This small program emulates the ET340 Energy Meter in a Victron ESS System. It reads values from an existing SMA Home Manager 2.0, and publishes the result on dbus as if it were the ET340 meter.
Use this at your own risk, I have no association with Victron or SMA and am providing this for anyone who already has these components and wants to play around with this.
I use this privately, and it works in my timezone, your results may vary
First ensure that this will work: Try out https://github.com/mitchese/sma_home_manager_printer which will run on your Victron GX device and try to connect to the SMA meter. The above test program does not publish its result on dbus for use by victron, only prints out the result for your verification. It should be relatively safe to test with.
If the sma_home_manager_printer works and shows consistent/reliable result, then you can
install this in the same way.
christian1980nrw has created a nice and easy install script, just run the install.sh which should do everything below. This is not immutable, so only run it once, if it fails then follow the manual setup below
You don't need to compile the source code if you don't want to (see compiling below). Head over to the releases and download the latest version. then:
- Unzip the release zipfile, which contains the "shm-et340" binary compiled for ArmV7
- Review how to setup root access on the device
- Use SCP (
scp ./shm-et340 [email protected]:) or WinSCP to copy the shm-et340 to the Venus - SSH in to the venus (
ssh [email protected]) and finally run it./shm-et340)
While this is running, you should see correct values for a grid meter in your Venus UI:
On the console of your GX device, you should see regular updates, around once per second:
root@victronvenusgx:~# ./shm-et340
INFO[0000] Successfully connected to dbus and registered as a meter... Commencing reading of the SMA meter
INFO[0000] Meter update received: 6677.15 kWh bought and 3200.45 kWh sold, 681.3 W currently flowing
INFO[0001] Meter update received: 6677.15 kWh bought and 3200.45 kWh sold, 694.1 W currently flowing
INFO[0002] Meter update received: 6677.15 kWh bought and 3200.45 kWh sold, 686.3 W currently flowing
If this does not work, try to export LOG_LEVEL="debug" first, which should print out significantly more
information on what's happening.
The above steps will start it once, which will run until the next reboot. Doing the following will start it on every boot
Thanks to ricott for the tip here. The full description of how to start on boot
can be found here. Basically, add the call to /data/rc.local.
Mine tried to start before the network was up, which resulted in an error and it not starting. To 'fix' this, I just wait 15s in the rc.local before trying to start the script ... not great but it works.
root@beaglebone:~# cat /data/rc.local
!#/bin/bash
sleep 15
setsid /data/home/root/shm-et340 > /dev/null 2>/dev/null &
root@beaglebone:~# ls -l /data/rc.local
-rwxr-xr-x 1 root root 81 Feb 18 15:38 /data/rc.local
For windows, and more detailed instructions, head on over to Schnema1's fork
To compile this for the Venus GX (an Arm 7 processor), you can easily cross-compile with the following:
GOOS=linux GOARCH=arm GOARM=7 go build
For more details, see the thread on the Victron Energy community forums here:
https://community.victronenergy.com/questions/49293/alternative-to-et340-mqtt-sma-home-manager.html
If you are using multiple SMA meteres (example, a Sunny Home Manager and a Energy Meter 2) in the same network, you will need to provide the serial number of which meter you want this to follow.
Example:
SMASUSYID=1234567890 ./shm-et340
This is the meters' serial number, which can be found in the web UI of your inverter under Device Configuration -> Meter on Speedwire -> Serial
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.
- Setup a start/stop script and describe how to install as a system service
- Make builds and releases automatic
- Test against fw upgrades of the Venus OS
- Handle a power failure of the Home manager (or other network issues preventing updates)
