Merge pull request #356 from meshtastic/position-lite

PositionLite draft

meshtastic/deviceonly.options

@@ -3,6 +3,7 @@
 
 # FIXME pick a higher number someday? or do dynamic alloc in nanopb?
 *DeviceState.node_db max_count:80
+*DeviceState.node_db_lite max_count:80
 
 # FIXME - max_count is actually 32 but we save/load this as one long string of preencoded MeshPacket bytes - not a big array in RAM
 *DeviceState.receive_queue max_count:1
@@ -13,4 +14,6 @@
 *OEMStore.oem_icon_bits max_size:2048
 *OEMStore.oem_aes_key max_size:32
 
-*DeviceState.node_remote_hardware_pins max_count:12
+*DeviceState.node_remote_hardware_pins max_count:12
+
+*NodeInfoLite.channel int_size:8

meshtastic/deviceonly.proto

@@ -5,6 +5,7 @@ package meshtastic;
 import "meshtastic/channel.proto";
 import "meshtastic/localonly.proto";
 import "meshtastic/mesh.proto";
+import "meshtastic/telemetry.proto";
 import "meshtastic/module_config.proto";
 
 option csharp_namespace = "Meshtastic.Protobufs";
@@ -32,9 +33,10 @@ message DeviceState {
  User owner = 3;
 
  /*
- * TODO: REPLACE
+ * Deprecated in 2.1.x
+ * Old node_db. See NodeInfoLite node_db_lite
  */
- repeated NodeInfo node_db = 4;
+ repeated NodeInfo node_db = 4 [deprecated = true];
 
  /*
  * Received packets saved for delivery to the phone
@@ -77,6 +79,79 @@ message DeviceState {
  * The mesh's nodes with their available gpio pins for RemoteHardware module
  */
  repeated NodeRemoteHardwarePin node_remote_hardware_pins = 13;
+
+ /*
+ * New lite version of NodeDB to decrease
+ */
+ repeated NodeInfoLite node_db_lite = 14;
+}
+
+message NodeInfoLite {
+ /*
+ * The node number
+ */
+ uint32 num = 1;
+
+ /*
+ * The user info for this node
+ */
+ User user = 2;
+
+ /*
+ * This position data. Note: before 1.2.14 we would also store the last time we've heard from this node in position.time, that is no longer true.
+ * Position.time now indicates the last time we received a POSITION from that node.
+ */
+ PositionLite position = 3;
+
+ /*
+ * Returns the Signal-to-noise ratio (SNR) of the last received message,
+ * as measured by the receiver. Return SNR of the last received message in dB
+ */
+ float snr = 4;
+
+ /*
+ * Set to indicate the last time we received a packet from this node
+ */
+ fixed32 last_heard = 5;
+ /*
+ * The latest device metrics for the node.
+ */
+ DeviceMetrics device_metrics = 6;
+
+ /*
+ * local channel index we heard that node on. Only populated if its not the default channel.
+ */
+ uint32 channel = 7;
+}
+
+/*
+ * Position with static location information only for NodeDBLite
+ */
+message PositionLite {
+ /*
+ * The new preferred location encoding, multiply by 1e-7 to get degrees
+ * in floating point
+ */
+ sfixed32 latitude_i = 1;
+
+ /*
+ * TODO: REPLACE
+ */
+ sfixed32 longitude_i = 2;
+
+ /*
+ * In meters above MSL (but see issue #359)
+ */
+ int32 altitude = 3;
+
+ /*
+ * This is usually not sent over the mesh (to save space), but it is sent
+ * from the phone so that the local device can set its RTC If it is sent over
+ * the mesh (because there are devices on the mesh without GPS), it will only
+ * be sent by devices which has a hardware GPS clock.
+ * seconds since 1970
+ */
+ fixed32 time = 4;
 }
 
 /*
@@ -175,4 +250,4 @@ message NodeRemoteHardwarePin {
  * The the available gpio pin for usage with RemoteHardware module
  */
  RemoteHardwarePin pin = 2;
-}
+}