ESP32APRS_T-TWR V0.4 (Factory reset require)

History update V0.4

• Fix crash and reboot
• Add support for Open Edition

ESP32APRS_T-TWR firmware installation (do it first time, next time via the web browser)

• 1.Connect the USB cable to the LILYGO T-TWR Plus.
• 2.Press the PWR button for one second to make sure the TWR is powered on
• 3.Press and hold the BOOT button (without releasing it), then press the RST button, then release the RST button, and finally release the BOOT button
• 4.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32APRS_TWR_Vxx.bin, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x0000 and boot_app0.bin at 0xe000
• 5.Click the START button in the program and wait for the upload to complete
• 6.You can enter configuration mode in 3 ways:
• 6.1 Use rotary switch + display direct config in the menu icon SETTING
• 6.2 Default config then go to WiFi AP SSID: ESP32APRS PASS: aprsthnetwork or scan QR code in the menu icon QR Web Service (push long switch to WiFi QR connection) and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
• 6.3 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork or scan QR code in the menu icon 'QR Web Service' (push long switch to web browser) default web auth USER: admin PASS: admin
• 7.Push BOOT button long >100ms to manual TX Position in the tracker mode

ESP32APRS_T-TWR V0.3 (Factory reset require)

History update V0.3a

• Fix html tag
• Update jquery to gzip
• Update path selection

V0.3 (Factory reset require)

• Update V0.2a-V0.2g
• Add jquery code in the webservice
• Add TimeStamp position packet issues #5
• Add FM Voice & APRS after voice
• Add factory reset push on boot

ESP32APRS_T-TWR firmware installation (do it first time, next time via the web browser)

• 1.Connect the USB cable to the LILYGO T-TWR Plus.
• 2.Press the PWR button for one second to make sure the TWR is powered on
• 3.Press and hold the BOOT button (without releasing it), then press the RST button, then release the RST button, and finally release the BOOT button
• 4.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32APRS_TWR_Vxx.bin, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x0000 and boot_app0.bin at 0xe000
• 5.Click the START button in the program and wait for the upload to complete
• 6.You can enter configuration mode in 3 ways:
• 6.1 Use rotary switch + display direct config in the menu icon SETTING
• 6.2 Default config then go to WiFi AP SSID: ESP32APRS PASS: aprsthnetwork or scan QR code in the menu icon QR Web Service (push long switch to WiFi QR connection) and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
• 6.3 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork or scan QR code in the menu icon 'QR Web Service' (push long switch to web browser) default web auth USER: admin PASS: admin
• 7.Push BOOT button long >100ms to manual TX Position in the tracker mode

ESP32APRS_T-TWR V0.2

Version 0.2a (Build)

• Edit bug null path

Version 0.2b (Build)

• Edit bug parse comment cast
• Edit bug Bluetooth
• Edit bug PACKET TX
• Edit HPF expand cutoff freq 10Khz
• Edit Default Filter
• Add Versoin build in server login
• Add Trim callsing and object in webconfig

Version 0.2c (Build)

• Edit bug not tracker interval initialize.
• Edit type information issues #4

Version 0.2e (Build)

• Fix bug tone rx select in webservice
• Fix SR120V/U RF Module config
• Delete label ESP32 in webservice information issues #4
• Add Audio color gain in webservice

Version 0.2f (Build)

• Enable long press shutdown
• Start a new TX period when it is reset.
• Fix handle webservice

Version 0.2g (Build)

• Fix bug compress position South,West

New build version updated by OTA only.

ESP32APRS_T-TWR firmware installation (do it first time, next time via the web browser)

• 1.Connect the USB cable to the LILYGO T-TWR Plus.
• 2.Press the PWR button for one second to make sure the TWR is powered on
• 3.Press and hold the BOOT button (without releasing it), then press the RST button, then release the RST button, and finally release the BOOT button
• 4.Download firmware and open the program ESP32 DOWNLOAD TOOL, set it in the firmware upload program, set the firmware to ESP32APRS_TWR_Vxx.bin, location 0x10000 and partitions.bin at 0x8000 and bootloader.bin at 0x0000 and boot_app0.bin at 0xe000
• 5.Click the START button in the program and wait for the upload to complete
• 6.You can enter configuration mode in 3 ways:
• 6.1 Use rotary switch + display direct config in the menu icon SETTING
• 6.2 Default config then go to WiFi AP SSID: ESP32APRS PASS: aprsthnetwork or scan QR code in the menu icon QR Web Service (push long switch to WiFi QR connection) and open a web browser to the website. http://192.168.4.1 default web auth USER: admin PASS: admin
• 6.3 Default config then go to share or set router WiFi SSID: APRSTH PASS: aprsthnetwork or scan QR code in the menu icon 'QR Web Service' (push long switch to web browser) default web auth USER: admin PASS: admin
• 7.Push BOOT button long >100ms to manual TX Position in the tracker mode