Add CO2 sensing with SCD4X #10404

Job	Run time
setup (esp32)	30s
setup (esp32s3)	5s
setup (esp32c3)	23s
setup (esp32c6)	3s
setup (nrf52840)	3s
setup (rp2040)	4s
setup (stm32)	41s
setup (check)	23s
package-native / build-native / build-native	3m 37s
package-raspbian-armv7l / build-raspbian_armv7l / build-raspbian-armv7l	3m 19s
package-raspbian / build-raspbian / build-raspbian	5m 30s
check (meshtastic-diy-v1)	6m 49s
check (heltec_capsule_sensor_v3)	12m 59s
check (tbeam-s3-core)	7m 59s
build-esp32 (radiomaster_900_bandit_micro) / build-esp32	5m 42s
build-esp32 (tlora-v2-1-1_6) / build-esp32	13m 13s
build-esp32 (tlora-v2-1-1_8) / build-esp32	5m 40s
build-esp32-c3 (heltec-hru-3601) / build-esp32-c3	11m 22s
build-esp32-c3 (heltec-ht62-esp32c3-sx1262) / build-esp32-c3	4m 3s
build-esp32-s3 (heltec-vision-master-t190) / build-esp32-s3	4m 1s
build-esp32-s3 (tbeam-s3-core) / build-esp32-s3	4m 11s
build-esp32-s3 (t-deck) / build-esp32-s3	5m 4s
build-esp32-c6 (tlora-c6) / build-esp32-c6	4m 27s
build-nrf52 (rak2560) / build-nrf52	3m 59s
build-nrf52 (nano-g2-ultra) / build-nrf52	3m 46s
build-nrf52 (wio-tracker-wm1110) / build-nrf52	3m 44s
build-rpi2040 (feather_rp2040_rfm95) / build-rpi2040	4m 9s
build-rpi2040 (pico) / build-rpi2040	3m 58s
build-rpi2040 (picow) / build-rpi2040	4m 54s
build-stm32 (rak3172) / build-stm32	2m 36s
build-stm32 (wio-e5) / build-stm32	2m 36s
package-raspbian-armv7l / package-raspbian_armv7l	26s
package-native / package-native	26s
package-raspbian / package-raspbian	27s
after-checks	8s
gather-artifacts	0s
release-artifacts	0s
release-firmware	0s
	2h 11m 17s

Provide feedback