC HID 0.96
+driver.version.internal: 0.41
+input.sensitivity: medium
+input.transfer.high: 253
+input.transfer.low: 200
+input.voltage: 0.0
+output.current: 0.50
+output.frequency: 50.0
+output.voltage: 220.4
+output.voltage.nominal: 220.0
+ups.beeper.status: disabled
+ups.delay.shutdown: 20
+ups.delay.start: 30
+ups.firmware: 654.19.I
+ups.firmware.aux: 7.4
+ups.load: 5.2
+ups.mfr: American Power Conversion
+ups.mfr.date: 2012/12/11
+ups.model: Smart-UPS 2200
+ups.productid: 0002
+ups.serial: AS1250244567
+ups.status: OB DISCHRG
+ups.test.result: No test initiated
+ups.timer.reboot: -1
+ups.timer.shutdown: -1
+ups.timer.start: -1
+ups.vendorid: 051d

APC/APC__Smart-UPS_3000__snmp-ups__2.7.4__01.dev

@@ -0,0 +1,48 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut-ddl/issues/24
+
+ambient.1.humidity.alarm.high: 60.00
+ambient.1.humidity.alarm.low: 30.00
+ambient.1.temperature.alarm.high: 40.00
+ambient.1.temperature.alarm.low: 10.00
+battery.charge: 100.00
+battery.date: 08/08/2015
+battery.runtime: 6900.00
+battery.runtime.low: 120
+battery.voltage: 54.50
+device.mfr: APC
+device.model: Smart-UPS 3000
+device.serial: AS1532232414
+device.type: ups
+driver.name: snmp-ups
+driver.parameter.pollinterval: 2
+driver.parameter.port: ups1.lw
+driver.parameter.synchronous: no
+driver.version: 2.7.4
+driver.version.data: apcc MIB 1.2
+driver.version.internal: 0.97
+input.frequency: 50.00
+input.sensitivity: high
+input.transfer.high: 253
+input.transfer.low: 207
+input.transfer.reason: noTransfer
+input.voltage: 228.80
+input.voltage.maximum: 228.80
+input.voltage.minimum: 226.00
+output.current: 0.60
+output.frequency: 50.00
+output.voltage: 228.80
+output.voltage.nominal: 230
+ups.delay.shutdown: 120
+ups.delay.start: 10
+ups.firmware: UPS 09.3 (ID18)
+ups.id: APCUPS-1
+ups.load: 5.00
+ups.mfr: APC
+ups.mfr.date: 08/08/2015
+ups.model: Smart-UPS 3000
+ups.serial: AS1532232414
+ups.status: OL
+ups.temperature: 23.30
+ups.test.date: 03/24/2022
+ups.test.result: InvalidTest
+

APC/APC__Smart-UPS_750__usbhid-ups__2.8.0__01.dev

@@ -0,0 +1,46 @@
+# DEVICE:URL:REPORT: https://github.com/networkupstools/nut/issues/1261#issuecomment-1702211089
+
+# DEVICE:COMMENT
+# Following up from report about Smart-UPS X 750 earlier in the linked ticket
+# (about missing data points).
+#
+# > ...In the meantime I also got a stand alone Smart-UPS 750 (SMT750I).
+# > If I'm correct, SMT and SMX series are siblings (released about the
+# > same time, share almost identical local LCD interface). SMT are "tower"
+# > while SMX are rack mounted and support external battery packs.
+# > It reports exactly the same set of data as SMX750I.
+# DEVICE:EOC
+
+battery.charge: 100
+battery.charge.low: 10
+battery.charge.warning: 50
+battery.runtime: 4320
+battery.runtime.low: 120
+battery.type: PbAc
+battery.voltage: 27.1
+battery.voltage.nominal: 24.0
+device.mfr: American Power Conversion 
+device.model: Smart-UPS 750
+device.serial: AS1316113420  
+device.type: ups
+driver.name: usbhid-ups
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.synchronous: auto
+driver.version: 2.8.0
+driver.version.data: APC HID 0.98
+driver.version.internal: 0.47
+driver.version.usb: libusb-1.0.26 (API: 0x1000109)
+ups.beeper.status: enabled
+ups.delay.shutdown: 20
+ups.firmware: UPS 09.8 / ID=18
+ups.mfr: American Power Conversion 
+ups.mfr.date: 2013/04/19
+ups.model: Smart-UPS 750
+ups.productid: 0003
+ups.serial: AS1316113420  
+ups.status: OL
+ups.timer.reboot: -1
+ups.timer.shutdown: -1
+ups.vendorid: 051d