use board definition for mesh-tab

boards/mesh-tab.json

@@ -16,7 +16,7 @@
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "hwids": [["0x303A", "0x1001"]],
+    "hwids": [["0x303A", "0x80D6"]],
     "mcu": "esp32s3",
     "variant": "mesh-tab"
   },

variants/mesh-tab/pins_arduino.h

@@ -0,0 +1,65 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include "soc/soc_caps.h"
+#include <stdint.h>
+
+#define USB_VID 0x303A
+#define USB_PID 0x80D6
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+static const uint8_t SS = 5;
+static const uint8_t MOSI = 35;
+static const uint8_t MISO = 37;
+static const uint8_t SDO = 35;
+static const uint8_t SDI = 37;
+static const uint8_t SCK = 36;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+
+static const uint8_t T1 = 1;
+static const uint8_t T3 = 3;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T14 = 14;
+
+static const uint8_t VBAT_SENSE = 2;
+static const uint8_t VBUS_SENSE = 34;
+
+// User LED
+#define LED_BUILTIN 13
+#define BUILTIN_LED LED_BUILTIN // backward compatibility
+
+static const uint8_t RGB_DATA = 40;
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API neopixelWrite()
+#define RGB_BUILTIN (RGB_DATA + SOC_GPIO_PIN_COUNT)
+#define RGB_BRIGHTNESS 64
+
+static const uint8_t RGB_PWR = 39;
+static const uint8_t LDO2 = 39;
+static const uint8_t LED = 13;
+
+#endif /* Pins_Arduino_h */

variants/mesh-tab/platformio.ini

@@ -2,7 +2,7 @@
 ; https://github.com/valzzu/Mesh-Tab
 [mesh_tab_base]
 extends = esp32s3_base
-board = um_feathers3
+board = mesh-tab
 board_level = extra
 board_upload.flash_size = 16MB
 board_build.partitions = default_16MB.csv
@@ -231,4 +231,4 @@ build_flags = ${mesh_tab_base.build_flags}
   -D LGFX_TOUCH_Y_MIN=0
   -D LGFX_TOUCH_Y_MAX=479
   -D LGFX_TOUCH_ROTATION=1
-  -D LGFX_TOUCH_I2C_FREQ=1000000
+  -D LGFX_TOUCH_I2C_FREQ=1000000