Skip to content

moon-wreckers/sensorslab

Repository files navigation

						Team[I]:Sensor Labs 
								MRSD'18
						Doc. Created: 10 Oct, 2017
						Last Edited: 12 Oct, 2017		
Team and Responsibilities:
	UI - Dan
	Abdul - DC motor (presume) + Flex sensor
	Matt - PID control of a DC motor (geared?)
	David - Servo + Slot Sensor + DC Motor
	Karthik - Stepper motor and (not encoder!) check with Yoga
	
Clutter 
- which pins are being utilized for what?
- Wiring diagram (schematic)?
-

Assignment Description:

Implementation detials and references:
Stepper motor driver Detail:
CAUTION: DO NOT REWIRE while the system (motor/ driver is powered)
- Pololu  (A4988 stepper motor driver)
- Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection
- Been in use since 2009 (LTE)
- Over current and over temperature protection of the driver module
- five different micro-stepping resolutions (upto 1/16)
- Operating range 8V to 35V and upto 1A (w/o heat sink)
- can control one bi-polar stepper motor 2A o/p current per coil
- Requires a supply voltage of 3 to 5.5V across VDD and GND
- 8 to 35V across VMOT and GND
- supply has to have appropriate decoupling capacitors (close to the board), able to deliver peak current of 4A
- CAUTION: using power leads longer than a few inches - can cause spikes exceeding the 35V rating 
- SOLUTION: put a large (at least 47 µF) electrolytic capacitor across (VMOT) and GND close to the board 

Stepper Motor diagram
https://www.sparkfun.com/datasheets/Robotics/SM-42BYG011-25.pdf


 

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages