FSP/FSP__Fortron_UPS_Champ_1000VA_Tower__nutdrv_qx__2.7.4__02.dev: fi…

…x device block markup

Signed-off-by: Jim Klimov <[email protected]>

FSP/FSP__Fortron_UPS_Champ_1000VA_Tower__nutdrv_qx__2.7.4__02.dev

@@ -79,54 +79,54 @@ ups.vendorid: 0665
 # Type: ENUM
 # Option: "no" SELECTED
 # Option: "yes"
-
+#
 # [battery.packs]
 # Number of battery packs
 # Type: RANGE
 # Option: "1-99" SELECTED
-
+#
 # [battery.protection]
 # Prevent deep discharge of battery
 # Type: ENUM
 # Option: "no"
 # Option: "yes" SELECTED
-
+#
 # [input.frequency.high]
 # Maximum input line frequency (Hz)
 # Type: RANGE
 # Option: "53-60" SELECTED
-
+#
 # [input.frequency.low]
 # Minimum input line frequency (Hz)
 # Type: RANGE
 # Option: "40-47" SELECTED
-
+#
 # [input.transfer.high]
 # High voltage transfer point (V)
 # Type: RANGE
 # Option: "227-244" SELECTED
-
+#
 # [input.transfer.low]
 # Low voltage transfer point (V)
 # Type: RANGE
 # Option: "196-213" SELECTED
-
+#
 # [ups.delay.shutdown]
 # Interval to wait after shutdown with delay command (seconds)
 # Type: RANGE
 # Option: "12-5940" SELECTED
-
+#
 # [ups.delay.start]
 # Interval to wait before (re)starting the load (seconds)
 # Type: RANGE
 # Option: "0-599940" SELECTED
-
+#
 # [ups.start.auto]
 # UPS starts when mains is (re)applied
 # Type: ENUM
 # Option: "no"
 # Option: "yes" SELECTED
-
+#
 # [ups.start.battery]
 # Allow to start UPS from battery
 # Type: ENUM