Skip to content

muhammad-rafi/restconf-cli

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

25 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

published Build Status Release Status Pypi

RESTCONF Command Line Interface (restconf-cli)

Introduction

restconf-cli is a command line interface application which interacts with the restconf enabled devices (i.e. iosxe, nxos, nso). This module uses Python Click module for command line interface (CLI) and rich module for the colorful output. It is built on top of Python requests library to make Restconf API calls. Here are the key information for this modules.

  • Base URL used 'https://<hostname/ip>:/restconf/data/'
  • Default port used for the Restconf API 443
  • Default Headers used for Accept and Content-Type are the following.

Accept: application/yang-data+json Content-Type: application/yang-data+json

Since default headers are using 'application/yang-data+json', therefore, the output will be in following formats for the below type of devices unless specified in the table below.

Device Type IOSXE NXOS NSO
Default Accept Header application/yang-data+json application/yang-data+json application/yang-data+json
Default Content-Type Header application/yang-data+json application/yang-data+json application/yang-data+json
Default Output Format JSON XML JSON

Same for the POST, PUT and PATCH operations, if you do not specify the header fields, it assumes that you are sending the data in the formats mentioned above.

  • Currently tested/supported on Python 3.8, 3.9 and 3.10

Disclaimer: This module uses Insecure Requests which is not recommended, use certificates where possible.

Installation

You can download this module from PyPi repository via PIP

To install a module, simply type

pip install restconf-cli

Note: It is also recommended that use the virtual environment for any package you are testing.

(main) expert@expert-cws:~/venvs$ python -m venv .venv
(main) expert@expert-cws:~/venvs$ source .venv/bin/activate
(.venv) expert@expert-cws:~/venvs$ pip install restconf-cli 

Usage

Once you have installed the restconf-cli package, you can test this against any Cisco IOSXE, NXOS and NSO device. I have not tested for any other devices, but if you come across any device where this is working or not, feel free to raise an issue or send a pull request.

Let's first explore the documentation

Run restconf-cli --help on the terminal for help text

(.venv) expert@expert-cws:~$ restconf-cli --help
Usage: restconf-cli [OPTIONS] COMMAND [ARGS]...

  CLI tool to interact with the restconf APIs currently supported for IOSXE,
  NXOS and NSO.

  This library uses the following root URL for the restconf with port 443 as default port.
  https://<hostname/ip>:<port>/restconf/data/

  Default Headers for Accept and Content-Type are the following.

  Accept: application/yang-data+json
  Content-Type: application/yang-data+json
  
  Since default headers are using 'application/yang-data+json',
  therefore, you will retrieve the output in following formats
  for the below type of devices unless specified for the GET operation.
  
    | Device Type           |            IOSXE             |              NXOS            |             NSO             |
    | :-------------------: | :--------------------------: | :--------------------------: | :-------------------------: |
    | Default Accept        |  application/yang-data+json  |  application/yang-data+json  | application/yang-data+json  |
    | Default Content-Type  |  application/yang-data+json  |  application/yang-data+json  | application/yang-data+json  |
    | Default Output Format |            JSON              |              XML             |             JSON            |
  
  Same for the POST, PUT and PATCH operation if you do not specify the
  header fields, it assumes you are sending the data in the formats
  mentioned above.
  
  Disclaimer: This module uses Insecure Requests which is not recommended, use
  certificates where possible.

Options:
  --help  Show this message and exit.

Commands:
  DELETE  Method to delete the target resource Example: $ restconf-cli...
  GET     Method to retrieve operational or config data from the devices.
  PATCH   same as PUT, except if the resource does not exist, the devices...
  POST    Sends data to the devices to create a new data resource.
  PUT     Send data to the devices to create or update the data resource.

You can read all the above information, but this is more or less same info which already exist in this readme file. The important key of information here, are the commands, as you can see there are about 5 commands available which are basically CRUD operation for the Restconf API. We can again -h or --help flag to see the information inside each of these commands. Let's check each of them and see what command options are available.

For GET operation command options, simply run restconf-cli GET --help or restconf-cli GET -h

(.venv) expert@expert-cws:~$ restconf-cli GET --help
Usage: restconf-cli GET [OPTIONS]

  Method to retrieve operational or config data from the devices.

  Default header for the requests are 'application/yang-data+json'

  Example:

  # Display output on the terminal 
  $ restconf-cli GET -u developer -n sandbox-iosxe-latest-1.cisco.com \ 
  -p Cisco-IOS-XE-native:native/version \ 
  -a application/yang-data+json \ 
  -c application/yang-data+json 
  
  # Display output on the terminal and save the output on a file defined with --output or -o flag 
  $ restconf-cli GET -u developer -n sandbox-iosxe-latest-1.cisco.com \ 
  -p Cisco-IOS-XE-native:native/interface \ 
  -o output.json

Options:
  -o, --output FILENAME    Output will be written to a file
  -c, --content-type TEXT  Content-Type header for restconf api, default is
                           application/yang-data+json

  -a, --accept TEXT        Accept header for restconf api, default is
                           application/yang-data+json

  -pn, --port INTEGER      Port number for restconf api, default is 443
  -p, --path TEXT          Path for restconf api call  [required]
  --password TEXT          Password for restconf api
  -u, --username TEXT      Username for restconf api  [required]
  -n, --hostname TEXT      Device hostname or IP address for the restconf API
                           [required]

  -h, --help               Show this message and exit.

For POST operation command options, run restconf-cli POST --help or restconf-cli POST -h

(.venv) expert@expert-cws:~$ restconf-cli POST -h
Usage: restconf-cli POST [OPTIONS]

  Sends data to the devices to create a new data resource.

  Example:
  
  # Configure via raw data for POST operation
  $ restconf-cli POST -u developer -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces \ 
  -d '{
  "interface":[
      {
          "name":"Loopback999",
          "description":"created by python click - POST",
          "type":"iana-if-type:softwareLoopback",
          "enabled":true,
          "ietf-ip:ipv4":{
              "address":[
              {
                  "ip":"10.0.1.10",
                  "netmask":"255.255.255.255"
              }
            ]
          }
        }
      ]
    }'
  
  # Configure from file for POST operation
  $ restconf-cli POST -u developer \ 
  -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces -ff interface.json

Options:
  -ff, --from-file FILENAME  Read the playload from file for POST operation
  -d, --data TEXT            Playload to be sent for POST, PUT and PATCH
                             methods

  -c, --content-type TEXT    Content-Type header for restconf api, default is
                             application/yang-data+json

  -a, --accept TEXT          Accept header for restconf api, default is
                             application/yang-data+json

  -pn, --port INTEGER        Port number for restconf api, default is 443
  -p, --path TEXT            Path for restconf api call  [required]
  --password TEXT            Password for restconf api
  -u, --username TEXT        Username for restconf api  [required]
  -n, --hostname TEXT        Device hostname or IP address for the restconf
                             API  [required]

  -h, --help                 Show this message and exit.

For PUT operation command options, run restconf-cli PUT --help or restconf-cli PUT -h

(.venv) expert@expert-cws:~$ restconf-cli PUT -h
Usage: restconf-cli PUT [OPTIONS]

  Send data to the devices to create or update the data resource.

  Example:
  
  # Configure via raw data for PUT operation
  $ restconf-cli PUT -u developer -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces \ 
  -d '{
  "interface":[
      {
          "name":"Loopback999",
          "description":"created by python click - PUT",
          "type":"iana-if-type:softwareLoopback",
          "enabled":true,
          "ietf-ip:ipv4":{
              "address":[
              {
                  "ip":"10.0.1.10",
                  "netmask":"255.255.255.255"
              }
            ]
          }
        }
      ]
    }'
  
  # Configure from file for PUT operation
  $ restconf-cli PUT -u developer \ 
  -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces/interface=Loopback999 -ff interface.json

Options:
  -ff, --from-file FILENAME  Read the playload from file for PUT operation
  -d, --data TEXT            Playload to be sent for POST, PUT and PATCH
                             methods

  -c, --content-type TEXT    Content-Type header for restconf api, default is
                             application/yang-data+json

  -a, --accept TEXT          Accept header for restconf api, default is
                             application/yang-data+json

  -pn, --port INTEGER        Port number for restconf api, default is 443
  -p, --path TEXT            Path for restconf api call  [required]
  --password TEXT            Password for restconf api
  -u, --username TEXT        Username for restconf api  [required]
  -n, --hostname TEXT        Device hostname or IP address for the restconf
                             API  [required]

  -h, --help                 Show this message and exit.

For PATCH operation command options, run restconf-cli PATCH --help or restconf-cli PATCH -h

(.venv) expert@expert-cws:~$ restconf-cli PATCH -h
Usage: restconf-cli PATCH [OPTIONS]

  same as PUT, except if the resource does not exist, the devices MUST NOT
  create one.

  Example:
  
  # Configure via raw data for PATCH operation
  $ restconf-cli PATCH -u developer -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces \ 
  -d '{
  "interface":[
      {
          "name":"Loopback999",
          "description":"created by python click - PATCH",
          "type":"iana-if-type:softwareLoopback",
          "enabled":true,
          "ietf-ip:ipv4":{
              "address":[
              {
                  "ip":"10.0.1.10",
                  "netmask":"255.255.255.255"
              }
            ]
          }
        }
      ]
    }'
  
  # Configure from file for PATCH operation
  $ restconf-cli PATCH -u developer \ 
  -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces/interface=Loopback999 -ff interface.json

Options:
  -ff, --from-file FILENAME  Read the playload from file for PATCH operation
  -d, --data TEXT            Playload to be sent for POST, PUT and PATCH
                             methods

  -c, --content-type TEXT    Content-Type header for restconf api, default is
                             application/yang-data+json

  -a, --accept TEXT          Accept header for restconf api, default is
                             application/yang-data+json

  -pn, --port INTEGER        Port number for restconf api, default is 443
  -p, --path TEXT            Path for restconf api call  [required]
  --password TEXT            Password for restconf api
  -u, --username TEXT        Username for restconf api  [required]
  -n, --hostname TEXT        Device hostname or IP address for the restconf
                             API  [required]

  -h, --help                 Show this message and exit.

For DELETE operation command options, run restconf-cli DELETE --help or restconf-cli DELETE -h

(.venv) expert@expert-cws:~$ restconf-cli DELETE -h
Usage: restconf-cli DELETE [OPTIONS]

  Method to delete the target resource

  Example:
  
  $ restconf-cli DELETE -u developer -n sandbox-iosxe-latest-1.cisco.com \ 
  -p ietf-interfaces:interfaces/interface=Loopback999

Options:
  -n, --hostname TEXT      Device hostname or IP address for the restconf API
                           [required]

  -u, --username TEXT      Username for restconf api  [required]
  --password TEXT          Password for restconf api
  -p, --path TEXT          Path for restconf api call  [required]
  -pn, --port INTEGER      Port number for restconf api, default is 443
  -a, --accept TEXT        Accept header for restconf api, default is
                           application/yang-data+json

  -c, --content-type TEXT  Content-Type header for restconf api, default is
                           application/yang-data+json

  -h, --help               Show this message and exit.

Notice there are some examples mentioned in the above output for every command, we will explore these in the next section.

Examples

For the sake of testing, I am going to use Cisco Always-on IOSXE device sandbox-iosxe-latest-1.cisco.com which uses the 443 default port for Restconf and both Accept and Content-type headers are application/yang-data+json, which makes our CLI command earsier as these options are default for restconf-cli.

restconf-cli GET -u developer -n sandbox-iosxe-latest-1.cisco.com -p Cisco-IOS-XE-native:native/version
(.venv) expert@expert-cws:~$ restconf-cli GET -u developer -n sandbox-iosxe-latest-1.cisco.com -p Cisco-IOS-XE-native:native/version
Password: 
{
  "Cisco-IOS-XE-native:version": "17.3"
}


Status: 200 OK

The output will be colorful as restconf-cli cli uses the rich module to print colorful output.

For more examples, please check the examples folder.

Issues

Please raise an issue or pull request if you find something wrong with this module.

Authors

Muhammad Rafi

References

https://click.palletsprojects.com/en/8.1.x/

https://click.palletsprojects.com/en/7.x/changelog/#version-7-1-2

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages