Important notice: Don't install the app on your mobile device. Download and run it on your PC. This creates a local web server to which you connect via an IP address.
Existing users: Don't forget to replace the "mobiflight-event-module" in the Community folder!
Changelog Version 1.9.1
- Added controls profile for the Ju-52 Classic and Retrofit by Asobo
- Improved UI for all NAV controls
- Removed pop-up for panel switches
- Added approximate G-forces at touchdown in the Data tab
Features:
- Moving map (Open Street Maps).
- Load flight plan into the map.
- NAV 1/2 frequency and OBS 1/2 selection.
- ADF frequency and ADF card selection.
- COM 1/2 and transponder selection.
- Autopilot with altitude, vertical speed, and airspeed settings.
- GPS controls.
- Gyro drift and altimeter pressure settings.
- Light controls.
- Pitot heat and deicing controls.
- Gear, flaps and spoilers.
- Trim (elevator, rudder and aileron).
- Landing ratings (vertical speed at touchdown).
- Simulation rate controls.
List of Aircraft Controls Profiles:
- Default GNS430/530 and G1000 (to be used with default MSFS planes and other third-party planes without dedicated controls profiles)
- A320 by Asobo
- A32NX by FlyByWire
- CRJ-550/700 by Aerosoft
- DC-6 by PMDG
- FG-1D Corsair by MilViz
- Ju-52 Classic and Retrofit by Asobo
- Long-EZ by IndiaFoxtEcho
- MB-339 by IndiaFoxtEcho
- PA-28R Arrow III (GPS100, GNS530, GNS Dual) by Just Flight
Known Issues:
- Heading AP button on the Ju-52 Retrofit cannot be operated due to SimConnect limitations.
- Tuning NAV frequencies on the CRJ will only work if the two radio tuning units (RTU) are in their default state e.g., no sub-menu selected, NAV1 selected on the left RTU and NAV2 selected on the right RTU.
- Changes to COM frequencies in the A320 will not be shown in the cockpit but will work nevertheless. To force an update of the frequency in the cockpit switch from VHF1 to VHF2 and then back to VHF1 (this is for COM1 frequencies).
- When using the Load Flight Plan button without having a waypoint programmed in your plane’s GPS, you might see a dashed violet line pointing towards 0,0 GPS coordinates or to your last GPS waypoint from your previous flight.
- NAV frequencies can get out of sync, especially when rapidly pressing frequency adjustment buttons. Use the "Force Sync Frequencies" button to synchronize frequencies with the sim.
- NAV frequencies may not automatically synchronize when starting a second flight. Use the "Force Sync Frequencies" button to synchronize frequencies with the sim.
- You may see landings with a vertical speed between 0 and 5 fpm in the app. This is caused by the sim recording the plane loading on the ground at the start of a flight as a landing.
- The app may not work on a fresh Windows 10 installation. You may see a "Could not find MSFS running. Please launch MSFS first and then restart the MSFS 2020 Mobile Companion App." message even if MSFS is running. To fix this, please download and install the Microsoft Visual C++ 2015 Redistributable.